Question about Disteck P4204TWHD Television

2 Answers

Plasma the tv was left on all night and in the morning it was all red and only sound works the picture is red???????????

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: plasma

Have you ever been able to figure out what the IR Code is for the remote to your Disteck TV?

Posted on Jan 29, 2008

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 40 Answers
Re: plasma

First..check your connections at the back of the tv..usually if your running a RGB component connection...if one of the wires is causes the pic to be red..or green..or something like that...if that doesn't your dvd player..and switch the input to dvd..if it is still green..then you will have to remove the back and reseat the LVDS cable...if that doesnt work...replace the Ssb board....good luck

Posted on Jan 27, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Viore 42" plasma tv has

The tv was working fine until this morning, then the picture went out but the sound is still working.
TV is only 3 years old, no real electrical problems

Jan 29, 2011 | Toymax Viore 42 in. Plasma TV

1 Answer

Tv sound works but no picture, was working fine the night before. Got up this morning and the screen is blank. Doesnt sound like anything is buzzing in the back, no fan and no heat. Its a 50 inch flat...

Sounds like one or more boards in your signal process has failed, but most common is the Y-Sustain. When this happens, you only get audio and no picture when the TV is powered on.

Call LG and them know you understand this is a know issue for this TV and you're ASKING for a warranty repair of this knownn issue.

800-243-0000 Before you call be sure to have the complete model and SR number. Example 42PC3D UA.AUSSLJR, 809HJB2983485

Good luck.

Jun 27, 2010 | LG 42PC3D 42 in. Plasma Television

1 Answer

I have a Toshiba 50hp66 that the power light cycles from red to green with a simultaneous clicking of a relay on the power board. I check for power at a few points per the Toshiba service manual and iy is...

Check the fuses on the ysus & zsus boards. Are any fuses on boards open . Disconect power cabels to ysus board first {board on left} . put tv on . if the light is green the ysus board must be replaced.

Mar 28, 2010 | Toshiba TheaterWide 50HP16 50 in. Plasma...

2 Answers

LG RU-42PX10C Plasma TV picture had colored lines & went black...

This will be your Y SUSTAIN board on the left hand side when you take the back off.
Plenty available on ebay, Very easy fix

Mar 05, 2010 | LG RU-42PX10 42 in. HD-Ready Plasma...

1 Answer

Samsung PS50C91HDX Sound but no picture

It sounds like the main board or screen may have gone

Sep 26, 2009 | Samsung 50 in. Plasma TV

1 Answer

I have a Philips Plasma tv 42pf5321d/37 with sound but no picture

Thats the great sound of Exploding capacitors on either the power supply board. or another one in there. Now the set is in fault protection. It tried to warn you with the RED blinking LED that there was something amiss by shutting itself down. When you unplugged you reset the error and allowed it to do it again.

Best Regards and Smper Fi

Jun 23, 2009 | Philips 42PF9630A 42 in. Plasma Television

3 Answers

7 red blinks

Is the light blinking 7 times on front of TV ? If u take the back cover of the TV off you should see two leds on the bottom right of power supply turn on when u push the power button. When the TV go into error protection on the upper left of power supply you should see. A blinking green light. Please inform me of the error it flashes and ill will be able to help further. ( Serveral possiblilties it could be from audio, bad power,and faulty Y-main.)

Apr 28, 2008 | Philips 42PF9630A 42 in. Plasma Television

2 Answers

No picture but sound

sound like the y-sustain board has blown, a common fault on the v5 panels.

Dec 07, 2007 | LG MZ-42PZ44 42 in. EDTV-Ready Plasma...

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Disteck Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

66537 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Disteck Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides