I have bought a Humax digital recorder and

Have you tried pointing the remote at a digital camera? This will show the infra-red signal coming from the remote. If the remote is OK, it may have been set to an alternative mode.

See: https://hummy.tv/forum/threads/using-more-than-1-humax-box-in-the-same-room.24/

Having looked at the manual it doesn't look like there is any option to change it to that. It will simply list them in the order they were recorded. With the last first.

I would say that the infrared receiver in the TV is defective.

Press the STB button in order to control the Humax.

To select a programme to record, press the OK button, it will then give you options such as HD or SD, One-off or Series.

Hi,

You didn't fully expain how each device is connected to the others. I don't think you have this set up correctly. Your DVD cannot record in HD so there is no point sending an HD signal to it - it can't process it. This is how I would set it up:

1. Install a 2-way splitter on the input cable
2. Connect output 1 from the splitter to the Humax receiver
3. Connect the Humax receiver to the TV with an HDMI cable
4. Connect output 2 from the splitter to the DVD
5. Connect the DVD to the TV with SCART cable.

This will enable you to watch HDTV via the digital receiver and also provide an input from source (dish/cable) to your DVD player so that you can record.

If you've already set it up this way then it should work. I suspect you've connected the Humax to the DVD and TV and also the DVD to the TV.

Please try this setup and post back if you need further assistance.

You can download Onkyo universal remote codes with instructions here.

I hope that helps.

Try Turning Subtitle Option Off Before Recoding.

Humax are having problems and are starting to send out software upgrades (night-time updates) - seems to be related to the new formats on the MUXs for the digital switch-over. Our 9150T hasn't been fixed yet but due any day (I hope)