Question about Directv RC23 Remote Control

2 Answers

Program Code What code can I use to program a Direc TV HD receiver?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Program Code

Panasonic. Tower DVD /VCR. Program. Director M13 universal

Posted on Mar 08, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    Uploaded 5 video answers.

  • Expert
  • 152 Answers
Re: Program Code

DIRECTV Model D-10 00001, 00002
Hughes Network Systems (most models) 00749
Hughes Network Systems models GAEB0, GAEB0A, GCEB0, GCEB0A,
HBH-SA, and HAH-SA 01749
GE models GRD33G2A and GRD33G3A, GRD122GW 00566
Hitachi model HDS210R 00819
Mitsubishi HD models SRHD400 and SRHD500 00749
Panasonic models TZ-DBS01 and TZ-DRD100 00247
Panasonic models TUIRD10 and TUIRD20 00701
Philips models DSX5150R,DSX525R/I, DSX5350R, DSX5353R,
DSX5353X, and DSX5375R 01076
Philips models DSX5500 and DSX5400 00099
Proscan models PRD8630A and PRD8650B 00566
RCA models DRD102RW, DRD203RW, DRD301RA, DRD302RA,
DRD303RA, DRD403RA, DRD703RA, DRD502RB, DRD 503RB,
DRD505RB, DRD515RB, DRD523RB, and DRD705RB 00566
RCA models DRD202RD, DRD221RD, DRD222RD, DRD223RD
DRD455RH, and DRD486RH 00392
Samsung model SIR-S60W 01109
Samsung models SIR-S70, SIR-S75, SIR-S300W, and SIR-S310W 01108
Sony models (All models except TiVo and Ultimate TV) 01639
Toshiba model TSR101DSS 00790
Uniden model UDS100 00724
Setup Codes for DIRECTV HD Receivers
DIRECTV Model H-10 00001, 00002
Hitachi model 61HDX98B 00819
HNS models HIRD-E8, HTL-HD 01750
LG model LSS-3200A, HTL-HD 01750
Mitsubishi model SR-HD5 01749, 00749
Philips model DSHD800R 01749
Proscan model PSHD105 00392
RCA models DTC-100, DTC-210 00392
Samsung model SIR-TS160 01276
Samsung models SIR-TS360 01609
Sony models SAT-HD100, 200,300 01639
Toshiba models DST-3000, DST-3100, DW65X91 01749, 01285
Zenith models DTV1080, HD-SAT520 01856
Setup Codes for DIRECTV DVRs
HNS models SD-DVR80, SD-DV40, SD-DVR120,
Philips models DSR704, DSR708, DSR6000,
DSR600R, DRS700/17 01142, 01442
RCA models DWD490RE, DWD496RG 01392
RCA models DVR39, 40, 80, 120 01442
Sony model SAT-T60 00639
Sony model SAT-W60 01640
Samsung models SIR-S4040R, SIR-S4080R, SIR-S4120R 01442

Posted on Jan 26, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

How to program a rcr804bfdr to a sanyo tv

Programming the RCA RCR804BR or RCR804BFDR Series Remote Control
Programming with Direct Entry:
To program your remote to control up to four components, follow these steps:
  1. Manually turn on the component you wish to program the remote to operate.
  2. Find the four-digit code for your brand of TV, VCR, DVD, satellite receiver, cable box, or digital TV converter in the enclosed code lists.
  3. Press and hold the CODE SEARCH key until the indicator light turns on.
  4. Release the CODE SEARCH key.
  5. Press and release the TV, VCR or SAT·CBL·DTC key. The indicator light blinks and then remains lit. Note: DTC references digital TV converter. To program the DVD·AUX key: Press the DVD·AUX key. To control a DVD, press the VCR key. To control a TV, press the TV key. To control a satellite receiver, cable box, or digital TV converter, press the SAT·CBL·DTC key. The indicator light stops blinking and remains lit.
  6. Enter the four-digit code, using the numeric keypad. After the code is entered, the indicator light turns off. Note: If the indicator light blinks multiple times, you've entered an invalid code. Start from step 2 again.
  7. Aim the remote at the component and press the ON·OFF key. The component should turn off. Note: If your component does not respond, try all the codes for your brands. If the codes do not work or your brand is not listed, try the Code Search Method that follows.
Programming with Code Search:
If your TV, VCR, DVD, satellite receiver, cable box, or digital TV converter does not respond after you have tried all the codes for your brands, or if your brand is not listed, try searching for your code via the Code Search Entry Method. To program your remote via the Code Search Entry Method, follow these steps:
  1. Manually turn on the component you wish to program the remote to operate.
  2. Press and hold the CODE SEARCH key until the indicator light turns on.
  3. Release the CODE SEARCH key.
  4. Press and release the component key you wish the remote to control- TV, VCR or SAT·CBL·DTC key. The indicator light blinks once and remains lit. Important: Find the ENTER key on your remote (don't press it yet). You will need to press this key quickly in step 6 below. To program the DVD·AUX key: Press the DVD·AUX key, followed by the component key you wish the DVD·AUX key to control. For DVD, press the DVD·AUX key, followed by the VCR key. For an auxiliary component, press the DVD·AUX key, followed by the corresponding component key ( TV, VCR, SAT·CBL·DTC ).
  5. Press and release the ON·OFF key until the component turns off. Important: You may have to press the ON·OFF key up to 200 times.
  6. As soon as the component turns off, press the ENTER key within 4 sec- onds. The indicator light turns off. Note: If you wait longer than 4 seconds to press ENTER, the remote goes to the next code-you will need to start the code search from step 1 again.

Dec 24, 2014 | RCA Remote Controls

1 Answer

Will not program to audio receiver

Check whether there is any setup code for your Audio device with this remote control. Check its code list. It it has:
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Apr 20, 2012 | RCA 6-Device Universal Remote

1 Answer

I just purchased a new toshiba 46' TV and need to the code to make my motorola remote work for it,can you help me please?

have a flat screen RCA HD tv and a HD receiver. Want to program AVEX R6 universal Remote Control and have followed all instructions and can't seem to get it to work at all. Have tried several times and can't get it to function. Need help.

Dec 26, 2009 | Motorola Remote Controls

2 Answers

First before I begin, please do not ask me to pay anything to get an answer for codes that is terrible. It is only numbers that we need. I purchased a emerson jumbo remote for my mother. She recently just...

Most likely the Emerson remote was programmed many years prior to the satellite receiver manufacturer loading their code into the box. (I have a similar remote) The fact is that remote may simply be too old to accept the newer code format that manufacturers now use. I cannot remember if that remote has a learn function, if it does you can teach it the satellite remote frequency though it may be button by button.

As an altertnative the links below may offer some choices.

An example:

Dec 05, 2009 | Directed 434MHZ Remote Control

1 Answer

Setup Code for Direct TV

To Whom i may concern,

Here are some codes from Directv that should work with that remote and television.
10171, 11326, 10463, 10150, 10154

If you still need help trying to program your remote please feel free to cantact me by phone @(361)510-0339 my name is Jonas and I am a Directv Installer/ Techniciain Specialist

Jun 12, 2009 | Remote Controls

4 Answers

Codes to program Innovage Products Jumbo Universtal Remote

Innovage Jumbo remote codes for RCA TV; 000, 003, 004, 005, 007, 009, 011, 015, 048, 082, 092, 094, 096, 098, 102, 103, 107, 113, 125, 129, 167, 179, 187, 188, 191,194.
Pansonic DVD; 175.
Pansonic VCR; 021, 060, 115, 125, 138, 148, 149.
Philips DVD; 173, 183, 198.
Bell ExpressVu; 168, 187, 194.

Dec 18, 2008 | Remote Controls

2 Answers

How can i program my rc16 direc tv remote control to my philips tv

1.Press menu on your remote and then go to settings and press select on setup.

2.Go to remote and then go to reset remote.

3.Press and hold MUTE and SELECT until the light above the mode on tv switch on the remote flashes twice.

4.Enter the code using the numbers on your tv. have cleared AV1,AV2 and tv modes.Move the switch back to DIRECTV;press select on done.

Jul 10, 2008 | Directv RC23 Remote Control

12 Answers

Jumbo Universal TV Remote (Sharper Image-Innovage)

sharper image jumbo remote can't get it to program my philips/magnavox tv.

Dec 25, 2007 | One For All URC-9910 LCD Remote Control

3 Answers

Olevia 232t remote code

Go to Best Buy and buy the DirectTV Universal Remote Control Model RC64 ($20). It will control both the Satellite Receiver and the Olevia TV (Everything on the Olevia except the A-B-C-D Guide buttons). The Remote Control User Guide lists the control codes, four for the Olevia. The codes are:

Satellite Receiver: 00392

Olevia 235-T12: 11610 (last of the four codes listed for Olevia)


Nick from Ft Myers

Dec 21, 2007 | Directed 434MHZ Remote Control

3 Answers

Emerson Remote code

Get back to me with model and make of the remotes themselves, I'll see what I can find. Or you can check out Good Luck

Sep 14, 2007 | RCA RCU300 Remote Control

Not finding what you are looking for?
Directv RC23 Remote Control Logo

1,883 people viewed this question

Ask a Question

Usually answered in minutes!

Top Directv Remote Controls Experts

john milligan

Level 3 Expert

506 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

66587 Answers

Are you a Directv Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides