Question about LG LMVM1955 Microwave Oven

1 Answer

No key's work. Display and inside light is working

Display asks for "time of day". No keys will respond when pressed.
Vent and Light button works intermittantly.
When you open door light goes on normally inside microwave.
I tried unplugging unit for hours, then plug back in. Same problem

Posted by on

  • redlickp Jan 26, 2008

    Thanks--where can I purchase the board? I have found the cable's, and have disconnected and re-connected the cable many time's with no help,

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 317 Answers

The Keypad is either faulty, or disconnected. Open the case, and remove the screws, holding the outer shell on. Inside, there should be a small board that covers the Keypad. Check to see if there is a ribbon cable, or some other type of connection going from the board to another part of the microwave. If all of the wires are connected, then you will probably need to replace the keypad.

Posted on Jan 26, 2008

  • Alexander Selby
    Alexander Selby Jan 26, 2008

    Try surfing the web for a 3rd party supplier or call the manufacturer and see if they can send you a replacement one.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Advantium 120 microwave shows the time, but none of the buttons respond to being pressed.


Try turning it off at the power switch,leave off for several seconds then switch it back on, it may reset the control unit, if not take it to a repair outlet,

May 27, 2015 | In Microwave Ovens

1 Answer

Digital button on kenmore microwave does not respond when pressed could this be a fuse or is key pad gone


Considering the problems you are having it would be cheaper to replace the microwave oven.

May 22, 2012 | Kenmore Microwave Ovens

1 Answer

Cooktop Light / Night light


It is the control panel. You can actually just replace the circuit board on the control panel and it should fix this.

Nov 10, 2008 | GE JVM1650 1000 Watts Microwave Oven

1 Answer

Nothin works on my key pad


Here are lock / unlock schemes for three recent Sanyo models:

- Press and hold Stop/Cancel for 3 seconds
- Press and hold Stop/Reset for 3 seconds or so
- Press Stop/Clear five times

Hopefully one of those will work.

If none of these work for you, contact Sanyo Service Customer Service.

We're happy to help and we appreciate your thoughtful rating of our answer.

Jul 10, 2008 | Sanyo EM-V5405SW 1200 Watts Microwave Oven

1 Answer

How do i set clock for time of day


You can download your owner's manual free here.

From the manual:

SETTING THE CLOCK - When the microwave oven is plugged into an outlet, the oven will display " 0:00 "

1. Press the CLOCK button; the hour digit will blink
and the clock indicator will light.

2. Press the number keys to set current hour.

3. Press the number keys to set current minute.

4. Press AM/PM to choose AM or PM.

5. Press the CLOCK button again; the display will
show the present time. After the clock has been
set, the time will appear with blinking colon,
unless the oven is cooking or defrosting.

NOTES:

- To reset the present time in the display window when the oven is off, press the CLOCK button and
reset.

- If you make a mistake when setting the time, press the STOP/CLEAR button.

- To recall the actual time while the oven is cooking or defrosting, simply press the CLOCK button
and the display will show the actual time for three seconds.

We're happy to help and we appreciate your thoughtful rating of our answer.

Jul 03, 2008 | Emerson MW8107WA Microwave Oven

2 Answers

I have an Emerson Microwave Oven MW8997W and cannot change the hour (time) on my clock. How do I change the clock? Debbie


If your keys do not work at all, you probably have a bad keypad, in which case I'd ask you to reply back. In the meantime:

SETTING THE CLOCK

When the microwave oven is plugged into an outlet,
the oven will display " 0:00 "

1. Press the CLOCK button; the hour digit will blink
and the clock indicator will light.

2. Press the number keys to set current hour.

3. Press the number keys to set current minute.

4. Press AM/PM to choose AM or PM.

5. Press the CLOCK button again; the display will
show the present time. After the clock has been set,
the time will appear with blinking colon, unless
the oven is cooking or defrosting.

You can actually download your owner's manual here

We're happy to help and we appreciate your thoughtful rating of our answer.

Mar 10, 2008 | Microwave Ovens

1 Answer

GE SpaceMaker JVM XL1800


Sounds like the ERC board failed. It maybe covered under warranty, check that first cause a new ERC could cost around $150-$200. Anything electric can cause the .."what the*^&% just happened syndrome.

Dec 09, 2007 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

LG LMVM2055SB over the range microwave keys not working


Is it possible someone may have sprayed cleaner directly onto the keypad area?

This causes moisture to get into the keypad and sometimes onto the control board.

This could mean that they control panel frame with keypad (membrane switch) would need to be replaced.

Can you give more details on the cleaning?

Nov 18, 2007 | Microwave Ovens

1 Answer

1800 XL JVM1860BD - won't work


It sounds like your controller may be failing. Or it could be an electrical line problem. Any other electrical itmes giving you trouble? Has anyone measured the voltage level of your power line? It should be around 110-125 volts AC. If it's significantly lower or higher, you may have a bad connection in your breaker panel or in the wiring leading to the home.

Aug 14, 2007 | GE Spacemaker JVM1640SJ Microwave Oven

Not finding what you are looking for?
LG LMVM1955 Microwave Oven Logo

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9098 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

129 Answers

Are you a LG Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...