Question about Intel D102GGC2 Motherboard

1 Answer

Hard disk detection

My Hard disk does not get detected sometimes and sometimes my hard drive order gets changed by itself. My system doesn't boot if i use a new IDE cable. PLease help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Hard disk detection - Intel D102GGC2 Motherboard Motherboards

Try to reformat your hard drive

Posted on Jan 27, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How can I a boot disk system failure on my Asus without a system disc?

First - re-seat the hard disk and reboot the computer. If the computer does not boot up then reboot and go into the BIOS configuration to see if the BIOS detects the hard drive. If it doesn't detect the hard drive then it could be faulty.
Then the hard drive needs to be replaced in the computer/laptop, Windows installed and the computer or laptop's device drivers plus your programs etc. to get a functioning computer/laptop again.

Nov 30, 2012 | Motherboards

5 Answers

Booting up new motherboard

You need to re enter system setup Press Del and change boot device order to floppy, CD/DVD and Hard Disk


Jul 05, 2008 | ASUS P5PE-VM Motherboard

2 Answers

Bootable device has not been dectected

When the PC cannot see a boot file/disk on either thehard disk or floppy drive it gives an error message "No bootable device. Insert boot disk and press anykey" First thing, check to see if the is a floppy disk inthe floppy drive, if so removes this disk. If there was no disk in the floppy drive then it maybe a hard disk problem.
Check the BIOS to see if the hard disk is detected, if not open the case andre-seat the data cable on the hard drive and also where it connects to themotherboard disk controller.
If it still gives this error message and the BIOS does not detect this harddrive, then the hard drive is probably faulty.
A further check on the hard drive, remove the hard drive and connect it to anUSB hard drive adapter and connect it to a working computer's USB port, if thiscomputer does not detect it as an external storage device then the hard driveis faulty.
To get the computer operating again, install a new hard drive in your computerand then install Windows on this hard drive plus the computer's devicedrivers and your programs.

Aug 24, 2011 | Intel D946GZIS Motherboard

1 Answer

MY BIOS IS NOT DETECTING SATA hard disk, i system is not detecting SATA hard disk

When the system is booting go into the bios settings. The option for sata drive detection may need to be turned on there, once verifying that option is on save & reboot the pc and it should detect the sata drive.

Mar 14, 2011 | ASUS K8V-MX Motherboard

1 Answer

Hi, when I power up my laptop, it get a message saying boot from a bootable device, if I click on any function key when the logo appers the system will boot into windows

It appears your hard disk has failed. Go to the BIOS configuration and check if the BIOS detects the hard disk, if not then re-seat the hard drive and then check the BIOS again.
If the BIOS still cannot detect the hard disk then it is faulty.
To get your computer working again, replace the hard disk, install Windows on the new hard disk plus the motherboard's device drivers and your programs.

Jan 24, 2011 | ASUS A7V8X-MX (90-M7A780-G0EAY)...

2 Answers

When my laptop boots up it says operating system not found

Not good. Check your bios for correct drive for boot up, but it sounds like yoru hard drive is not being read....

Oct 26, 2010 | Acer (ACERMOTHERBOARD)

1 Answer

DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER... i have a mother board K7S741MG-6L, bios version 426wp225, i have this problem BIOS CHECKSUM ERROR , KEYBOARD ERROR or NO KEYBOARD PRESENT (which is...

your hard disk is disconnecetedor loose . pls check the hard disk power cable & IDE or SATA cable. Then check BIOS hard disk detected or not if hard disk is not detected your hard disk is faulty.

Dec 11, 2009 | Foxconn WinFast K7S741MG Motherboard for...

3 Answers

When I connect my SATA dvd drive my comp continuously restarts. Without it, it runs fine.

hello ! 

Thats wired is it so  ? ok  go to your computer  set up and  see what's the booting order .

If it starts with cd  rom first  reset to boot from hard disk first  ie its should be in this order 

1, hard disk
2, cd rom
3 floppy disk 

good luck 

Sep 17, 2009 | Motherboards

1 Answer

My second hard drive (slave) sometimes works and

try to find out if all cables are properly attached, that in bios both IDE channels are set active and ide(hard/drive detection) is set to auto.
Exit saving changes. reboot and wait if in boot-up screen hdd is shown. Now you have made sure the hdd is being recognized from the hardware side.

Boot up windows and check if it is listed in the explorer.
IF yes, youre lucky.
if not, run hardware detecton and wait for results.
IS it now?
if yes goto properties, tools and check disk thoroughly.
back-up data, format it(long version!). check again.
(Now any invalid or broken clusters are marked)
Hope this solved the issue!

Aug 04, 2009 | Gateway Motherboards

1 Answer

Hard disk not detected

hi im josh in cebu phils.may i help you? if it happens when the hard drive not detected and sometimes detected. your main problem is the IDE or the SATA cable.try to change it because it is faulty. and be sure to mount it properly when you change the new one. thats all good luck friend hope i helped you.

Feb 27, 2009 | Motherboards

Not finding what you are looking for?
Intel D102GGC2 Motherboard Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

2598 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you an Intel Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides