Question about Shop Vac 201-13 Wet/Dry Vacuum

1 Answer

The central system is lose

How to fix the central system in place?

Posted by on

  • speedturtle Jan 28, 2008

    The fan that connects the system within the central area (main area) is lose, tried to tighten it in place unfortunately once it is plugged in it starts to make strange noises...which tells me the fan is out of place and unable to move properly!



    hope this helps!



    if this fails as an explanation will have to add a video...but i hope u understand the problem i am facing.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 126 Answers

I'm sorry, but this information is insufficient to address. A more detailed description of the "central system" is requested.
Thanks.

Posted on Jan 27, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove and replace the inverted bag filter?


Inverted filter bags can be tough to remove. The best way is to grab the bag closest to the top portion where it attaches to the canister. The bag is locked in place by a metal rings that presses out. You want to grab a portion of the bag (some bags have a holder tab) and pull towards the center. The goal is to make a C shape of the ring that is holding the bag in place. Once the bag collapse into a C shape, the bag can be removed and cleaned or replaced. The same technique is best for re-installing the new or cleaned bag.
Check out our website if you need replacement parts or you have more questions.
NuTone Central Vacuum Systems and Replacement Parts
Don't forget to visit and like our Facebook page https://www.facebook.com/QualityHomeSystems

Nov 05, 2015 | Broan-NuTone CV570 Central Bagless Central...

1 Answer

Nutone cv750 problem


I doubt that's an electrical breaker - because it wouldn't take 10 minutes to flip, it would happen almost immediately. It must be the heat breaker. There are two reasons your vacuum system could be overheating and tripping that breaker. Either you need to replace the filter - if it's partially clogged then the motor may have to work too hard to get suction and cause it to overheat. I'd suggest checking the filter first, because that's the easy fix. If it's not the filter, then your motor is going out. You'll want to replace that. Check the filter, and let me know. I'll see if I can find a place to order a new motor for it.

Sep 01, 2007 | Broan-NuTone CV570 Central Bagless Central...

2 Answers

I have a Beam Rugmaster Plus power head Model BM1 393 Type AB and the connection were the metal pipe meets the plastic swivel broke close to the unit. It appears like a manufacture defect in that is broke...


This is most likely repairable. Lots of the Beam parts are available. I would recommend checking out any local vacuum shop or searching online for a central vacuum store that sells beam products.

Sep 29, 2009 | Beam Industries 750 Classic Bagless...

1 Answer

My nutone vacuum system won't shut off when I pull the hose out of the wall...any thoughts


The relay that turns the machine off from any of the several places where you connect, is probably stuck.

The relay is operated by low voltage. When you connect your hose, you comlete the low voltage circuit and energize the 110 volt system, and the machine comes on. When you pull the hose out, the relay is suppose to release.

those are my thoughts

I hope this is of value to you.

a

Sep 27, 2009 | Broan-NuTone CV450 Central Bagged Central...

1 Answer

Central Vac will not turn on.


These problems are nearly exclusively caused by a bad circut board and replacing it is the fix. Bad boards can cause many different effects so its nearly impossible to be sure. The 9v signal wire is not enough to short out an entire unit so it is unlikely the hose. If it is a direct connect system and you are pulling power from the 110 somehow that would cause main unit problems but that is unlikely at best. Sounds like a failed board to me.

Best of Luck

Jun 04, 2009 | Easy Flo EF1400 Central System Vacuum

1 Answer

Eureka central vac 's power stopped won't start again.


I took to dealer I bought from . He examined it. The motor is gone needs new one. Thanks, Ann

Jan 24, 2009 | Eureka 1810 Central System Vacuum

1 Answer

Can the damaged hose 8 inces from handle be cut then replace hose


If the hose is non-wired then you can fix this yourself. When you Plug the cuff into your wall inlet does the vacuum turn on automatically? If so then you should be able to trim the hose with no ill effects other than losing eight inches of cleaning area.

If the hose has a switch on it's handle that turns the vacuum on and off, you will probably need a technician to fix the hose. Some wired hoses even have High Voltage lines in them and should never be taken apart.

Jan 11, 2009 | Electrolux Central Vacuum

2 Answers

Broken Nutone central vacuum unit


most of those systems are plumbed with PVC, but some do use flex throughout the home...
If yours is PVC, visit your nutone dealer and get a new outlet/elbow.
Trim the old elbow off with a drywall saw or other small saw (if you have a sawsall, that is fine) and glue the new one in
if it is flex tubing, it's easier; the elbow threads on. just be sure to hold the tubing so it doesn't drop down,

Jan 02, 2009 | Broan-NuTone CV353 Central Vacuum

2 Answers

Central Vac does not shut off


Sounds like the relay that is in the central vac unit is stuck to the ON position. When you plug it back in..does it start right up ? If so.. You should be able to disconnect all the receptacle feeds to the central vac unit at the central vac unit to determine which one ( if any) is calling for the vac to stay on.. if none are.. then it is internal to the vac and may be a stuck relay... Hope that gives you some ideas to check...

Aug 28, 2008 | Vacuums

2 Answers

My Kenmore Central Vac loses suction


Do you have the same problem in all of your outlets? If you do, then there is a problem with the hose end. If it is only at one outlet, then that outlet has a problem.

Mar 13, 2008 | Vacuums

Not finding what you are looking for?
Shop Vac 201-13 Wet/Dry Vacuum Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Shop Vac Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Mike

Level 3 Expert

4348 Answers

Jim Parker
Jim Parker

Level 3 Expert

1041 Answers

Are you a Shop Vac Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...