Use the freeware Belarc Explorer to find out what CD-DVD burning program you have, like NTI, Roxio, or others, then open it, and their help programs MAY be clear enough to tell you what to do. They are written by Chinese for Koreans or Japanese, and translated into English. You don't need a manual for your hardware. It may not even be detected without a non-microsoft burning program.
Comments:
Feb 23, 2008
- Actually, it is "Belarc Advisor". Just google it to download.
locked region settings on LG DVD-RAM- all changes used by someone who borrowed my PC! Currently set...
(More)
locked region settings on LG DVD-RAM- all changes used by someone who borrowed my PC! Currently set to region one and would like it set to ALL or Region 4 if possible.
I have also the same problem and after firmware upgrade i found that my drive does not detected by...
(More)
I have also the same problem and after firmware upgrade i found that my drive does not detected by my pc's bios setup. is there any solution for backup the process or repair the drive.I edited the registry,but still both drives wount show up in BIOS like they're vanished.The system restore didn't solved the problem I get the message ''primary(master) IDE drive not installed,secondary(slave) IDE drive not installed,press F4 to abort'' then it finds floppy and HDD and after that boot into windows.I have 3 CD ROM drives but only two are connected CD ROM AND CD-RW drive.Thanks for any help.