Question about Bosch Classixx WVF 2402 Front Load Washer/Dryer

1 Answer

Steam coming out of washer drawer

Becko washer steam coming out of drawer

Posted by on

  • jhgg May 27, 2008

    We have steam coming out of the soap dispenser during drying.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

This problem happened to us too, fortunately it's quite easy to repair. The problem may lie with the water inlet solenoid (rear of machine, top left under the top cover). The cold water inlet to condense the steam may not be working correctly and the steam comes out of the detergent drawer. Replace this solenoid (bank of three on the water inlet) and this should solve your problem.

Posted on Aug 10, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The detergent drawer is jamming and extremely difficult to open,any suggestions please?


Hi I would think its probably built up detergent in the runners take the whole drawer out and give a good clean use a steam cleaner if u have one

Mar 14, 2015 | Asko W6021 Front Load Washer

1 Answer

How do i clean the mold in my soap dispensing on a HE5t steam washer


Open the drawer and there is a tab at the rear, press down on it and the drawer will come completely out where you can take it to a sink and clean it good with some Tilex and a toothbrush. To reinstall it just push it straight in.

Aug 03, 2014 | Kenmore Washing Machines

1 Answer

Dishdrawer stops beeps mid cycle


It could have fogged up because you had the drawer cover off in the first place.

The problem may be the alignment of the mirrors. If the control board has slipped down so that the mirrors do not line up to the photo cell and led---that can cause the problem you are having. Make sure the mirrors (light tubes) are properly lined up with the photo cell and led on the control board. You may have to move the control board to make this alignment. Once aligned secure the board in place and this should solve your problem. NOTE: MAKE SURE THE POWER IS TURNED OFF BEFORE YOU MAKE THIS REPAIR.

Aug 19, 2013 | Fisher and Paykel 24 in. DS-603 Built-in...

1 Answer

The fabric softener is still in the dispenser after a load


when do you put it in also there are suposed to be a number of jets in the drawer dispensor that put water in might be that one of them is blocked and the water is not hitting that side of the drawer hope this helps ivan

Sep 26, 2012 | Samsung WF448AAW 4.5 cu. ft. Front Load...

1 Answer

Hi my becko washing machain is leaking warter from the back dose anyone no why it is


Hi from retired Englishman in SW France,

Sorry but the only way for anyone to find out where the water is leaking from is to remove the back (?) cover and look. It could be from a number of hoses- hot water inlet, cold water inlet, feed to the dispenser drawer hose(s),drainage hose...................
Sorry again but you will need someone to investigate for you ;-0(

Good luck,
John C

Mar 18, 2011 | Washing Machines

1 Answer

Leaking Washing Machine


no you should not need to spend any money on this . it sounds like the hose going from the back of the soap draw to the drum may be blocked just boil your kettle and pour it into the draw if this clears the blockage you wil see steam in the drum then put more hot water about another 2 kettles full down the draw and push the draw in and operate machine on the spin cycle. if the blockage is still there take off the lid you will see the hose from the back of the soap box and sqeeze it this should release the blockage

Nov 11, 2008 | GE WBVH6240F Front Load Washer

1 Answer

MAchine Boils the water


if the temp sensor is operating ok but the element doesnt switch off there may be a problem with the power board/timer just follow the wires back to find problem.

Oct 18, 2007 | Hoover AL130 Front Load Washer

1 Answer

Tumble dryer getting too hot


It sounds like your vent tube is blocked or kinked. Look at the back of your dryer and you will see that tube coming out. Make sure that it is not kinked. If it is, make it not so. You may have to pull out the dryer to make room. If that is not the case, check the following:
  1. Follow the tube to where it goes outside and make sure it is not blocked. Sometimes critters will build a home in the nice warm tube.
  2. Make sure your lint collect in the door is cleaned out.
One of these suggestions should do it.

Good Luck!

Oct 14, 2007 | Bosch Classixx WVF 2402 Front Load...

Not finding what you are looking for?
Bosch Classixx WVF 2402 Front Load Washer/Dryer Logo

765 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

78237 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...