Question about Nintendo Game Boy Advance Console

2 Answers

Rca rcr860 universal remote control

I have used the auto search on this remote control and I found the code for my TV but I don't know what key to press to save the code. Can somebody help me?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 106 Answers
Re: rca rcr860 universal remote control

Fiend your solution direct from nintendo. Here is your solution....


Posted on Jul 23, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: rca rcr860 universal remote control

I have the book and it shows that once you get the code, which you can do by pressing and holding the component key (tv) that you want at the same time push the ON-OFF key. All of the aux keys should light up and when you release both keys,the one you want will stay on. Next you manually turn the tv on. Press the ON-OFF key on the remote until the tv turns off. To set the code, press the STOP button. That will set the remote for you.

Hope this helps.


Posted on Jan 28, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I was using this TV for my Wii Console. Now when switching on TV says: NO SIGNAL! I do not have a remote and do not know to search for signal. I changed cable to HDMI1 and 2 but no change

How did you operate and set up the TV without the remote previously?

In any event you can purchase a universal remote from an electronics store. Pick one that is marked as working with your brand of TV.
As long as the TV is set in the correct mode for TV reception and has the correct tuner, and as long as you can use that remote to access the onscreen menu, you will be able to set up a channel search and get TV reception restored.

Before you do anything just check that the TV is in the correct mode for TV reception and not set instead as a monitor for connection to another device.

Dec 27, 2015 | Video Game Consoles

1 Answer

Can I use the remote control that came with my VizioTV (Model# XVT423SV) to control the PS3 and the Bose CineMate Series II speaker system?

I don't think that you are able to do this. I know that Sony sells its own remote to control the PS3. However, if you get a universal remote from an electronics store you might be able to do both the speaker system as well as the television with one remote, limiting your number of remotes down to 2. Last I checked, the PS3 Blu-Ray remote was under $20, and you can find cheap universal remotes as well, probably for less than that.

May 16, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

How do i program this old rca vcr remote to control my sharp tv

Unless it has "universal" capabilities, it won't really be able to control a different brand. Unless they are the same company/brand, you won't really be able to have it control a separate brand, good luck!

Mar 03, 2011 | Video Game Consoles

1 Answer

• the remotes have stopped working and they have new batters in them

  • 1 Manually turn on the device you wish to program.
  • 2 Press the Code Search button on the remote until the indicator light turns on.
  • 3 Release the Code Search button.
  • 4 Press and release the button for the device you are programming.
  • 5 Enter the three-digit code for the device using the number buttons on the remote. After the code is entered, the indicator light turns off. (find codes at link below)
  • 6 Aim the remote at the device and press the power button. The device should turn off.
  • 7 Press Channel Up on the remote with the device on. If the device responds, no further programming is required.
  • 8 To look up a device code to enter directly into the remote, you can visit the GE Remote Code Locator Web site (see Resources).

  • Read more: How to Program a GE Universal Remote Control |

    Aug 23, 2010 | Nintendo Wii Console

    2 Answers

    I have a Xbox 360 universial remote but i need it to change channel on the tv so i can play my Xbox games

    You have to use your original Tv remote. You cannot use the XBOX 360 remote. thats for the 360..If you have lost your original tv remote.. by a new one.

    Apr 09, 2010 | Microsoft Xbox 360 Universal Media Remote

    1 Answer

    Programming the remote to my tv do not no the tv code

    The code can either be automatically found or you can look it up online. To automatically program it follow these steps:

    Turn on the TV, and then point the remote control toward the TV. Then press and hold the TV button and the OK button at the same time for two seconds. Then all of the buttons will light up for two seconds, then only numbers 1-12 will stay lit.
    Then press the CH+ button to send a series of off commands to your TV. Continue pressing until your TV turns off.

    Give enough time for the TV to respond to the off command after you press each button. Some TVs take more time to react to off commands than other TVs.

    Press the TV button to save the code and to exit. All the buttons on the remote control will blink three times to confirm the code.

    If this does not work then repeat the steps up to the point where the 1-12 buttons light up. Then go to this site and find your TVs code, there will most likely be a few codes for your TV, try each one until one works:

    After you enter the code, press CH+ again until your TV turns off.

    That's it, you shouldn't have a problem anymore. Good luck.

    Feb 13, 2010 | Microsoft Xbox 360 Universal Media Remote

    1 Answer

    I have Microsoft Xbox 360 Universal Media Remote and can't get the TV codes to work on my Viewsonic TV. I tried manaully scaning for a code without luck. Can any one suggest a TV code for a Viewsonic...

    just to be sure go thru the steps for the remote to scan properly:

    If you already went thru these steps then I would suggest going to this page:

    It has all the codes for viewsonic tv's. If you go thru all these codes and you manually have the remote try to find a working code but to no avail, then the remote is not compatible with your TV, but there is always the last step of calling Microsoft support:

    If they cant help then you know for sure the remote isn't compatible with your TV.

    Jan 23, 2010 | Microsoft Xbox 360 Universal Media Remote

    1 Answer

    Trying to program xbox360 universal remote. found

    hey christy, to turn the tv on first push the desired device button like tv from the options tv,vcr,dvd etc. and then press the power button on..!!
    it should work

    Dec 14, 2009 | Microsoft Xbox 360 Universal Media Remote

    2 Answers

    I synced it to the tv but I dont know how to sync it to the xbox

    You shouldn't need to sync it to your x-box.

    By clicking on the TV button it will change from your TV to the XBox.

    Jul 26, 2009 | Microsoft Xbox 360 Universal Media Remote

    Not finding what you are looking for?
    Nintendo Game Boy Advance Console Logo

    30 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Nintendo Video Game Consoles Experts

    Troy Gorman
    Troy Gorman

    Level 3 Expert

    508 Answers


    Level 2 Expert

    567 Answers

    Paul Layton

    Level 1 Expert

    57 Answers

    Are you a Nintendo Video Game Console Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides