Question about Samsung HC-P4752W 47" Rear Projection HDTV-Ready Television

1 Answer

Con Hello, Thanks to Premtech for the good advice. Greatly appreciated. It was suggested to use higher wattage amps. I did this and tv looks great. What im woderning now is if any idvice on adjustments to the convergence grid. I think i might have tweaked some settings before I replaced the amps. I look at the grid and it is not all stright and perpindicular. Mostly the linnes are all matched up and white. But the red is off a little on the very outsides. All colors are moveable. Im wondering if and how Im supposed to get the lines all stright and perpindicular after alighning the colors up? I dont want to mess anything up more by screwing with the grid to much. I dont know if that will burn anything up. The grid looks decent now but .. Looks wavy . Should I adjust or just line up the the red thats off a little bit. I dont know what a correct grid should look like. Thank you very much for your time .. this is a great site!!!!!!!

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Double post.

Posted on Jan 28, 2008


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 4402 Answers

SOURCE: adjusting convergence grid

i correct grid will look all white. all colors aligned up.
you should be able to move the lines with the remote. and you cant burn anything out by doing convergence.

Posted on Jan 28, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

LG 55LM4600-UC LED TV I have was squirted with a squirt gun. Would replacing the t-con board fix this tv? Please read further details.

when water shorts out something it overloads a lot of other components so the best advice is to take it in for a proper diagnosis.
you just replace a board but another board is damaged it might just blow the board you replaced and that would prove nothing

Jan 09, 2017 | LG Televison & Video

1 Answer

Black and white vertical lines on left sided of screen. Black and white vertical lines vary in width. Left of vertical lines is wrapped video from right side. This is happening on all inputs. I have very...

If its under warranty take it back immediately!!! If not you will need to have the set diagnosed to pinpoint the problem. You could be looking at a faulty t-con/panel connection (easy fix) or a bad t-con board(inexpensive) or a LCD panel(very expensive) failure !

Oct 08, 2013 | Samsung UN60C6300 60 in LCD TV

1 Answer

Our Samsung LN52B550 tv has a vertical bar of colored lines on the screen. We have unplugged and disconnected all signal sources. Any other suggestions?

Check the flat ribbon cables that connects with T'Con board to lCD panel for any loose contacts. Re-seat them. If this do not help you, replace the T'Con board.

Aug 19, 2012 | Samsung LN52B550 52 in. LCD TV

1 Answer

My HP LaserJet M1522nf printer will no longer 'boot up'. When turned on the display panel illuminates and then displays "Hewlett-Packard >>>>>" and then all...

Hello, a classic presentation of a failed formatter board, follow my link for a more detailed report and possible repair guidance... If you hurry I suggest HP should repair this under an extended warranty program.


Thanks and good luck Feb 3 11

Nov 10, 2010 | HP LaserJet M1522nf Multifunction Printer...

4 Answers

Blurred TV - double vision with red hue

I was searching online about what could be the problem with our TV and I came across your page. We have a 52" JVC Projection TV that now has a "blurred" screen. We can see the channels but it looks like it's has a shadow around the images. The screen in in a red hue with green blur.

If you have any suggestions on what caused this and what we can do to have this fixed, I would greatly appreciate your advice.

Sep 07, 2008 | JVC AV-56WP74 56" Rear Projection...

2 Answers

T-COn board

I replace it on my TV and it didn't fix the problem. It's not difficult if you have a general knowledge of electronics. Luckily (strangely), lets you return electronic parts that have been installed for credit - restocking fee.

Jun 13, 2008 | Samsung LN-S4692D 46 in. LCD HDTV

1 Answer

Adjusting convergence grid

i correct grid will look all white. all colors aligned up.
you should be able to move the lines with the remote. and you cant burn anything out by doing convergence.

Jan 27, 2008 | Samsung HC-P4752W 47" Rear Projection...

1 Answer

Convergence problem

mostly defective convergence are subject to replace!

Oct 05, 2007 | Mitsubishi WS-55807 TV

1 Answer

After about 2 hours of being on, my tv pic looks like fireworks being displayed on the screen

Can you hear any crackling in the back of the set,? Is your sound affected?

Mar 13, 2007 | Mitsubishi VS-60607 TV

Not finding what you are looking for?
Samsung HC-P4752W 47" Rear Projection HDTV-Ready Television Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75289 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides