Iiyama prolite e483s. no sound

try this site.

http://www.iiyama-monitors.co.uk/categories/monitors/iiyama-23-and-24-inch-Monitor.aspx

http://reviews.cnet.com/lcd-monitors/iiyama-prolite-e385-w/4507-3174_7-30845493.html
scroll down the page.

From time to time, I've the same white screen problem with my IIYAMA E1902WSV.

I can resolve that issue with a reset to factory settings.
1- Turn ON power (blue led)
2- Push on the MENU button and keep the button pushed while
pulling out the power cord.
3- Plug the power cord back while keeping the MENU button
pushed.

You should see the picture again.

This PDF file provides the Diagnostic info for the E435
lease click on this link to download this PDF file :-
http://www.koyoele.co.jp/english/support/pdf/DL205_M1.pdf

Dim or dark display can be caused by a faulty inverter board or faulty CCFL lamp. The inverter supplies high voltage to the CCFL lamp, the CCFL lamp is a miniture fluro tube and these dim with age.
Check out LCD Parts for service, parts and DIY info - click on this link to their WEB site. :-
www.lcdparts.net

i changed monitors

Check that the power cord is fully plugged in first.

It is probably the inverter board inside the monitor.
(if the screen does properly display ever then it is not the screen)
It CAN be fixed but I do not suggest anyone open up a monitor (LCD or CRT) who is not "technically inclined."

If you really want to fix this particular one then take it to a local tech and get an estimate first. If it's almost as much as a new monitor then buy a new one.

I found this on another site:
[QUOTE=numbnutjas]I had the same problem along with lots of others who bought this great prolite monitor.

Whenever you turn the power off for more than five seconds the monitor looses an important bit of info of a hidden menu. Iilyama are not keen on publicizing the fact their monitor has a bug!

Follow these steps very carefully, it might not work the first time but it does work I promise.

Make sure that the moniter power button is off.

Unplug monitor from mains ( the auto exit button should flash red after about five seconds and you hear a popping sound.)

plug monitor back in mains.

hold down + and - on the monitor

now hold down power button on monitor

let go of power when power button when the green led lights up

let go of + and - buttons

wait a few seconds and press menu, a hidden menu will appear in the top right

use the + and - buttons to move the hilighted option over the auto colour option in the menu
push the menu button.


It does work, but if you have any problems: email at : miamoo2038 at hotmail dot co dot uk

Dear ally_vzz

You can first chk the operation of speakers by even connecting it to a mp3 player or tape to chk weather the speakers are functioning then u can always reinstall the drivers to make it work.

double check that the speaker wire (green) is connected in the back of the monitor and into the back of your pc into the green connection, if it is and there is no sound you can always use a seperate pair of speakers, as it will be cheaper than repairing the monitor.