- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
press your code search button until it blinks red light then press vcr button make sure vcr is turned on. After pressing vcr button press power button on remote repeatedly until power on vcr turns off then press enter on remote should be set for you
The MX-500 has a learning mode that you can use. Press MAIN and ENT together for 3 seconds, then press the P-PRO button. Select the device then button you wish to program on your remote and then with both remotes facing each other (IR ports must be able to communicate) press the button on your other remote.
i lost my book too but got told you can press set button and the on that has tv on it hold them down till the red light stays on then press after the power button on remote and hold down till tele turns of they all have auto scan on them incase there aint a code takes a bit longer but works for me. hope this helps
I had the same problem with my REM340 remote trying to program an older Zenith TV. Here is what I found and it worked pretty quickly.
Turn your TV on.
Press and hold the SET button until the light stays on.
Then press the TV button.
Then press the VOL+ button until your TV turns off.
Once your TV turns off, press the SET button again.
Hopefully you can now turn your TV back on and everything will work. Good luck. I know the frustration.