Question about PC Desktops

2 Answers

ViewSonic 27 inch N2750W monitor will not respond to remote or on monitor menu no menu, monitor turns on and bright colors rotate every few seconds. I have new battaries in remote, powers on sound works from source component but no picture. SOS Don B jan 25

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has answered 200 questions.

  • Expert
  • 202 Answers
Re: ViewSonic 27 inch N2750W monitor will not respond to...

There is a hardware problem in your monitor. Probably a loose contact or burt out connection of solder on the main board. Try calling someone who has some knowledge on the main board electronics (try some good friends). Atmost, u may have to change the controller / main board.

Good luck.

Have a nice day. 

Posted on Jan 26, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 407 Answers
Re: ViewSonic 27 inch N2750W monitor will not respond to remote or on monitor menu no menu, monitor turns on and bright...

Plz change your remote .....

Posted on Jan 26, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to fix Syncmaster 2494hs touch menu problem?

Have you tried doing a factory reset on the monitor? If the problem persists, then it could be an electronics fault or a stuck button.

May 11, 2014 | Samsung PC Desktops

1 Answer

Display is rotated

you may changed the VGA options or your monitor adjustment. for the first one, right click in desktop, select personalize- display setting , then change orientation to landscape. for the second one, on your monitor press the menu key and find reset setting.

Feb 07, 2014 | PC Desktops

1 Answer

Compaq monitor auto adjusting

Press the button labeled "Auto" on the front of your Compaq monitor. This runs an automatic configuration utility designed to examine your current settings and adjust them to reach the best possible picture quality.

This utility will take only a few seconds and will adjust things like the sharpness, brightness and resolution of the image being displayed. Press the "Menu" button on the front of your Compaq monitor to adjust your monitor's screen settings manually in the event that the auto configuration utility has not done so to your liking.

Navigate to the "Picture" category of your Compaq monitor's on-screen menu to adjust settings like "Brightness" and "Sharpness." These settings can be useful if your monitor is displaying an image that is fuzzy or too dim.

Use the "Color" setting to adjust the amount of red, green and blue that your monitor displays. These settings can be useful if your monitor is displaying too much of one color or not enough of another.

Use the "Default" menu option to reset your Compaq monitor to its original factory settings. This changes any settings you have altered back to the way they were set when the monitor left the Compaq factory

hope this helps

Sep 05, 2012 | Compaq PC Desktops

1 Answer

ViewSonic N1930w-2M turning on in gray in stead of color and will not link to computer

Sounds like like the viewsonic has seen it's better days or the Video Card in the computer is bad. To isolate the problem try connecting another monitor to the computer. Borrow a monitor from a neighbor, friend, relative or co-worker and connect it to the computer. If the Borrowed monitor displays correctly, then your original ViewSonic is bad. If the Borrowed monitor does the same as your original ViewSonic, then the Video Card in the computer is bad.

May 16, 2012 | ViewSonic PC Desktops

1 Answer

My viewsonic flat monitor screen is not working properly! I plugged everything in and I've checked it so many times.I turn on the computer than When I turn on the monitor I can still kind of see the...

the viewsonic lcd has lost the backlight. realistic at the price of a new monitor the labor and parts to replace the backlight make repair not practical. there are parts and instructions available online and I have replaced them. not fun

Apr 18, 2011 | PC Desktops

1 Answer

At start up my viewsonic va1912wb display blinks several times then i can see the picture but it is dark almost unreadable. Today it went darker than yesterday. HELP!

If it is dark due to brightness adjustment, get that adjusted. Usually when you adjust the brightness by pressing the menu button, the menu screen would not be dark. If everything is dark dark dark and you can only see some display but in very pitch darkness, then your monitor is a goner, backlit for the monitor is dead, and your monitor will need to be replaced. You can fix the backlit tubing, however it is risky, and expensive, and would cost less if you bought a replacement.

Jan 30, 2011 | PC Desktops

1 Answer

Adjust color bright&contrast

there will be adjustable in monitor menu when u click menu on your monitor there it will show adjusting contrast and brightness
after doing above still having a problem......there will be internal monitor problem call hardware engg

Sep 24, 2010 | PC Desktops

1 Answer


1. Use the menu on the monitor to turn up the volume
2. right click anywhere on the desktop- select properties - select the "settings tab" at the top - click on the "advanced" button. this will open your video cards display settings .
you will need to look for a brightness controll or color corection section to adjust the brightness as all video cards have different software for controll.
Gamma will increase you brightness also. a ballance od gamma and brightness is neccessary, so change em both small amounts , then check your desktop or applications, then re-adjust.
This should Fixya up ! Please rate.....

Oct 28, 2008 | PC Desktops

1 Answer

I have viewsonic 2230wm screen and it has gone white Put another screen onto PC it is ok , so fault with monitor

Check video cable to ensure all pins are straight. If the cable is detachable, try a different video cable.

Check the OSD menu settings (contrast, brightness, color adjustments). use the reset option to reset the monitor back to factory settings.

Check the user's guide to see if any special conversion connector or adapter is required for proper signal continuity between your specific video card and your model of LCD.

If that doesn't work, you have pretty much exhausted the things a user can do with it. here is the support contact form for Viewsonic:

Jul 14, 2008 | ViewSonic PC Desktops

4 Answers

LG Flatron w1952TQ (black)computer monitor way to BRIGHT!! How do I tone it down.

There are few buttons in the monitor select the menu button choose the Brightness and contrast change the setting of that and see which is comfortable and choose .same prob inform to

May 13, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts


Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

18259 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides