Question about Pioneer VSX-D906S Receiver

4 Answers

PIONEER RECEIVER VSX9700S REMOTE ISSUE

MY RECEIVER NO LONGER RESPONDS TO MY REMOTE?/ THE REMOTE STILL WORKS
THE OTHER COMPONENTS OK AND THE RECEIVER STILL WORKS FINE MANUALLY BUT NOT BY THE REMOTE. ANY SUGGESTIONS?
REGARDS,
BUD

Posted by on

  • BUDDYBOB493 Jan 27, 2008

    thanks for your efforts, but as I indicated, the remote works everything else ie; cd;cass;tv;vcr;vdp... only the receiver doesn't respond. It is a matched pioneer component system.
    bud

  • BUDDYBOB493 Feb 10, 2008

    tried the "plugin reset" doesn't fix. Retested the remote features on the independent pioneer cass & cd units and they respond fine. The recvr does not recognize the remote signal.??

×

Ad

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,944 Answers

Hi,

Did you try cleaning the part of the receiver where it is supposed to detect the signal from the remote? Maybe there is something there obstructing the signal (perhaps a layer of dust).

Posted on Feb 10, 2008

  • Damen Wong
    Damen Wong Feb 10, 2008

    Did you try moving closer to the receiver? If getting closer and cleaning doesn't help then it's like drummernick said, the infrared sensor in your unit has malfunctioned.

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,422 Answers

Hi,

The first thing is to try tapping the top of the receiver.This trick usually works most of the time..
The other thing you can do to try to resolve this issue is to
reset the receiver by unplugging it, holding down the power button and while holding down the power button, plugging the receiver's power cord back in. If after performing the reset procedure the problem still persists, we strongly advise you to have both the remote control and the receiver evaluated by an Authorized Pioneer Service Center to determine which one of the two is malfunctioning.

Goodluck,
Please don't forget to rate me as fixya..

Posted on Feb 04, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that has over 500 points.

  • Master
  • 440 Answers

Infrad controller on sterio died i looked online for yours dont see replacement try calling them ddirect for front pana part but ther touchy to reach dont wann sell u parts like that thx nick

Posted on Feb 04, 2008

  • nick helpap
    nick helpap Feb 04, 2008

    also just cuse remote blinks doesnt meen its working ok

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 871 Answers

Check your remote. try fresh batteries as well. if it still wont work, try opening your remote and clean it with a soft bristle brush or the like. try testing it again.

Posted on Jan 27, 2008

  • earl norman llanera
    earl norman llanera Jan 27, 2008

    if that wont work either, maybe its time for your remote to be replaced. hope this helps.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What to do if PIONEER DVR-940HX is not responding at remote control comands


Have you tried a cheap universal remote just to verify the receiver is working for the infrared remote signal?

Jun 21, 2016 | Pioneer Televison & Video

1 Answer

Pioneer vsx-32 won't turn on with remote


Hi, since both remotes suddenly fail, I am assuming the problem is more than likely with the received rather than the remotes.

If you do wish to check your remotes, then point your mobile phone camera at the remote's Infrared lens and press one the remote's buttons. Your mobile phone camera is able to detect Infrared light and in case you remotes are working properly, you should see light coming out of your remote's Infrared lens.

Make sure that no direct sun light is on your receiver because that can effectively block out the signals from your remote controls.

Try the following method to reset your receiver. Unplug your receiver mains cable from the mains wall socket; power your receiver on by pushing the on/off button (nothing will happen obviously) and leave it like that for say 30 minutes. By that time all capacitors in your receiver will have discharged. Plug your received mains cable in the mains wall socket.Push the receiver's on/off button and see if it know responds to your remote controls.

If the problem still persists, you may have a failed Infrared receiver LED. That component can be found inside your receiver. It will take some basic elelectronics skills to get this component replaced. A service manual can help you. You can download it for free from this website: http://elektrotanya.com/pioneer_vsx-32_33.pdf/download.html

Good luck.

Jan 20, 2013 | Pioneer Elite VSX-32

1 Answer

Good day, I need your asst. I can't seem to remove the 2ch playback from my VSX-49TX Elite Pioneer reciever, I tried reseting it and nothing happen...can you help me.


If you have no sound, you can try the multi channel inputs on the back after switching to the multi chan input. If you have sound that way, you have a DSP problem. I can repair this issue to the component level, as many customers have found, the boards are very expensive, and no longer available. If you're interested in repairing your receiver, please visit my website at audioserviceclinic.com. There you will find the seminar I wrote for Pioneer, when I worked there as a Field Service Engineer, specializing in audio. You can contact me directly from my website. Thanks you.

Jul 14, 2011 | Pioneer VSX-49TXi Receiver

1 Answer

I have a DISH Network ViP722 DTV Receiver / 350-Hours Video.... Whenever I have my brightness setting below 40 on my LG TV, my Dish DVR will no longer respond to its Dish issued remote control. If I turn...


Hello! Daniel Busa with Dish Network. That would be a case of remote interference. You'll need a model 6.3 or 6.4 remote. You can set it to a uhf frequency instead of an ir that will correct the issue.

Aug 26, 2010 | DISH Network ViP722 DTV Receiver /...

1 Answer

How do you charge the pioneer xm portable radio in the car


I use my car dock, with a dc cable.

If anyone can help me with why my radio is not responding to the remote, please let me know. The battery in the remote is good, and I've tried a new remote, but the radio just won't respond to the remotes.

Mar 03, 2010 | Pioneer inno2 Portable XM Satellite Radio...

1 Answer

Pioneer remote for receiver


It's quite likely the codes are the same. Check the manuals for the models on Pioneer's website (www.pioneerelectronics.com) for the year/date they were issued. For most models issued around the same time the codes were the same, but they also post IR codes, so you can verify there as well. If you can't find any information I will give you info on ordering the exact remote you need and options for universal remotes that have your model.

Regards,
Vincent J. Bova
Total Control Remotes
Programming Remotes & Advanced Control systems
www.totalcontrolremotes.com

Dec 11, 2008 | Pioneer Televison & Video

1 Answer

I Have a Pioneer VSX9700S tuner amp, I short circuted the right side front speaker and now only the rear and center speakers work, Help!


This answer is generic:

The output stage most likely has damaged IC's and transistors depending on the exact design. This may also include the pre-drivers since most of these designs are 'DC coupled through the signal path.

An experienced audio service tech should be able to service this for you. Problems with blown output stages may tend to be expensive to service.

Jerry G.

Jul 16, 2008 | Pioneer Audio Players & Recorders

1 Answer

Re: Remote Control Brand: Pioneer Model: XXD3086 I'm trying to set-up my remote control to my TV and I can't because I lost the instruction book. Please help me with the...


Pioneer remote XXD3086:

1. While pressing the Receiver button, press and hold the 1 button. LCD shows SETUP.

2. Press the Milti Control button for the component you want to control. LCD displys the component (for example, TV/Sat).

3. Use left and right cursor buttons until the LCD displays Preset. Press Enter to select Preset.

4. Use up and down cursor buttons to select the first letter of the brand name of your component. Press Enter. For example, select P for Pioneer.

5. Use up and down cursor buttons to select the manufacturer's name from the list. Press Enter.

6. Use up and down cursor buttons to select the proper code from the list. DONT press Enter yet.

7. Try out the remote control. For example, switch the component on or off by pressing Source. If it doesn't seem to work, select the next code in the list (if there is one).

8. Press Enter to confirm. LCD displays Ok.

VSX-915 model only:
Instead of selecting Preset above, select Learn. Point the two remotes at each other, press the button that will be doing the learning, press the corresponding button on the other remote that is teaching. Press the Receiver button to exit.

Apr 27, 2008 | Pioneer DVR-107D DVD±RW Burner

Not finding what you are looking for?
Pioneer VSX-D906S Receiver Logo

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5554 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Ian Summerfield
Ian Summerfield

Level 3 Expert

502 Answers

Are you a Pioneer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...