Question about ASUS P5ND2-SLI Deluxe Motherboard

1 Answer

Wont post. This is weird. Ok, about a week ago I moved my pc, like 2 ft. Just from a stand next to my desk, to on my desk. I unplugged everything with the power off, routed all the wires through the back of my desk. Plugged in all the usual junk, with the power still off. I turned on the power supply and the proceeded to power up my pc. And.. nothing. Ok, I get the green light on my mobo, and the dvdrom led flashes. This is the P5ND2-SLI... not the deluxe. I dont even get beep codes. I pulled out the ram and nothing. I dont get a display either. Sounds dead to me, but it just happened too suddenly and right when I moved the tower. Any Ideas?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,351 Answers

Try a few things for me OK? From what you typed, turned on the psu "the toggle switch on the psu", pc seemed to be starting up. I need you to keep the toggle switch on the power supply in the on position. Press and hold the start button on the PC case to shut it down. Give it a few seconds & power up by pressing the power switch on the case. Notice a differance? Next, unplug everything connected to the pc expect the monitor, mouse & keyboard. Try to boot. Still no? Remove the side of the case exposing the board. Turn the psu off by flipping the toggle switch on the psu, wait till the green light on the board goes out. Grab the Mb ( I know it's tight in there) and see if you can move the board in any direction. Not loose? Re-check all data & power connections for a solid connect. Re-check your case to Mb connections. Also check the PSU, there is a red slide switch it should be set to 115v. Post your findings..
map

Posted on Jan 28, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed light bulb on 1993 subaru impreza now car won't start, everything lit up on the dashboard


1993 Subaru Impreza Won't Start! - NASIOC

forums.nasioc.com > ... > NASIOC Technical > Service & Maintenance
Sep 12, 2004 - 3 posts - ‎3 authors The car has been running fine, but recently in the morning especially, it won't turn over. I crank it and its trying to start, but there is no spark. Car won't start, cranks but no start. - NASIOC - North ...
19 posts
Aug 26, 2013
car wont start, getting fuel and spark - NASIOC - North ...
5 posts
May 22, 2012
HELP: Car won't start after timing belt change - NASIOC ...
19 posts
Sep 23, 2008
Weird starting problem--1993 Impreza - NASIOC ...
9 posts
Mar 4, 2003
More results from forums.nasioc.com

my 1993 impreza wrx wont start please help - ClubWRX.net

www.clubwrx.net/.../134323378-my-1993-impreza-wrx-wont-start-pleas...
Dec 5, 2009 - 7 posts - ‎2 authors can anyone help me, my 1993 impreza wrx wont start, 2 days ago i went to ...ClubWRX Forum - Subaru Impreza WRX and STi Community and ...

Oct 24, 2015 | 1993 Subaru Impreza

1 Answer

GE Profile PTS25LBMARWW - Power, but no Cold


yes the mother board is located under the plate in the back.. but when you replaced the relay did you put on a 3in1 relay or a manufactured relay?

Aug 01, 2008 | GE Profile PFS22 33" Artica French Door...

1 Answer

Screen is tinged yellow


It sounds like you're going to need a new VGA/DVI cable. (from PC to monitor)
I suggest you try another one, then post back here if it doesn't fix the problem.

I hope this helps,
Yannick.

Jun 19, 2009 | Samsung SyncMaster 172N 17" LCD Monitor

1 Answer

Freezes for 7 to 14 days then just quits!


hate to tell you but your compressor is going out on your freezer ,,, i'd look for another freezer.
Larry

Oct 28, 2008 | Danby 3.6 cu. ft. / 102 liter Chest...

1 Answer

I have a syncMaster 997 DF it is acting like it has no powere and will not come on - it has done this before when i moved it to change locations to a different desk - then the next morning i plugged it in...


probly you have loose conection...the wires that connects the monitor might be broken...try moving(shaking) the wires will it is power (AC current is given to it)...press the power jack harder into the monitor....or else it can be some internal faliure

May 10, 2008 | Computers & Internet

1 Answer

Hotpoint 25.3 cu. ft. not cooling


When the freon as been recharged, did the dryer been replaced?

Nov 25, 2007 | Hotpoint 6.67 cu. ft. / 189 liter Chest...

2 Answers

Won't spin the disk


try this link! http://www.techsupportforum.com/gaming-forum/console-gaming-support/77719-ps2-disc-wont-spin.html

Apr 02, 2007 | Sony PlayStation 2 Slimline Console

Not finding what you are looking for?
ASUS P5ND2-SLI Deluxe Motherboard Logo

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Alun Cox

Level 3 Expert

2678 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...