Question about Standard (CRT) Televisions

1 Answer

Sanyo tv cant get programing features off screen

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: sanyo tv

I have problem with my tv ,there is a streng sound

Posted on Jan 28, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Can get tv to change to av1

The Input button on the original remote is needed to switch to the AV1 or AV2 connections. Unfortunately, I do not believe that the Sanyo DS27930 has an equivalent Input button on the TV. A replacement remote is available here: . Other universal remotes may be able to transmit the Input signal. You will need a remote that was programmed over 6 months after the TV was released with an Input or Source button. Then try all Sanyo codes until you find one that controls all of the features.

I hope this helps.

Cindy Wells

Mar 04, 2013 | Sanyo DS27930 27" TV

2 Answers

Sanyo ds 27510 tv no remote want to setup my tv with an antennea,wont switch from video 2

If it has a MENU button, press it and use the volume up and down to manipulate the choices, press menu again when you get to channel setup. you want AIR if using off air or Cable for cable. Next screen should say start and press menu again, the channels will start to cycle. If htat doesnt do it, you have a new model than the one I just did tonight. OneForall remotes will probably not have the setup button you need to autoprogram. Best bet is to find a Sanyo made universal remote or other Sanyo remote on Ebay as alot of the buttons are proprietary to manufacturer. Some TV's are useless without their own remote if not on a external tuner (cable SAT or digital)

May 13, 2009 | Sanyo DS27510 27" TV

1 Answer

Sanyo tv stuck on video and i dont have a remote for it so i cant watch tv

There are universal remotes for around $5.00 at Wal-Mart. You can program them to your TV very easily.

Jan 21, 2009 | Sanyo DS31590 31" TV

1 Answer

How to turn off display of key features in sanyo tv model avm301u

there's a problem with the tact switch of your tv. to remove that , replace all switch button of your tv.

Oct 09, 2008 | Sanyo AVM-3259S TV

1 Answer

Sanyo remote control hdtv ht30744

You need the original factory remote control. Do a web search for Sanyo. Go to their tech support. They can advise you about how to order a new remote for your set.

Jerry G.

May 04, 2008 | Sanyo HT30744 TV

2 Answers

Zenith h32h38dt 32

The "H" model Zenith TVs are hotel/motel sets designed that
a roomer cannot access the menu feature. Your best bet would
be to purchase a name brand universal remote which has the
menu button feature or order an original Zenith master remote
which would not require programming. Once you have a workable
remote which will allow you to access the on-screen menus you
should be able to program the channels.
Hope this helps,

Feb 27, 2008 | Standard (CRT) Televisions

1 Answer

Sanyo tv ds20930

Does your screen light up or picture comes before it turns off? This could be from your X-ray protection feature, you will have to check the power supply output voltages.

Jan 30, 2008 | Sanyo DS20930 20" TV

1 Answer

Sanyo DS24205 24" TV input problems

I'm sure you know you need the original remote if there is no menu on the front of the set. I suggest doing a search for customer support online for Sanyo products. There you will find contact numbers to see if one is available. Try "Sanyo remotes" on Google or Yahoo etc. Hope this helps

Dec 30, 2007 | Sanyo DS24205 24" TV

1 Answer

Sanyo DS24425 24" TV has great sound and no picture(black screen)

if tv have black screen,increse screen control to see vert ic is defective,and if screen is white with lots of line acrose ,you can find open resister,on pic tube board,or in main board near transformer.

May 20, 2007 | Sanyo DS24425 24" TV

2 Answers

Problem with brand new TV

The reason you're getting a blue screen is that you're not getting a signal. Newer TV's have this "blanking" feature to "kill" the snow in the absence of a signal. Check the connector at the end of the cable where it screws onto the set. Stargazer

Feb 04, 2007 | Sanyo DS24425 24" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66444 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides