Question about TruTech TT320

1 Answer

M3P player screen displays flash error please backup the data and format the player How do I correct this and load music to player?

Posted by on

1 Answer

Re: M3P player

Flash error means there is a conflict with your storage or play function you want to select format which will erase and reset your mp3 so it will function properly.

after formating the player will then allow storage of music this error can becaused by overloading storage of player or the mususic files are in the wrong format to play

Posted on Jan 26, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Phillips dvd player recognizes usb flash drive but wont open it

might need to format the flash drive to the phillips dvd player. make sure you back up whats on the flash drive first. plug into dvd and format it. the player should ask you if you want to format flash drive. because when you format the flash drive it will erase all data on it. then reload the data back on the flash drive. try again

Apr 17, 2014 | LG DN898 DVD Player

1 Answer

What is digital screen

A Digital Screen is one where the data provided is in a Digital Word format, and is converted via Digital to Analog converter to produce a signal, to display an image. . Now an Analog Monitor directly takes a varying Analog, voltage, signal, and uses that to display and image.

Apr 23, 2010 | Sony DVP-FX810 Portable DVD Player

1 Answer

Insignia blu-ray player only plays music cd's. Ejects BD's.

Try to clean the player using a bluray cleaning kit. Dont use the dvd cleaning kit as a few can cause problems. Look at packages and see if they can be used on blu-ray players.

If this does not fix the player call Insignia immediately as the laser can be broke and will be expensive to fix. These players have a one year warrante so you should be covered

Dec 26, 2009 | Insignia NS-BRDVD Blu-Ray Player

1 Answer

Insignia blu-ray player only plays music cd'

I would need to know which Insignia Blu Ray player you have to get a better idea of what potential problems you may be experiencing. Model number should be NS-XXXXXXX.

It sounds like the loader is failing, the lens is scratched/dirty, or the firmware isn't performing properly.


Try using a Blu-Ray cleaning kit to clean the lens. Don't use a CD or DVD cleaner kit since these are too harsh for the Blu-Ray lens.

Try updating the firmware to the latest version by going to and searching for your model number. Updates allow for more functionality of your player as well as greater compatibility with Blu-Ray discs and other disc formats.

Hope this helps!

Dec 26, 2009 | Insignia NS-BRDVD Blu-Ray Player

1 Answer

Want to update my sharp blue ray disk player bd-hp21u - does not play current disks

To obtain the software update file, please call 1-800-BE-SHARP (23-74277). Save the update file into a USB drive.
  1. Insert the USB memory device
    with the update file into the BD
    STORAGE/SERVICE terminal on
    rear of this player.
  2. Press SETUP to display the SETUP
    MENU screen.
  3. Press arrow keys to select
    “SETTINGS”, then press ENTER.
  4. Press UP/DOWN keys to select “SOFTWARE
    UPDATE”, then ENTER.
  5. Enter the 4-digit number using 0-9.
  6. Press ENTER to start checking data
    in the USB memory device.
  7. During the data checking,
    “Checking” blinks.
  8. The current version of this unit software
    and the version of the update file on the
    USB memory device are displayed. To
    update this player software with update
    file, select “YES”, and press ENTER.
  9. If the USB memory device is not
    properly installed or the correct update
    file cannot be found on the USB
    memory device, an error message is
    displayed.Check the file on the USB memory
    device, and then reinsert the USB
    memory device correctly.
  10. Press ENTER to start updating.The screen becomes dark for a
    while until the update screen can be
    displayed. Please wait for the update
    screen to appear. Do not unplug the AC
  11. When the software is successfully
    updated, a screen is displayed
    indicating that the update process is
    completed.If the update has failed, check the file
    in the USB device and try Software
    Update again.
  12. Press POWER to turn off the player.
  13. Remove the USB memory device.

Oct 18, 2009 | Sharp BD-HP21U Blu-Ray Player

1 Answer

Discs won't play.

please change laser unite then solve your problem

Jul 16, 2009 | Sony DVP-NS575P DVD Player

1 Answer

The dvd recorder and it hdd can't record since hdd full

Miss Fouzia Morocco

pls try to format all HDD first backup ur data by connecting the dvd recorder to pc then format ur hdd it will help lemme know

Feb 20, 2009 | Funai PY90DG DVD Recorder

1 Answer

Disc error message when load DVD

Are you loading to play or to record?
Commercial DVDs should play.
DVDs for recording may not be recognized by your drive. First make sure that the disc is blank. You must insert a blank disc of the proper format: DVD-R or RW, DVD+R or RW. Even with the proper format, some brands may not behave the same way as other brands.

Dec 24, 2008 | JVC XV-N320 DVD Player

5 Answers

Wharfedale mp3 SLM01 player

have charged as told through my lap top but when i go to put songs onto mp3 player nothing happens. have wharfedale SLMO1

Jan 27, 2008 | Wharfedale DVD-M3 DVD Player

Not finding what you are looking for?
TruTech TT320 Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top TruTech DVD & Blu-Ray Players Experts


Level 3 Expert

6993 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 2 Expert

132 Answers

Are you a TruTech DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides