Hi I have recently upgraded my router to the Telkom ADSL Premuim Combo and need to allow port sharing to ports 3724, 6112 and the range 6881-6999. I have been able to configure my Norton software but can't figure out how to configure the router. Hope you can help. Thanx Rod.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
As the application requires certain ports to be opened on the router,try to follow the steps below to configure the router. Since you are connecting behind the router, you are going behind a NAT firewall.Therefore, you would need to allow ports for the remote access application to go through the firewall. You would need to know what port number application uses. You can check with the program manufacturer for the information, or see the Help menu.
For routers with old firmware versions (without the Cisco web interface):
1.Open Internet Explorer. 2.After "Internet Explorer" opens, please typehttp://192.168.1.1 into the "Address Bar" and click GO. 3.The "Enter Network Password" window will appear. Skip username and type admin (admin is the default password) as the password,and click OK. 4.You will need to click on the Advanced tab to the very right. Once the "Filters" area appears, please click on the Forwarding tab. 5.Once the "Forwarding" area appears, click the Port Triggering button. Once you've done this, a new window will appear.Enter the ports needed to be opened > Click Apply
For later firmware (that has the Cisco web interface)
1.Open Internet Explorer. 2.After "Internet Explorer" opens, please typehttp://192.168.1.1 into the "Address Bar" and click GO. 3.The "Enter Network Password" window will appear. Skip username and type admin (admin is the default password) as the password,and click OK. 4.Click on "Applications and Gaming" then click on the "Port Triggering" Sub tab. Enter the ports needed to be opened >Click Save Settings.
Customized Trigger Port Range Incoming Port Range Application From ~ To From ~To WARCRAFT 6112-6112 6112-6112 WARCRAFT 6113-6119 6113-6119
Hope this help everyone that has problem with the game.
You probably need to change port settings to allow it. Typically you have to enter exceptions. Do you have a wireless router connected? Have you gone on World of War craft support site to see what ports need to be opened to play the game?
Then you can go to http://www.arrisi.com for info on adding port exceptions.
lets resolve your concern what i understand is that you are able to go online with all your computers and able to share the data as well, I suggest you to open the port number : 6112 which i find for you as mentioned on the websites on your router and then you will able to join the game on all the 6 computers, and make sure you open the port in TCP/IP mode.
I think Not.
There are ADSL wireless routers however.
I guess your purpose is to make your ADSL modem available wirelessly, you can connect the
modem via lan line to the wireless and use that as a router.
http://www.portforward.com/english/routers/port_forwarding/Siemens/Speedstream-5450/World_of_Warcraft.htm should be close enough to get you started (they don't have pictures for the 4200). Check the link for the downloader too - you'll need those ports forwarded if you want to download upgrades. (And you probably can't get both the desktop and the laptop playing at the same time - a port can only be forwarded to one computer at a time.)
World of Warcraft communicates on port 3724 with the TCP protocol. The patching process requires port 3724, 6112, and 6881-6999. Once again to download the patches for World of Warcraft you should forward the following ports.
3724 TCP6112 TCP6881-6999 TCP
If you can not forward ranges of ports and are only planning on having one computer playing WoW, just forward ports 3724 TCP and 6112 TCP. The 6881-6999 port range is mainly used where multiple computers on a network may be trying to play WoW at the same time.
Ventrilo: From their web site: Click on the "Port number" input box and enter the servers port number. The program will automatically display the default port number of 3784 but you can change this to what ever the server needs it to be.
So forward 3784 or the port number you chose.
http://portforward.com/english/routers/port_forwarding/Motorola/SBG900/SBG900index.htm for a walk through on how to do the forwarding.