Question about Thomson RCA Bookshelf System with 128 MB MP3 Player, RS2052 Shelf System

2 Answers

CD Door will not open

Help! Just set-up a RCA RS2052 - CD door will not open. Put unit into CD mode, pressed "open/close" button on remote and box - can get the word OPEN to show on LCD screen put nothing happens to the CD door. Unit has never been out of original box until today - hasn't been dropped or anything. Any suggestions?

Thanks

Posted by on

  • 1 more comment 
  • oneblond Jan 27, 2008

    Can not find the key lock on the back of the unit... are you sure my model has such a thing?? Could not find mention of Key Lock in Manual - do you know page #? I have been through this manual about 10 times...

    Anyway, further suggestions? Son says unit opened once, but the CD piece did not fan out - door just opened... Should we try to take it apart or take to service center?? Or just use the other features and forget it? Purchased too long ago to return.

    Thanks

  • oneblond Jan 27, 2008

    Can not return unit - purchased too long ago - any further advise??

  • oneblond Jan 27, 2008

    It appears the keylock is only for the mp3 player since the only lock button I can find is on the small little mp3 player that is with the unit. The lock does not appear on the LCD screen...

    I wish it were that simple... Any other suggestions?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,113 Answers

Hi

I'd say the child lock is on or it is a faulty unit

Link to user manual

Child lock


There is a lock on the back you may have bumped.

from manual...
To avoid accidental key activation, slide the key
lock switch on the back of the unit to the
LOCK position.
The Lock icon can be seen on display.
• Slide to the switch to the OFF position
to unlock keys.

Posted on Jan 26, 2008

  • 2 more comments 
  • Soulvisitor
    Soulvisitor Jan 26, 2008

    Is that the case?

  • Soulvisitor
    Soulvisitor Jan 26, 2008

    Please let me know if this has solved your issue or do you need more information warranty, disassemble/fault finding instructions.



    If not then please accept illustrated solution as below




    Cheers

    Soulvsitor

  • Soulvisitor
    Soulvisitor Jan 27, 2008

    Yes in the manual for a RCA RS2052 page 25 of the manual (32 of the pdf) instructs us on key lock


    If you look at the display is their a pic of the lock shown (ie 4 below)?



  • Soulvisitor
    Soulvisitor Jan 27, 2008

    Sorry it aint that simple, the cd mechansm itself must be the issue, don't really remonend you pulling it apart if your not used to working on equipment, If you are comfortable then you could pull off the covers and try driving the cd mechanism by hand to see if it is just stck, Otherwise take to a repairer or live without cd function looks like your only options.

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 758 Answers

There is a problem with the device itself...what I would recommend you to do is to return it from the store you purchase it...there isnt anything phisycally you can do about the problem you are having...it is the device itself that is defective.

Posted on Jan 26, 2008

  • Jean Sintulaire Jan 27, 2008

    I would recommend you to take the device to a repair center..

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just installed a new rolling code chamberlain garage door. it works fine, however my other garage door opener is a much older sears.


the remote can use only 1 button to open and close if programmed right
open the lid of the seers control box and press the program button then use a different button on the remote to open and close
It would appear that the seers unit is also made by chamberlain

Jun 30, 2018 | Building Materials

1 Answer

What does the purple button light flashing on 1/2 horsepower craftsman garage door opener


I think the adjustment mode is on.

For example, that's from Craftsman manual:

""
Setting the Force
The force setting button is located on the left panel of the motor unit. The force setting measures the amount of force required to open and close the door.
1. Locate the purple button on the left panel of the motor unit (Figure 1).
2. Push the purple button twice to enter the opener into Force Adjustment Mode (Figure 2). The LED (Indicator Light) will flash quickly.
3. Push the remote control or control console (Figure 3). The door will travel to the DOWN (close) position.

""

Actually, you should just read carefully your garage door opener unit's manual.

Craftsman Garage Door Opener Remote

Jun 21, 2014 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Light and lock buttons nonfunctional


There are certain models that had only a door bell type wall control and didn't have the lock and light functions. You may have one of these and someone has replaced the wall control with the three button model. If it did work in the past and has quit it is most certainly the logic board and is expensive to replace.

You say it is STILL stuck in the "lock" mode. If you cannot use your remotes you need to program it. Find the smart/learn button just to the left of all those white wires. Press and hold the button on a remote while you press and immediately release the smart/learn button. Do this for each remote.

Aug 23, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

1997 venture keyless remote programming


SYSTEM OPERATION

System warning lamp located on top of the instrument panel
Press UNLOCK button once , turns on interior lamps and deactivates alarm (if fitted)
Press UNLOCK button twice w/in 5 seconds unlocks all doors, turns on interior lamp and deactivates alarm (if fitted)
To activate alarm system (if fitted):
Switch ignition OFF
Open driver's door
Press Lock button on remote
Close Driver door
warning lamp will flash when system is activated
Press remote power sliding door button will open sliding door (if fitted) only if unlocked first
Pressing remote panic button:
*Sounds horn intermittently
*Flashes exterior lamps
*Turns on interior lamps
**Pressing panic for the second time OR switching ignition ON deactivates alarm.


PROGRAMMING
Remobe key from ignition switch
Remove the "BCM PRGRM" fuse, from the fuse box
Close all doors
Turn ignition switch to the ACC position
With in 1 SECOND , turn the ignition switch to OFF then back to 'ACC'
(really, with in one second)
Open and close the driver's door. A chime will sound, indicating programming mode activated
Press and HOLD LOCK and UNLOCK SIMULTANEOUSLY untill a chime sounds 2 times ( about 15 seconds)
Repeat this exact procedure for all remotes to be programmed
Remove key from ignition
Refit 'BCM PRGRM' fuse.

4 REMOTES MAXIMUM CAN BE PROGRAMMED

Aug 24, 2008 | 2000 Chevrolet Venture

2 Answers

My rca 5 disk vertically stacked cd changer is stuck. Won't open. How to fix it?


Try this... unplug the unit and turn it upside down.  Have a small screwdriver ready.  No plug the unit in and try to turn the wheel in the large slot clockwize.  When you see the spring clip try to grab the white plastic stop and move it clockwize.  This should eventually open the door.  It did for me.

Aug 03, 2008 | Thomson RCA Bookshelf System with 128 MB...

1 Answer

When I key in the code the garage door closes, but when I key in the code to open the door, nothing happens It is actually a Skylink garage door opener but unable to find in the selection list


MANY UNITS NOW HAVE A ONE BUTTON CLOSE FEATURE. THIS WILL CLOSE THE DOOR WITHOUT PRESSING THE PROPER CODE.

HOWEVER, IT WILL NOT OPEN THE DOOR WITHOUT THE PROPER CODE.

SOUNDS LIKE YOU HAVE A REMOTE THAT WILL SEND A CODE AND CLOSE THE DOOR. IT MAY NOT BE ABLE TO BE PROGRAMED TO OPEN THE DOOR. YOU CAN GET AN EXTERNAL UNIVERSAL RECIEVER IF CHAMBERLAIN OR LIFTMASTER ARE ON THE LIST THAT WOULD WORK.

HOPE THIS HELPS

Jun 29, 2008 | RCA Universal Remote Control

5 Answers

Pioneer xc-f10


switch the unit off

With the unit off press the menu button

The Unit now switches on and

you will now be presented with DEMO mode on the Screen

Press the + on the remote

The screen will now display Sensor Mode

Press Set

Press + twice until Sensor Off is displayed

Press Set

Unit switches off

Jun 15, 2008 | Audio Players & Recorders

1 Answer

Cd door won't open


You might remove the case and remove the disks. Uplug first.
Be carefully not to force or bend parts. retry

May 06, 2008 | Thomson RCA Bookshelf System with 128 MB...

Not finding what you are looking for?
Thomson RCA Bookshelf System with 128 MB MP3 Player, RS2052 Shelf System Logo

514 people viewed this question

Ask a Question

Usually answered in minutes!

Top Thomson Audio Players & Recorders Experts

shaun taylor

Level 3 Expert

1527 Answers

 Grubhead
Grubhead

Level 3 Expert

5554 Answers

Marvin
Marvin

Level 3 Expert

82322 Answers

Are you a Thomson Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...