Question about JVC AV-27D202 27" TV

1 Answer

Program satelite or cable

Could someone give me instructions to program cable or satelite. I've tried numerous times, it says it is programing channels, it goes up to 125 shuts down and nothing happens

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Expert
  • 84 Answers
Re: Program satelite or cable

You are not specific as to programming cable or satellite .if you have cable tv with a cable box there is no need to program tv channels.the tv should be left on channel 3.check the back of the cable box & tv it may also be connected thru rca/s-video or componant cables meaning the tv should be on a line in/source ,or video input. for a tv without a cable box
you can do the auto or manual programming. no need to be on channel 3. if you have satelllite tv you need the box to hook up to your cannot bypass this box unlike cable tv.also check the back of the box for the other possible connections
good luck

Posted on Jan 28, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My remote will not operate the tv. how can i reset

The most common problem that causes this is the batteries in the remote.
Try replacing them with fresh batteries. Make sure that they are in correctly, they will only work in one certain position. Next make sure that nothing is obscuring the Infrared Sensor on the front of the set.

If the remote does absolutely nothing after these checks I would suggest purchasing a universal remote control, follow the instructions that come with it to program it for your particular brand. There may be several different codes for your brand of TV. You might need to try all of them one at a time to find the correct one. When you find the correct one I suggest that you save the little booklet that comes with the universal remote in case you need to program it for a different TV or have to re-program it again. It will give you step by step instructions. There may be a search function on the new remote that will allow you to simplify the programming.


Jun 04, 2010 | Standard (CRT) Televisions

2 Answers

Toshiba SD-V295KU DVD/VCR Setup

Hi, David.

This unit does not have a TV tuner built in. It can record only from a video/audio source such as a satellite receiver or cable box. That's why you can't find anything in the manual about programming a channel. It doesn't offer that capability.

Not the answer you were looking for, but that's what they give you. The only solution I can offer is to keep your old VCR or pick one up at a thrift shop, and use it as the signal source. Program it to come on at the desired time on the channel you want, and use its video/audio outputs as the source for your recorder. Program the recorder to start at the same time.

Kinda klunky, but it would work.

Jan 30, 2009 | Toshiba 27DF46 27" TV

1 Answer

Can't figure out how to turn on cable on Sony Trinitron TV

Setting Up the TV
After you have finished connecting your TV, you can use Auto Program to set up your
channels. During Auto Program, the TV will automatically search for available channels and
program receivable channels.
(Make sure CABLE is connected on coaxial and you are not using any other connections such as cable box, hdtv or satellite antenna)

1 Press to turn on the TV. The Initial Setup screen appears.
2 Press on the remote control or on the TV front panel to start Auto Program, or press
to exit.
To perform Auto Program again
Press .
2 Press g to highlight Channel Menu.
3 Press f to highlight Cable. Press to select.
4 Press F or f to highlight On or Off according to how you connected your TV. Press to
5 Press f to highlight Auto Program. Press to search for channels.
6 After Auto Program finishes, press to exit.
To reset the TV to factory settings
Turn the TV on.
2 Hold down on the remote control.
3 Press and release the POWER button on the TV front panel. The TV will turn itself off,
then back on.
4 Release .
✍ When you start Auto Program wait until it is finished; otherwise it will skip over channels that are
available. Perform Auto Program again to program receivable channels.
✍ The Initial Setup screen appears each time you turn on the TV until you perform Auto Program.
Initial Setup
Auto Program [CH+]
First please connect

Jan 17, 2009 | Sony FD Trinitron WEGA KV-24FS120 24" TV

2 Answers

How to program a universal remote control for a tv?

One of my problem is how to doneload schematics

Apr 30, 2008 | Standard (CRT) Televisions

2 Answers

Cable tv won't work on my TV

go into the menu of the tv and program the channels into it. you will have to tell the tv if you have cable or a anntena, then select auto program. if you do this and the tv still has no channels, try unplugging it for 30 min and try again, if still not working it needs to go into a repair shop.

Mar 20, 2008 | Samsung TXL3276 32" TV

1 Answer

Picture goes Black

that is easy one go to options menu on video look for cc or closed caption option and turn that off

Jan 12, 2008 | Hitachi 43FDX01B TV

1 Answer

Digital reception

Check the menu screen to see if you have an option to program digital channels . If not the answer is no . If you are on cable or satelite then you need not worry as the only people who will be affected by the digital change over will be if your on outdoor antenna or rabbitt ears only with your tv. Your cable and satelite providers will not change you over on feb 19th 2009 . Everythung will be the same . Good luck

Dec 28, 2007 | Sanyo DS31520 31" TV

1 Answer


can you enter channel 4 manually and get picture

Nov 19, 2007 | Zenith Z19A11S TV

2 Answers

Won't tune in all channels

Do you mean the channels from the internal tuner which would be channels 22 to 68, or do you mean satelite channels, as I do not know whether this set has a built in satelite receiver? Satelite broadcasters are often changing frequencies or satelites.- Programs come and go!

Oct 20, 2006 | RCA F27440 27" TV

Not finding what you are looking for?
JVC AV-27D202 27" TV Logo

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66476 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a JVC Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides