Question about Computers & Internet

1 Answer

System restore problem

Unable to system restore comes up with error 5 glue parts error 1

Posted by on

  • willow60 Jan 28, 2008

    Am very grateful you took the time and will give it a go.Will post after i have had a crack at the problem.Thanks. x

  • willow60 Jan 28, 2008

    Hi

    Many thanx for solution.

    I have no idea how to do the stuff u suggested.I have an old hard drive and i have some discs but am stumped as to how to do it correctly......i can get into my bios and am told i can partition thru there...... could u walk me thru any of it...i am out of my depth and have been quoted the most money in the world for a fix at a shop.I rely on my pc thru illness so would be grateful for any assistence u could give. Many thanx.Kaz x

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 749 Answers

The system restore is blocked by a virus which causes problems to computers and confuses the system restore utility... Even if you have a super anti-virus... sometimes a new virus is the culprit. Or sometimes when you mistakenly allowed or ignored the warning message of your anti-virus.
Copy all your files to another harddrive or to another partition if you have. Or burn them to a CD/DVD
Then reinstall your computer.
Good luck.

Posted on Jan 27, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Connect error Network error code :10014 The system detected an invalid pointer address in attempting to use a pointer argument in a call.


Advanced Computer User Solution (manual restore):
1) Start your computer and log on as an administrator.
2) Click the Start button then select All Programs, Accessories, System Tools, and then click System Restore.
3) In the new window, select "Restore my computer to an earlier time" option and then click Next.
4) Select the most recent system restore point from the "On this list, click a restore point" list, and then click Next.
5) Click Next on the confirmation window.
6) Restarts the computer when the restoration is finished.
Novice Computer User Solution (completely automated):
1) Download (Error 10014) repair utility.
2) Install program and click Scan button.
3) Click the Fix Errors button when scan is completed.
4) Restart your computer

Aug 16, 2018 | The Computers & Internet

1 Answer

How do I repair Celluloid dolls?


This repair guide will teach you how to restore a shattered celluloid doll. I will be taking you step by step through the process of restoring a Madame Hendren Baby Brite doll head.
What you need to get started:
1. Loctite Brand Epoxy Putty
2. Probond Brand polyurethane glue
3. cloth cut in 1"x 3" strips
4. Paper plate (Must be paper)
5. Loctite brand super glue
6. One package x-fine sandpaper
7. Paint (I use Createx brand in my airbrush)

Mar 17, 2017 | Toys

1 Answer

Total loss of D drive on 5600U, no recovery disk


Which operating system ?
Restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer.

Use the system restore to restore your system to an earlier time click start all programs accessories system tools you should see your system restore option if it is a hardware issue the system restore might not work Manual restore points that you specify with the System.

Configuration utility Installation restore points that occur before you install a program or a serviceyou can use the system checkpoints or the installation restore points to restore your computer's settings to a date when it operated correctly.This may also help determine the cause of the configuration error.

To perform a system restore, follow these steps:
1.Click Start, click Run, type msconfig, and then click OK.

2.On the General tab, click Launch System Restore.

3.Select Restore my computer to an earlier time, and then click Next.

4.Calendar dates in bold are possible restore points.
Click the most recent one to view system restore information.

5.Select a system checkpoint or an installation restore point, and then click Next.

6.Close all other programs.

7.To start the system restore, click Next.

8.Your computer restarts.
Repeat steps 1 through 8 until you fix your configuration issue.

Feb 26, 2014 | Acer Aspire 5600U all-in-one desktop

1 Answer

My system was corrupted i am unable to use the previous key word at the time of purchase before so please help me with the given email id ismail2945@gmail.com contact no 9845134626


Either use the system restore option or contact the seller and ask them for help or refund.
Restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer.
Use the system restore to restore your system to an earlier time click start all programs accessories system tools you should see your system restore option if it is a hardware issue the system restore might not work Manual restore points that you specify with the System.
Configuration utility Installation restore points that occur before you install a program or a service you can use the system checkpoints or the installation restore points to restore your computer's settings to a date when it operated correctly. This may also help determine the cause of the configuration error.

To perform a system restore, follow these steps:

1.Click Start, click Run, type msconfig, and then click OK.
2.On the General tab, click Launch System Restore.
3.Select Restore my computer to an earlier time, and then click Next.
4.Calendar dates in bold are possible restore points. Click the most recent one to view system restore information.
5.Select a system checkpoint or an installation restore point, and then click Next.
6.Close all other programs.
7.To start the system restore, click Next.
8.Your computer restarts.
Repeat steps 1 through 8 until you fix your configuration issue.

Oct 01, 2013 | Computers & Internet

1 Answer

While taking recovery,1st disk remain incomplete and show an error to restart.my laptop is just 1 month old,i am unable to detect the problem,please furnish me with a successful solutions,i am too wor


Restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer You could select the option start at last known configuration that worked this will tell you if and what file has been corrupted or missing then you will know if its a hardware issue You might use the system restore to restore your system to an earlier time click start all programs If it is a hardware issue the system restore might not work Restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer. Use the system restore to restore your system to an earlier time click start all programs accessories system tools you should see your system restore option if it is a hardware issue the system restore might not work Manual restore points that you specify with the System. Configuration utility Installation restore points that occur before you install a program or a service you can use the system checkpoints or the installation restore points to restore your computer's settings to a date when it operated correctly. This may also help determine the cause of the configuration error.

To perform a system restore, follow these steps:
1.Click Start, click Run, type msconfig, and then click OK. 2.On the General tab, click Launch System Restore. 3.Select Restore my computer to an earlier time, and then click Next. 4.Calendar dates in bold are possible restore points. Click the most recent one to view system restore information. 5.Select a system checkpoint or an installation restore point, and then click Next. 6.Close all other programs. 7.To start the system restore, click Next. 8.Your computer restarts. Repeat steps 1 through 8 until you fix your configuration issue.

Feb 26, 2013 | Sony VAIO Computers & Internet

1 Answer

Five beep in Hp compaq 530


1 short beep and 1 long beep Memory problem 2 short beeps and 1 long beep (repeats 5 times) Unable to initialize video or video card required but not installed 3 short beeps and 1 long beep CPU configuration error or CPU type is not compatible The following beep codes are common to many HP and Compaq desktop computers that can occur while restoring, flashing or updating the BIOS : Beeps Description 1 short beep Legacy floppy drive or CD/DVD drive not detected 2 short beeps Floppy diskette or compact disc not detected 3 short beeps Unable to start flashing (such as when missing a utility or BIOS image) 4 short beeps Flashing failed (checksum error, corrupted image, etc.) 5 short beeps BIOS recovery successful

Apr 21, 2011 | HP Compaq Business d530 Ultra-Slim PC...

1 Answer

Error Oxc00000e9 when i turn on aspire 5741, no external devices plugged in.


try this below


First please refer to the following thread to see whether it helps.

http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=796452&SiteID=17


I know that you are unable to start the current vista operation system and getting the error 0xc00000e9; the issue can be caused by the damaged system files or hardware device. You might first follow the steps below to exclude the possibility of system corruption.


Method 1: Use the Windows Recovery Environment (WinRE) to run System Restore

======================================================

1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.

2. Press a key when the message indicating "Press any key to boot from CD or DVD ...". appears.

3. Select a language, a time and currency, and a keyboard or input method, and then click Next.

4. Click Repair your computer.

5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next

6. At the System Recovery Options Dialog Box, click on System Restore.

7. Follow the System Restore Wizard instruction as usual and choose the appropriate restore point.

8. Click Finish to restore the system.


Method 2: Startup Repair from the Windows Recovery Environment (WinRE)

======================================================

1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.

2. Press a key when the message indicating "Press any key to boot from CD or DVD ...". appears.

3. Select a language, a time and currency, and a keyboard or input method, and then click Next.

4. Click Repair your computer.

5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.

6. At the System Recovery Options Dialog Box, click on Repair your computer.

7. (Click the operating system that you want to repair), and then click Next.

8. In the System Recovery Options dialog box, click Startup Repair.


Good luck!

Feb 14, 2011 | Acer Aspire 5050-3371 Notebook

2 Answers

Cd wont eject or play in a 6disck stock cd player


had the same problem with my cd player...just disconected the battery for 5 mins and put it back on the cd player ejected all the cds and plays them again.no cd error

Oct 13, 2009 | 2005 Lincoln Aviator

1 Answer

Blue screen when I close the top of my laptop or shut it off


this error relates to video drivers. to fix this. restart your computer and as soon as you see dell keep tapping the F8 key in the top row to get advanced boot options. and then select "Enable VGA Mode" and press enter 2 times. then the computer should start and then do a system restore. to do system restore.
There are two ways to perform a System Restore in Microsoft Windows. The choice only depends on if the computer is currently able to boot into Windows or not. If the computer is able to get to the desktop (with the clickable start
in the lower left corner), then choose Method 1. If the system is unable to boot to the desktop or otherwise is unable to complete a system restoration using the selection above, then choose Method 2.
Method 1 Able to Access the Desktop.

1 start .
then click Help and Support
2 Under Pick a Task
, click Undo changes to your computer with System Restore
3 Select Restore my computer to an earlier time
, then click Next >
4 Under, 1. On this calendar, click a bold date, select a date before problems were observed with the computer.
Dates in bold indicate a restore point is available for that date.
5 Under, 2. On this list, click a restore point, click to choose a restore time from the list.
6 Click Next >
.
7 Verify that the desired restore point is listed, then click Next >
.
8 After the computer restarts, the Restoration Complete page of the System Restore window appears. Click OK
.
If the problem still occurs, try restoring the computer to an earlier restore point.

Method 2 Unable to Access the Desktop.

1 Turn off the computer.
2 Turn on the computer and press the F8 key every other second until the Windows Advanced Options window appears.
3 Press the <Down Arrow> key on the keyboard and select Safe Mode with Command Prompt.
4 Press the <Enter> key on the keyboard.
5 Log in as the administrator or as a user with administrator rights.
6 At the command prompt (blinking cursor), type:
C:\Windows\system32\restore\rstrui.exe
and then press the <Enter> key.
If Windows XP has been reinstalled to a different location on this computer, change C:\Windows to the new path.
If this doesnot work...then we need to reset the computer back to factory settings.
Notice:
Restoring the original factory image erases ALL existing data. This includes files, folders, programs, drivers, E-mails, photos. Before performing a PC Restore, back up all personal files. If you do not back up your personal files, the data will be lost.

1 Turn on the computer.
2 When the Dell splash screen appears during the computer startup process, press and hold <Ctrl> and then press <F11>. Then, release both keys at the same time.
NOTE: Some systems like Inspiron Mini 9 (910) do not support System Restore as they do not have <F11> nor any substitute.
3 In the Dell PC Restore by Symantec window, click Restore. Alternatively, press <Tab> to highlight Restore, and then press <Enter>.
4 When a warning message appears stating that all data will be lost, click Confirm, or press <Tab> to highlight Confirm and then press <Enter>.
The Progress window will appear. Once the restore process starts, Dell PC Restore by Symantec usually takes about 8 to 10 minutes to finish.
When the restore process is complete, the following message will appear:
The system recovery process was successful.
5 Click Finish or press <Tab> to highlight Finish and then press <Enter> to restart the computer.
The software is now installed as it was when the computer was first received.

Oct 13, 2009 | Dell Inspiron 6400 Notebook

1 Answer

Internet explorer being constantly shut down and being knocked off line ,also I am unable to go to system restore successfully.


Hello

The system restore component in windows is mostly flawed and causes more problems than it fixes.

If you must restore to the point of purchase use the windows installation disk or system restore disk that came with your pc.

May 10, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...