Question about Televison & Video

1 Answer

TV makes chirping noise, won't turn on!

Philips Smart Series 32 inch TV won't come on, press power button, nothing, light won't even come on, chirping noise when plugged in. TV is 7 years old

Posted by on

  • Oscar52 Jan 26, 2008

    By the way this is not a projection TV. Anyway you asked for a chassis number: 32M800 7603. Thank you so much for your help, I live 60 miles from the nearest repair shop, and 17 miles of that is nasty dirt road, so some information ahead would be helpful before I drag this TV to town, thanks again!!

  • Anonymous Mar 27, 2014

    Constant chirping

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,617 Answers

That usually means a problem in the start up or deflection circuits. Diode, Horizontal ouput or driver transformer. What Chassis is this set, and I will be ableto give you some better information. Rca , GE and phillips need to be diagnosedwith the chassis number. Let me know the chassis.

Posted on Jan 25, 2008

  • Sonny Berry
    Sonny Berry Jan 26, 2008

    That is usually a symptom of a defective flyback or horizontal deflection component failure. This usually is around 100 to 150 in repair cost, However that depends where you have it serviced. You may wish to call and explain your symptoms most reputable shops will recognize the problem and give you a ball park estimate. Hope this helps.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV won't power on


Could be an open internal fuse or power supply failure

Jan 03, 2017 | Philips Televison & Video

1 Answer

My tv wont turn on when i press the power button on the tv ?


Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit.Contact any service technician.If you wish to get some details; check the site linked here.Surf the site with patience.Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis.

Aug 03, 2014 | Philips Televison & Video

1 Answer

My phylips tv screen is zoomed after some time now it is not showing pitcher and turn of


The main digital processor board has the fault. In rare occasions, a software update might make this right. Contact the nearest authorized service center for Philips. Check this link too.

Sep 29, 2012 | Philips 6000 Series 32PFL6606 32-inch...

1 Answer

Can't find install code for philips magnavox smart series plus


Universal remote codes for Philips Magnavox TV are: 0062 0204 0207 0183 0226 0288
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand

Sep 27, 2012 | Philips Smart Plus TP3285C 32" TV

1 Answer

My phillips 60 inch tv 60pl9200d/37 wont turn on the power button flashes blue


Look in the manual. (Page 4)

Turn the TV on From main supply: Ensure that the main supply is turned on. A blue indicator light on the front of the TV lights up. When the TV is turned on by the main supply, the blue indicator light will blink for 45 seconds. This is the lamp's start-up period. When the light goes off, press the POWER button on the remote control or power switch. Press POWER to turn on the TV.

http://www.retrevo.com/support/Philips-60PL9200D-TVs-manual/id/633ag423/t/2/

Telephone number Philips Customer Care Center: 1-888-PHILIPS (744-5477)

Aug 14, 2011 | Philips 60PL9200D Projection Televisions

1 Answer

Tv won't turn on at all


no remote but tv was working with front power key? unplug from ac outlet and plug back and listen for any type of indication (noise or chirp) that something energizes inside if theres nothing then suspect a power supply problem, main fuse blown, shorted low volt rectifiers other components could be at fault.

Aug 05, 2009 | Panasonic CT-32SL13 32" TV

1 Answer

Beeping noise when I turn on my TV



www.TvRepairKits.com just added a kit for the "chirping set" problem. 

Hope this helps,

Dec 03, 2008 | Philips 46PP9302 46" Rear Projection...

8 Answers

Model F27650 RCA Entertainment Series


I have a RCA Entertainment Series 32' Model Number F32650Y01E024C226E just stopped working. no picture, just a chirping loud noise that came from the back of the tv.
Any suggestions?

Jan 06, 2008 | RCA 32F531T 32" TV

2 Answers

F32650 Chirping No Power On


Replace IHVT aka flyback xformer part #257805.

Nov 30, 2006 | RCA F32650 32" TV

1 Answer

No pic/sound


If you dont here anything then it sounds like the switching power supply or the horizontal output circuits not starting up. this requires troubleshooting with a variac, as well as maybe a scope. If your not trained to work on HI Voltage circuits you should seek assistance with this repair. Theres HI voltage inside these sets even after they are unplugged for a while. sorry i couldnt be of more assistance.

Jun 25, 2006 | Philips Magnavox MS3252S 32" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

828 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75169 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5340 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...