Question about Kingston flash memory card - 256 MB - MMCplus Graphic Card

1 Answer

Pen Drive Connect to issue

The instruction at "0x10013e7a" referenced memory at "0x01127f18". The
memory could not be "read"

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 119 Answers
Re: Pen Drive Connect to issue

Firts of all try to clean the contact of the card...but poor chance to this error persists,it might be  damaged..
oh..try to format it..maybe will help.

Posted on Feb 03, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Pen drive does not have memory space

Dear sir,
Kindly insert your pen drive in a PC or laptop and then go to my computer and make right click on the pen drive option then click on the format option and format it.After completing the format checkout the space your problem is solved.
Note: If the problem still persist then please contact Transcend customer care center.

Dec 31, 2012 | Transcend TS8GJFV30 - 8GB JetFlash V30...

1 Answer

I have 4 gb kingston pen drive can i use it as graphic card?????????

hit it with a hammer and then plug it to your usb port. it will definately work just like you have upgraded your graphic card to 3.7 gb.

Jul 06, 2010 | Kingston flash memory card - 256 MB -...

1 Answer

My pen drive is only reading data in one computer, its showing data error in when connected to other computer, how can i solve this problem?

This is most likely due to a damaged or dirty female connector on the "data error"'ing computer. Try blowing some compressed air in the slot, or looking inside to see if there is some lint inside; it happened to me with a SD card once.
Try loading the pen drive onto a third computer to exclude the (very unlikely) possibility that the flash drive is borderline faulty (e.g., requires a slightly higher voltage than normal to be read).

May 18, 2010 | Kingston flash memory card - 256 MB -...

1 Answer

Computer opens pen drive but does not see any data. the drive is assigned a drive letter and does not conflict with any other drive letters. It is detected when inserted, and shows up in device manager....

One or more of the hints below will probably sort out most USB problems with most USB portable / external hard drives and OTHER devices (though not always)

A few things to check but assumes USB and Windows for other interfaces / operating systems (mac/ Linux) similar steps may be adapted to suit.

1. Ensure it is connected directly to the computer to a USB 2.0 port not a USB 1.0 port as this can have effects on performance and reliability

2. Use only the cables that came with it NOT one that fits that may have been lying around or is longer. Not all USB cables are equal even though they should be)

3. Do not connect through an external USB HUB unless that hub is USB 2.0 AND has its own power supply.

4. Use ONLY the power supply that came with it if it has an external power supply Don’t use any other unless you know it has both the same voltage and current rating e.g. 12V 500mA anything rated below that would not work properly.

5. Always use the same port for connecting your devices. Some devices do not like being switched about. If switched they may want to install software / drivers again. This can be especially true if you move a HUB to another port

6. For FLASH DRIVES you should ensure that the device is set for "quick removal" using the drive control panel properties or use the USB "Safely Remove Hardware" option. If you dont do this there is a very strong chance that any files you transfer may not be there when you plug into another computer.

7. It is possible to remove drives from the enclosures in most cases and connect directly inside a PC to fully check it.
You should also do this to cheack the drives connections are not bad inside the enclosure.

8. If none of the above steps help look at updating the drivers from the manufacturers web site in the support section.

9. If you checked and fixed anything there and still have issues then check your hardware from CONTROL PANEL / SYSTEM / HARDWARE.

Any exclamation marks by hardware need fixing before you investigate any further
USB flash drives can fail for no apparent reason.
Sandisk Cruzers are especially bad for this.
For some unknown reason some flash drives seem to forget they are formatted and holding data. Re-formatting is a quick fix but does mean you loose information.

USB hard drives should be treated with extreme care.
This is a real hard drive ! and knocks and bumps can quite literally kill them.

Note that if you hear a drive clicking or pinging this could be the worst thing you would hear.
Known as "The Click Of Death"

Oct 22, 2009 | PNY Technologies GeForce 6200 128MB AGP...

1 Answer

My pen drive does not open how to get my files in it pen drive malfunctioned

There might be several reasons.

may be the drive is spoiled or infected with virus that is not letting you to use the drive. there is also a possibility of having problem with the USB drive of your computer..

Try to connect on different USP port.
Try with different system with good antivirus

Low level formatting might help

finally contact the vendor if the drive is on lifetime warranty.

Sep 17, 2009 | Kingston flash memory card - 256 MB -...

1 Answer

Memory loosing problem

Open notepad
There write the below code

Now save as RAMcleaner.VBS

Open it and will clear your memory from unneeded cookies

Jul 15, 2009 | Kingston flash memory card - 256 MB -...

1 Answer

2gb kingston rs mmc write protected only 835 mb work

This seems to be the problem of most of us these days and some of our readers who wanted to know the methods how they can remove the Write Protected error from their USB drives like Pen Drives and memory cards.

What is Write Protected error and why it happens?
In the Write Protected error, we can’t write or copy any data in our flash drives and even can’t format the drive.
There are many reasons that cause this problem, let’s see solutions of them.
• First of all try to locate a small switch (if any, that you may have not noticed) at some place on the drive or memory card reader. This is the prime reason for this error. If there is one, switch it to the other side to turn the protection off.
• Yes I know this problem is also occurring these days without this switch but not to worry. Just download this helpful software form here

and run it to execute a “low-level format” on the drive. This software is quite handy and may take few attempts to actually remove the error.
• The problem can also be caused by some virus activity so just get it scanned by some updated good anti virus which may solve your problem.
• BUT if none of the methods listed above solves your problem then your pen drive might have gone corrupted, so just get it replaced.
Hope any of the methods listed above solves your problem.
Update 1:
After the low level format, you may need to “Partition the drive“. Dont worry, partitioning a pen drive means allocating it its File System and Cluster Size that was lost after the Low Level Format.
For that:
  1. Run diskmgmt.msc in Run.
  2. In the disk management window, select the pen drive, right click on it and click on Format.
  3. Now choose the File System and Allocation Unit Size and do not check the boxes below.

Click OK and the drive will be reusable after this.
Update 2 (Better Solution):
Follow the steps in this post and just put the value 0 (zero) in step 5.
This will surely solve your problem now.

rate me and vote me..

May 13, 2009 | Kingston flash memory card - 256 MB -...

1 Answer

I need to format my pen drive

1. Download this tool:

2. Format

(Before removing USB flash drive click on the Safely Remove
Hardware icon and then click on USB flash drive you want to remove)

Apr 04, 2009 | Kingston flash memory card - 256 MB -...

2 Answers

Increase the Memory capacity

throw it away and buy a new one from a store. They are not very expensive compared to being "duped by a guy" or loosing data or files due to a bad device.

Apr 02, 2009 | Kingston flash memory card - 256 MB -...

1 Answer



I would venture that your pen drive has a problem with its File Allocation Table. Being a 256 leads me to think that it has been in service for quite some time. Perhaps a full format is necessary. May I recommend that you use HP Drive Key Boot Utility available here. Of course formatting would erase all and everything inside the pen drive.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Mar 25, 2008 | Kingston flash memory card - 256 MB -...

Not finding what you are looking for?
Graphics Cards Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kingston Graphics Cards Experts


Level 3 Expert

281 Answers


Level 3 Expert

634 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Kingston Graphics Card Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides