Question about Bosch SHU3306UC Built-in Dishwasher
check and see if there is water in the base by removing the toe kick. if so then it activated your float micro switch. clear the water from the base. i use a wet vac, but if you don't have one just soak it up with towels. once that styrofoam piece on the left side of the base isnt submerged in water anymore then it should start. it could be a broken hose or bad part. check hoses if you have a rat or mouse lingering. otherwise i have also seen flexable cutting boards blocking the condensation hole on the inside of the tank on the right wall. if you think it was that then just keep those flexy cutting boards on the left side or top rack.
if no water is down there.. then where that styrofoam piece sets on the left side. find that red plastic rod and flip it upward a few times to un-stick the float switch with the dishwasher unplugged first of course.
Posted on Mar 19, 2009
SOURCE: I have a Bosch SHU3036UC
Problems with a washing machine not spinning or not draining are often interrelated..
If you are having a problem with your top load washer then check out thistip...
Washing Machine does not Pump or Spin
If you are having problems with your front load washing machine then checkoutthis tip...
Front Load Washing machine not draining and or not spinning
Posted on Apr 13, 2011
Tips for a great answer:
Dec 09, 2013 | Kenmore Dishwashers
Apr 12, 2011 | Bosch SHU3036UC Dishwasher
Dec 08, 2010 | GE Dishwashers
Jun 21, 2009 | Bosch Evolution 500 SHE45M05UC Stainless...
Jun 04, 2009 | Bosch 24 in. SHU43 Built-in Dishwasher
Jul 29, 2008 | Bosch 24 in. SGS45E02 / SGS45E08 Exxcel...
Jan 07, 2008 | Bosch 24 in. SHU43 Built-in Dishwasher
Jan 19, 2014 | Bosch SHU3306UC Built-in Dishwasher
40 people viewed this question
Usually answered in minutes!