Question about Lands Phones

1 Answer

No dial tone unless on speaker

I have the cd440 phone. the speaker works great but when its on the receiver i can not hear a dial tone or anyone talking. the phone is only a few days old. it came with two phones and it's the 1 phone that is doing this. #2 phone works fine.
Joy

Posted by on

  • 2 more comments 
  • jexnicious Jan 28, 2008

    thank you for your help. i am not sure how to check if the handset is registered.

  • Anonymous Feb 15, 2008

    Hello I bought a used handset to match my base. Phone works only if it is on speaker phone incoming or out going calls. I did de-register and re-register the handset to the base.




  • Anonymous Oct 22, 2008

    Same as above...

  • Anonymous Jan 29, 2009

    When I pick up the receiver there is no dial tone nor does it pick a line. There is only a dial tone when I place on voice...I have no speaker phone! How do I get my dial tone back on the receiver and it pick automatiocally a line?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Suggest you check battery in non working handset is connected and charged. If this is ok, suggest you check this handset is registered with the base station, as out of the box they arent always set to the same channels

Posted on Jan 26, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can not hear dial tone or hear caller / can hear on speaker call


Most likely that it is the speaker on the handheld part of the phone. Your sound comes from the base itself when you put your current connection on Speaker-Call. So if you cannot hear the dial tone OR the person on the other end unless on "speaker" it's just the handheld and I believe there are places online you can purchase JUST that part if needed.

Oct 19, 2014 | AT&T ATT-1855 Corded Phone

1 Answer

My idect twin solo second handset only works through speaker phone


My second set no display on Panasonic Mode KX-TGACM

Dec 21, 2013 | Lands Phones

1 Answer

My panasonic cordless phone model # KX-TG2258S the handset works but when you dial or talk or even just pick up the phone you don't hear any noise at all. not dial tone but it does call out. you just...


Do you even hear white noise? If not, it sounds like your phone's speakers may be broken, or it has water damage. If your landline is connected to more phones, ask yourself these questions:

Do all of the phones have this problem? If so, it's a problem with your connection, not the speaker.

Is there a volume button anywhere on the phone or the base? Try turning it up.

Do my phones make a "beep" noise when i push the buttons? If not, did they used to? If they don't, then it's likely that the speaker is no longer working properly.

You may need to contact panasonic and see if they will replace it for you.

Hope this helped! Please rate my solution!
- Frankie

May 06, 2011 | Panasonic 2.4GHz Digital Cordless...

1 Answer

The phone rings,states the number calling but you can't talk to the caller. When you answer the phone, the person on the other end can hear you, but you can't hear anything. You can't get a dial tone when...


The switch that the handpiece activates is not working. Could be optical, magnetic or physical. It may need cleaning, adjusting or a wire connection repaired. Also check the curly cord and its connections between the handpiece and telephone.

Nov 17, 2009 | Sakar Talking Caller-ID Speaker Phone

1 Answer

When I hit hook to send a fax I hear a click but I get no dial tone and the same on receiving a fax MP830


You only hit hook to hear the dial tone or use the machine like a speaker phone. To send a fax you press fax start. If you can't hear a dial tone when you press hook, there is something wrong with the phone line connection, or it's plugged in to the wrong plug on the machine. The phone line goes into the one marked with an L, the other with the pic. of a phone is for an additional telephone.

Oct 13, 2009 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

No dial tone


you may need to contact panasonic to get a servce center referral because the speaker is already damaged in your phone

Jul 25, 2009 | Panasonic KX-TG5632 Phone

1 Answer

No tone unless speaker is used.


Have you changed the fasica? if so you may have disposed of the speaker as it sits in the old fasica
where the grill is

May 22, 2009 | Nokia Consumer Headset

1 Answer

Can not hear dial tone or anyone on other line


your problem is not about the monitor,but i'm sure speaker in the phone is defective.try to replace it with a new one.

Oct 19, 2007 | Gateway FPD2275W LCD Monitor

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Cindy Wells

Level 3 Expert

5387 Answers

yadayada
yadayada

Level 3 Expert

79186 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...