Question about Kenmore 44102 Front Load Washer
Our washer is spinning very slowly on its final spin cycle, although the fast spin cycle is selected. The result is that clothes are soaking wet when the cycle is complete.
Out balance are water still in tub will do that try cleaning out the pump filter under the panel at the bottom of the washer some have a big white looking screw you turnit remove filter if there water in it it will flow to the floor so have something to catch it with
Posted on Feb 28, 2008
Tips for a great answer:
Nov 05, 2015 | Kenmore Washing Machines
Hey friend, thanks for your post!
I see that your Frigidaire washer will not spin on the final cycle. You could be having an issue with your motor or control panel. It is possible that the control panel is not sending the required information to your motor in order to process the spin cycle. Or it could be that the motor is not receiving the signal from your control panel to spin.
I would recommend performing a reset on your appliance which you can do by unplugging the power cord or flipping the circuit breaker for ten minutes. I hope this information is helpful. -Matt
Oct 08, 2014 | Frigidaire Washing Machines
Hey friend, thank you for your post!
I see that your Frigidaire washer, FWT449GFS2 is not entering the final high spin cycle. It is possible that you could have a defective motor or timer. Since it could be any one of these underlying issues I would recommend you having a professional come out to the home for the repair of your washer. -Matt
Aug 14, 2014 | Frigidaire Washing Machines
Jan 07, 2009 | Bosch Nexxt Premium WFMC6400UC Front Load...
Jan 07, 2009 | LG WM-1832C Front Load Washer
Oct 23, 2008 | Kenmore 22422 Top Load Washer
Mar 05, 2008 | Washing Machines
Feb 24, 2008 | Washing Machines
592 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: