Question about Projection Televisions
I am looking for Samsung DLP TV Model HL-R4667W. If anyone of you has it, please email to firstname.lastname@example.org. Thanks!
If all 3 leds blink, it can be the lamp, ballast (lamp driver), color wheel, or dmd board (all are engine parts = engine failur). its usually the lamp, but you can listen to troubleshoot. when it turns on, you will hear the fans come up (humm..airflow noise), then you will hear the colorwheel (high pitched squeel.. it will come up to speed) and then the ballast will fire up the lamp.. if the lamp doesn't fire, you will hear the spark gap fire (a 1 second buzz noise indicating bad lamp).. the gap will fire 3 times, they tv will then retry again and again until it shuts off and kicks out the error. this power up path will help you listen to find your problem. i can assist further.
Posted on Jan 08, 2009
Remove the rear cover and check the lamp cover switch. Earlier versions used a black plastic switch holder that may break due to improper assembly. The part number for the holder is BP61-01240A. Newer versions use a metal tab attached to the engine. In this case, improper assembly may cause the lamp cover switch to be extended past its range, either breaking the switch or causing it to have an open contact. Replace the switch with BP91-01231A.
Note that in these models, when reinstalling the rear cover, it is best to remove the lamp cover first, install the rear cover, then install the lamp cover. This will make sure that the lamp switch is properly engaged.
Posted on May 02, 2009
I just called customer support and my issue is now fixed, to my extreme surprise.
It sounds silly (and a tad embarrassing), but here's what I did:
1) Unplug the TV
2) Wait 30s
3) Plug the TV in
Apparently even if the TV is "off" for a few days it never fully shuts down unless the power is unplugged. Not sure if this will help anyone else, but I had the exact same problem others are describing. Good luck!
Posted on May 06, 2009
Its your Lamp if you have sound and no picture.
CK the lamp Fan make sure it is running.
Lamps Prices depend on where you buy.$85.00 up to $300.00 Look on E-Bay under Electronics/ Lamp number-BP
Mats Electronics has them for $99.00
remove your Lamp and look in middle of it,that will tell you if it is busted.
Posted on Mar 03, 2010
Tips for a great answer:
May 18, 2012 | Samsung HL-R4667W Rear Projection...
Jun 30, 2010 | Samsung HL-R4667W Rear Projection...
May 27, 2010 | Samsung HL-R4667W Rear Projection...
Apr 05, 2010 | Samsung HL-R4667W Rear Projection...
Feb 20, 2010 | Samsung HL-R4667W Rear Projection...
Nov 28, 2009 | Samsung HL-R4667W Rear Projection...
Oct 30, 2009 | Samsung HL-R4667W Rear Projection...
Mar 21, 2009 | Samsung HL-R4667W Rear Projection...
Oct 24, 2016 | Mitsubishi WS-48413 48" Rear Projection...
763 people viewed this question
Usually answered in minutes!