Question about Computers & Internet

3 Answers

Trying to install wireless g starter kit DKT-110 using cd rom. keeps telling me internet cable not connected when it is.

Posted by on

Ad

3 Answers

Hi -
Do you have a router for your system? You have to hook up things in a certain order.
Here is a link for a video that will show you all the parts and how they should be hooked up. It is very easy to get one thing connected in the wrong way.
http://tinyurl.com/39u2of

Posted on Jan 27, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Check that you have connected your wireless modem as instructed before installing via CD.

ie: The ethernet should connect to your PC, your ISP cable to your WAN or Phone cable to the WAN if you are using ASDL.



Then use the Starter Kit CD.

Posted on Jan 26, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 196 Answers

You may have more than one connection. like a 1394 connection.
Look in network settings for multiple connections.

Posted on Jan 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How much to buy one


USB Kit DIR-300 Broadband Router & DWA-110 USB Adapter DKT-USBG - D-LINK WIRELESS G ROUTER & USB KIT $94

D-Link DIR-300 Wireless G 54MBPS Broadband Router, with 4-Port 10/100MBPS Swich $63

Oct 25, 2010 | D-Link DIR-300 Wireless Router

1 Answer

We bought the AT&T Motorola DSL Modem today, and we're trying to connect to wireless on a laptop and the connection isn't showing up. How do we fix this ?


  1. Ensure that your AT&T DSL self-installation kit is complete. At minimum, it should contain a DSL modem, an AC adapter, an Ethernet cable, a telephone cable, several telephone filters and an installation CD.
  2. Install the telephone filters on each telephone jack that you have a phone plugged into. Install a dual phone adapter on the jack closest to your computer if you have an answering or fax machine, telephone or analog modem in the same room. Then plug your telephone equipment into the filters. Connect the telephone cable that was provided with your installation kit into an unfiltered telephone jack.
  3. Insert the installation CD into your CD-ROM drive. If the installation program does not start automatically, click Start > Run > and browse to the CD-ROM drive directory to find the installation file.
  4. Connect the telephone cable that is attached to the unfiltered wall jack to the back of the DSL modem. Connect the Ethernet cable to the back of the modem and to the Ethernet network interface card port on the back of your computer. Connect the AC adapter to the back of the modem and plug it into an electrical outlet. Power the modem on.
  5. Check the modem lights. There should be at least two lights lit. These will have labels such as "Power" and "Ethernet." However, these labels may differ depending on the model of modem you received in your installation kit.
  6. Complete the software installation. Enter your chosen username and password when prompted. Check your modem to see if the light labeled "DSL" or "Internet" is lit. Open a web browser window to see if your DSL service has been successfully installed.

Oct 25, 2010 | AT&T High Speed DSL Modem

1 Answer

My dsl light keeps blinking and I can't get on the internet because it won't stop blinking


  1. Step 1 Ensure that your AT&Tmag-glass_10x10.gifDSL self-installation kit is complete. At minimum, it should contain aDSL modem, an AC adapter, an Ethernet cable, a telephone cable, severaltelephone filters and an installation CD.
  2. Step 2 Installthe telephone filters on each telephone jack that you have a phoneplugged into. Install a dual phone adapter on the jack closest to yourcomputer if you have an answering or fax machine, telephone or analogmodem in the same room. Then plug your telephone equipment into thefilters. Connect the telephone cable that was provided with yourinstallation kit into an unfiltered telephone jack.
  3. Step 3 Insertthe installation CD into your CD-ROM drive. If the installation programdoes not start automatically, click Start > Run > and browse tothe CD-ROM drive directory to find the installation file.
  4. Step 4 Connectthe telephone cable that is attached to the unfiltered wall jack to theback of the DSL modem. Connect the Ethernet cable to the back of themodem and to the Ethernet network interface card port on the back ofyour computer. Connect the AC adapter to the back of the modem and plugit into an electrical outlet. Power the modem on.
  5. Step 5 Checkthe modem lights. There should be at least two lights lit. These willhave labels such as "Power" and "Ethernet." However, these labels maydiffer depending on the model of modem you received in yourinstallation kit.
  6. Step 6 Completethe software installation. Enter your chosen username and password whenprompted. Check your modem to see if the light labeled "DSL" or"Internet" is lit. Open a web browser window to see if your DSL servicehas been successfully installed.


Jul 06, 2010 | AT&T High Speed DSL Modem

1 Answer

I only got my DKT-810 ALL-IN-ONE ADL2+STARTER KIT 2DAY THE CD WILL NOT RUN IN DRIVER AT ALL SO I CANT DOWNLOAD IS THERE ANOTHER WAY I CAN DOWNLOAD SOFTWARE SO IT WILL WORK.


You don't need the CD nor software to setup the router. It can work without the disc. Simply hook it up do a power cycle. Make sure the physical connection is correct.

Jun 29, 2009 | Gateway Wireless-B Router (wbr-100)

2 Answers

I've just purchased DKT-110 wireless G starter kit.


The Internet/WAN port on the router should be connected to your cable modem's internet port.
Then on your laptop, you should click on "View available wirless networks", your Router should show up there. click connect and you should be able to surf.
Note::The USB DWA 111 should be connected to your laptop and the drivers installed

Please remember to rate all users who assist you for free :)




I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Sep 30, 2008 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

I cannot connect wirelessy to internet on my compaq pressario v6000. The orange wireless light is on and the internet connectivity icons in the task bar have a red cross on them. I have tried all options...


Part 1: Before You Start loadTOCNode(2, 'summary'); You need the following: • A broadband connection to the Internet and the appropriate hardware. For example, cable-based Internet access that uses a cable modem that is provided by your ISP. • The Microsoft Broadband Networking Setup CD-ROM. • The Microsoft MN-500 Wireless Base Station. • The Ethernet cable that came with your base station. • The AC power supply. • The blank floppy disk.Check the following: • On computers that are running Microsoft Windows 2000 or Microsoft Windows XP, you must be a member of the Administrators group to set up a network. If you cannot run Setup, click Log Off on the Start menu, press CTRL+ALT+DELETE, and then log on with as an administrator. • Turn off any firewall or Internet connection sharing software on your computers. Your base station replaces these functions. The Setup Wizard cannot continue if they are enabled. • Do you have a Point-to-Point Protocol over Ethernet (PPPoE) Internet connection or a static Internet Protocol (IP) address? The Setup Wizard prompts you to type your user name, password, and service name for a PPPoE connection. For a static IP address, you must have the IP, subnet, and ISP gateway addresses. If you have one of these types of connections, gather this information from your ISP.
Part 2: Install the Software and Connect the Hardware loadTOCNode(2, 'summary'); 1. Insert the wireless base station Setup CD-ROM into the CD-ROM drive. If the Setup Wizard does not start automatically, click Start, click My Computer, double-click the CD-ROM icon, and then double-click Setup or Setup.exe. 2. Follow the on-screen instructions to install the software. 3. In the second part of the installation, select the option to set up the wireless base station, and then continue through the rest of the Setup Wizard. 4. When the Setup Wizard instructs you to connect your wireless base station, position the wireless base station close to your modem and computer, and near the center of your intended network area. If you want to set up the wireless base station vertically, attach the included stand. 5. On the back of your computer, unplug the Ethernet cable that connects your computer to your broadband modem. Leave the other end of the cable plugged in to the modem. 6. Plug the cable in to the "To Modem" port on the back of the base station. The base station is now connected to your modem. 7. Plug one end of the blue Ethernet cable that came with your base station in to the Ethernet port that is labeled 1 on the back of the base station. Plug the other end into the Ethernet port on the back of your computer. This is the same port from which you just disconnected the modem cable.

Important The modem must use its original Ethernet cable or one of the same type to connect to the base station. 8. Plug one end of the power supply that came with your base station into the power jack on the back of the base station. Plug the other end into an electrical outlet. The power indicator light on the front of the base station should turn on. 9. Return to the Setup Wizard, click Next, and then go to Part 3 of this article.
Part 3: Configure the Base Station and Network Settings loadTOCNode(2, 'summary'); Continue to follow the instructions on the screen to configure your wireless network settings: 1. Setup prompts you to enable wireless security (WEP). Microsoft recommends that you enable WEP. 2. Setup prompts you to save your network settings to a floppy disk for use in later installations. A blank floppy disk is provided for this purpose. If you do not save to a disk, you receive a list of network settings to print or write down. 3. Click Finish to exit Setup, and then remove the Setup CD-ROM from the CD-ROM drive and the floppy disk from the floppy disk drive. You can use the same CD-ROM and floppy disk to set up additional computers on your network.
Part 4: Test Your Network loadTOCNode(2, 'summary'); 1. View the status of your network in the Broadband Network Utility (BNU). Make sure that you can see your base station and the computer that is connected to it in the BNU status screen: a. Click Start, point to All Programs, and then double-click Microsoft Broadband Network Utility. b. View the information on the Network Status screen. 2. If your broadband Internet connection is being shared through your wireless network, start your Web browser program, and then try to visit a Web site. If your network is working properly, you have access to the Internet from the computer you just set up.

Aug 21, 2008 | Computers & Internet

1 Answer

Wireless router g- starter kit


Could you elaborate a little more??

Jun 14, 2008 | D-Link Computers & Internet

1 Answer

D-link router DKT-710 Wireless G ADSL2+ starter kit


Took it back to shop and changed it for another one. thanks, norman3.

Mar 02, 2008 | Computers & Internet

4 Answers

Dlink dkt-110 wireless router


All right, according to your question, i'll asssume your pc running with win xp..first connect the wireless card to the computer and restart it, the card should be detected, you should get a found new hardware screen then insert the cd and continue installation..if you do not get the screen check in a diff pc if you stillk do not get the message.. the problem is with the pc card or else with the pc where you are trying to install the card/..

Dec 04, 2007 | D-Link RangeBooster G WBR-2310 Wireless...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...