Question about 2wire 1800HG Router (RG1800HG00)

2 Answers

How to use 1800 HG on a non BT IP

I am trying to use 2wire 1800HG on an IP outside the UK. I downloaded the latest device drivers from http://www.btopenworld.com/drivers and have successfully installed them. I have connected the router to my pc via usb and the device appears in windows device manager under the network adapter tab. Both the power and local network LEDs are lit green. The broadband link LED however when the DSL cable is plugged flashes green instantenously before being lit red. I tried getting on the gateway page to configure my router but the page cannot be displayed. (it appears that in order to use the configuration page the router must first be capable of recognising the DSL signal) I can get online using a modem my IP provided me with but the router configuration page cannot be displayed. I did some research and I think that the router is locked to BT. My problem could be solved by flashing my router's firmware with an unlocked version, but so far I haven't found anything for the particular model. The inability to log onto the manufacturers gateway (not website) complicates things further. Any help or advice is welcome.

Nik

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

You still need a dsl signal (steady green light on broadband link) before you could gain access to the gateway page

Posted on Feb 19, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I got all green lights on my route and was working a week ago but for some reason it has stop work. please help

Posted on Feb 10, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2WIRE 1800hg wont allow UPnP device to connect


TRY THIS AT http://support.2wire.com/?page=view&article=133&text=Sony%20streaming%20media%20player&cat=&sort=

Nov 27, 2011 | 2wire 1800HG Router (RG1800HG00)

1 Answer

What would be a comparable upgrade from the 1800?


if you prefer the same brand then go for 2wire 2701hg-b if non-uverse customer

Jan 25, 2010 | 2wire 1800HG Router (RG1800HG00)

1 Answer

New dell computer w/vista


set you pc to automatic assign IP address and DNS server under tcp/ip settings, your computer should acquire the correct settings from your 2wire.

Nov 15, 2008 | 2wire 1800HG Router (RG1800HG00)

1 Answer

1800 hg 2 wire wireless


1.can i use my 2wire 1800hg with vista?hooked up to ethernet connection.- yes its possible make sure you enable dhcp on your lan side of you router and under tcp/ip on your pc set it to authomatic assign IP address and dns server address. most router use 192.168.1.1 as thier default address to access it.

to fix your passkey problem.need to access the router and try to change the passkey then save and don't forget to restart the router after you save it,by unplugging it. "make sure your passkey is 8 characters long"


Nov 11, 2008 | 2wire 1800HG Router (RG1800HG00)

1 Answer

Ip camera logon ptoblem


You might have forwarded the wrong ports of the camera to the wrong IP address. Make sure you assign static IP on the camera. Firewalls should be turned off as well.

Oct 26, 2008 | 2wire 1800HG Router (RG1800HG00)

1 Answer

PC unable to detect 2wire HomePortal 1800 HG router


Since your laptop work with the router it only means that the router is OK it can be a problem with your PC, try updating or uninstalling and reinstalling the wireless adapter on your PC.

Jun 06, 2008 | 2wire HomePortal 1800HG Router...

8 Answers

2Wire USB Remote NDIS Ethernet driver


There's only one driver listed at the bottom of the page.

Apr 16, 2008 | 2wire 1800HG Router (RG1800HG00)

1 Answer

Using the 2Wire on Comcast?


Yes I have heard of several customers using the 1800HG with comcast.

Mar 15, 2008 | 2wire 1800HG Router (RG1800HG00)

1 Answer

Cannot connect to internet


Well, the ISP really should be able to help you here, since the equipment is theirs... Did you ad for a technician to come out to service this connection?...

Some of these routers come with a RESET feature, a button on the back of the router.. you might try resetting it back to its defaults.. If it has one, then depress it for up to a minute.. this should reset it configuration...

Let me know if you find it.. and we can go from there..

Dec 17, 2007 | 2wire HomePortal 1800HG Router...

Not finding what you are looking for?
2wire 1800HG Router (RG1800HG00) Logo

359 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2268 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Ron Stone

Level 2 Expert

223 Answers

Are you a 2wire Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...