Question about Cyber Acoustics AC-740 Headset

1 Answer

AC-740 : No Manual

My AC-740 headset/microphone didn't come with a manual. How do I set it up?

Posted by on

  • fogsd820 Jan 28, 2008

    Uh...what? It's got one for mic and one for headset, and I've got it plugged into the spot on the front of my computer for mic and headset. But when I plug it in, nothing happens.

  • Anonymous Feb 12, 2009

    do i need a driver?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,067 Answers

Does it have 2 plugs one for mic and headset or sterio plug for mono head set mono mic u would need input on phone that can accept that kinda sterio input ok for both

Posted on Jan 28, 2008

  • nick helpap
    nick helpap Jan 28, 2008

    try the back prot ok on sound card cuse maby your front jacks aint pluged in ok

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ac-648 mic not working


Either you have connected to the wrong socket on your computer, or the controls on your computer have not been set up. For example the microphone circuit is switched off or set too low for recording.

Jul 12, 2013 | Cyber Acoustics AC-648 Headset - Stereo...

1 Answer

I bought a soncm headphones sm-750mv but when I try to use the microphone it doesn't work. No manual.


This headset is pure bad. I have three and none of them worked. The manufacturer has no quality control or post production inspection. To fix the mic problem, open the earphone to which the mic is attached. You\'re likely to find that the mic wires are SHORTED together in a single piece of paper tape. Remove the tape, separate the wires and retape, assuming the tiny thin wires don\'t break in whic case you need to resolder the joins. Had the manufacturer any kind of QC, the faults would have been immediately obvious.

Jan 19, 2012 | Acer Aspire Computers & Internet

1 Answer

Bought new dynex dx-740 earclip headset with microphone. earpiece works but computer not picking up microphone.


Have you installed the software for your headphone? Your computer might not pick up your device because it doesn't recognize the device.

Mar 06, 2011 | Dynex Earclip Headset with Noise-Canceling...

1 Answer

I lost the manual, if there was one, after I bought the product: Micro Innovations MM745H Headset. Therefore, I'm wondering what driver I need for my laptop to detect the microphone when I plug it into the...


moz-screenshot-3.pngA microphone is pretty basic, if there is a socket for it i would expect the system would support it.
Check your audio system settings, sometimes the microphone is muted, or set at zero volume.

Go here:
http://audio.manualsonline.com/manuals/mfg/micro_innovations/745h_voicemaster.html

And click on the blue "Get this manual" for information on this specific to the MM745H

Jan 29, 2011 | Micro Innovations MM745H Headset

2 Answers

In recent days my headset (590A) has only been transmitting sound on the right ear via bluetooth connection, when I use the 3.5mm jack (connected to left ear) both ears work. Is there a fix for...


Your headset can be used as stereo headphones or a wireless microphone for a bluetooth enabled device like a cell phone or a computer. When you plug the headphones into a device with the 3.5mm jack the headset automatically turns into stereo headphones and disables the microphone(headphone mode). It sounds like whatever device your headset is connected to via bluetooth is using the wireless microphone protocol where sound only comes through the one speaker and the microphone is on(microphone mode). The bluetooth protocol settings of your device may have been changed accidentally. You will need to go into the bluettoth settings of your device you are using with your headset and change the protocol. If it is a cell phone you will need to go into the bluetooth settings in the settings menu. If it is a computer your can adjust the bluetooth settings in the control panel.

You can download the pdf file of your instruction manual for your headset here

I hope this was helpful and let me know if you have any other questions. Thanks for using FixYa

Oct 15, 2010 | Plantronics Pulsar 590A Wireless Headset

1 Answer

Cyber Acoustics AC-201 Micrphone Problem


i have cyber acoustics headset and i cant hear anything but my Mic works, my sound is all fine, when i plug my headset out i can hear but when its plugged in, i cant hear anything.

Mar 09, 2010 | Cyber Acoustics AC-201 Consumer Headset

1 Answer

Microphone isnt working


u have to set it up from the computer....go to control panel and audio configure and itll show the rest that would be easy for u to follow....

Oct 06, 2009 | Cyber Acoustics AC-634 Consumer Headset

1 Answer

Mic picks up background noise, even though it's not supposed to


If it's an H series, it connects into an M12 or M22 amplifier.  Change the microphone settings by looking taking off the side door and adjusting the little white wheel.  It is probably set too loud.

Apr 09, 2009 | Plantronics SupraPlus Binaural Headset

1 Answer

GN Netcom wireless headset volume adjustment


Transmit volume adjustment
Adjust the volume of transmitted sound according to personal preference.
To adjust the volume:
1. Make a telephone call and ask the person you are calling to assist
you.
2. Press the +/– buttons on the headset simultaneously for 2 seconds.
A beep will indicate when 2 seconds has passed.
3. Adjust the volume level by pressing the + or – button.
4. When the person you are speaking with fi nds the volume of your
voice appropriate, press the +/– buttons simultaneously for 2
seconds. This setting is now stored in the headset.

A Copy of the manual is avaliable at:

http://www.onedirect.es/files/GN%20Netcom-ES/GN%20Netcom%209120%20manual.pdf

You must have Adobe Reader to view it and the instructions are on page PDF page 3 or manual page 6. Adobe Reader is avaliable for download at:

http://www.adobe.com/products/acrobat/readstep2.html

May 21, 2008 | GN Netcom (9120-48) Wireless Headset

1 Answer

Plantronics GN9120 microphone is too quiet for listener


I've had this same probelm and after much pressing of buttons eventualy fixed it by reading the manual... :s

Last page page of Quick Set-Up Guide under "Transmit volume adjustment":

1.) Make call to another phone user to assist.
2.) Press + and - on the headset at the same time.
3.) Adjust volume by pressing either - and +.
4.) Confirm volume with helper.
5.) Wait for 10secs and the settings will store.

May 08, 2008 | GN Netcom GN 9120 Professional Headset

Not finding what you are looking for?
Cyber Acoustics AC-740 Headset Logo

Related Topics:

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cyber Acoustics Radio Communications Experts

Steve

Level 3 Expert

3289 Answers

Brad Brown

Level 3 Expert

17473 Answers

Marvin
Marvin

Level 3 Expert

82313 Answers

Are you a Cyber Acoustics Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...