Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer

1 Answer

It won't agitate...

Oh man, My washer has only done about 40 loads of wash. So it's not old. I noticed with the last completed load that there was a bit of change in the bottom of the tub. I took it all out. The next load filled, then no agitation. It's not the lid latch. I fear there is something stuck under the middle ...thing. Is there any way I can take it apart?

Posted by on

  • snowshoe Jan 29, 2008

    It fills and tries to agitate .but the agitator can be stopped by hand .

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Not sure you really want to take it apart ... but usually there is some type covering in the center post that keeps water from getting to the bolt that holds the whole thing on.

Does it make noise like the motor is running to agitate?
does it spin?

Posted on Jan 27, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am looking to buy a used Frigidaire GLWS1233AS2 Top Load Washer and GLER331AS2 . They are supposed to be 3 years old. Are they good machines or do they have lots of problems?


Mine is 10 yrs old and I am just now having a problem. Clothes are too damp after last spin cycle. Hopefully, I'll get an answer here soon. Another problem I noticed a few months after I got it, with this model, is the fabric softener dispenser on top of the agitator. You have to remove it every single time and clean it. I added a little water to it before adding fabric softener and thought that would help to stretch the cleaning to maybe once or twice a week. Don't do it! I started to smell mildew and found out why. The agitator shaft that this dispenser sits on was caked with old fabric softener. I just use the blue Downey ball now. The fabric dispenser stinks but I have had 10 yrs of good washing.

Feb 14, 2013 | Frigidaire GLWS1233A Top Load Washer

3 Answers

Whirlpool top loading washer won't fill completely


did you shorten the stand pipe for the outlet drain ?if not try putting a short extension on the top .

Nov 18, 2017 | Whirlpool Washing Machines

1 Answer

Frigidaire Fex831cs Top Load Stacked Washer won't agitate


I worked on one last week which was completely dead. Some wires were cut. Took a few pics: Laundry Center repair

Service manual

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61


Jun 21, 2012 | Washing Machines

1 Answer

WASHER FILLS WITH WATER, THEN WON'T AGITATE. TURN KNOB TO SPIN AND IT DRAINS THEN SPINS. STILL WON'T AGITATE


WASHER FILLS WITH WATER, THEN WON'T AGITATE. TURN KNOB TO SPIN AND IT DRAINS THEN SPINS. STILL WON'T AGITATE please show me a diagram

Jun 14, 2011 | Whirlpool LSR7333 Top Load Washer

1 Answer

During spin cylces very load noises----bearings gone less than three old got estimate of 4-500 to fix does that sound right?


Yes, that is a good price for a main bearing repair. I wouldn't recommend it. I would buy either a whirlpool top load washer with and agitator ( we are doing to many repairs on the wp washers without agitators), or I would buy the super capacity front load duet. You will save more money in the long run with the front loader. Both of these have been the best washers built in the last 30 years. Good Luck, Appliance Specialists

Dec 15, 2010 | Kenmore Oasis 27042 Top Load Washer

1 Answer

Kenmore stopped agitating


broken motor coupling between the motor and tranny cost is about 15 bucks can get from repairclinic.com

Feb 27, 2010 | Kenmore 24032\24036 Top Load Washer

1 Answer

A sweatshirt cord is wrapped around my HotPoint top load washing machine. The machine is 18 years old. Can I pull off the agitator to retreive the string?


If it's wrapped around up underneath the agitator you can.

Have you tried just figuring out which way it was wrapped?

Keep a can of WD-40 handy.

Jan 29, 2009 | Hotpoint VBXR1090B Top Load Washer

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Sal De

Level 3 Expert

2699 Answers

Marvin
Marvin

Level 3 Expert

82322 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...