Question about Projection Televisions

2 Answers

Need remote control code for 32" X2GEN tv

I just bought a new 32 inch X2GEN flat screen tv. Model # MV32R. I need the remote control code for this to connect it to my direct tv remote. Please help!

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: need remote control code for 32" X2GEN tv

Good luck. I have the same issue. No codes are available for the X2Gen. To make matters worse, it appears to use a non-standard frequency for the carrier signal, maening that other remotes won't work with the TV.

I purchased a learning remote, thinking I would just "teach" it the codes directly from the X2Gen TV remote. This didn't work either.

There appears to be no way to use any remote other than the one supplied with the TV. Whatever you do, don't lose it!

Posted on Feb 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Projection T... Master
  • 8,617 Answers
Re: need remote control code for 32" X2GEN tv

Heres a link to the page to explain how to program your direct TV remot. Just enter which brand Direct TV remote you have. Hope this helps.

Posted on Jan 25, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My tv is locked and asking for a an unlock code. I have never had a lock code on the tv since i bought it several years ago. How can I reset or bypass this feature. BTW mt TV is a 48-50" projection...

I thinks that you have its original remote handset with you now, and posts this solution. If you don't have it, either buy a new original remote handset or try to get it from any of your friends and relatives, who owns the same model of Mitsubishi Tv, you have now; only to unlock it. After unlock, you can use any other remote control.
Mitsubishi sets use a four-digit code for a V-Chip locked program, view a locked TV, cancel the lock, or to enter the V-Chip lock menus. You can view the locked shows on the TV set by pressing the number 9 and QV buttons on the remote at the same time, whenever your code is requested. This process temporarily unlocks the TV and asks you to enter a new code.

Sep 15, 2011 | Mitsubishi WS-55511 55" Rear Projection...

2 Answers

What is the setup code for a Sylvania TV with Model Number RLC372AK01 and Serial Number 25014897? I need it to program a new remote control I recently purchased. None of the codes listed for Sylvania TVs...

The setup code may be different for each brand of remote, so a code for the TV will not help. You need to follow the instructions for the remote you bought to scan through all codes until you find one that works. Generally this is done by entering the programming mode and using the ch-up or ch-down buttons to scroll through the codes then use the power putton to see if it turns your set off. When you find the right one you press the button to 'store' it.
Your remote instruction booklet should step you through the process. If it does not have instructions for scanning all codes let us know the Brand and Model of the Remote you bought and we may be able to find the instructions.

Apr 16, 2008 | Projection Televisions

1 Answer

I need a new remote for my hisense 32 inch flat screen what store or how may I get one

May I suggest instead buying a universal remote? Number one, it'll probably be much cheaper than your original remote. Number two, it can control multiple devices (vcr, dvd, stereo, satellite, cable box, etc.).
Instructions and codes come with a new remote.

Hope this helps.

Dec 14, 2009 | Projection Televisions

2 Answers

I need to make the picture smaller to fit the screen. do not have original remote.

Tries this website for a new remote 1-800-Remotes Factory original for new remote or tries the manual controls on the tv for functions to ajust the screeen sizes.

Oct 31, 2009 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

Need code for rca universal remote i have insignia 40 inch lcd flat screen tv model #NS-LCD40HD-09

I found this site:

which lists the universal remote RCA (model RCU807) code as 135

I just bought one of these TV's last night.

Good luck.

Sep 05, 2008 | Projection Televisions

7 Answers

Living solutions remote control codes

I have a Universal Remote Control Model ATC-1311 Giant remote. I have lost the codes to and instuction book to. Can you tell me where to get at least the code for my T>V> Thank you

Mar 29, 2008 | Projection Televisions

1 Answer

32 flat screen problem with remote and menu

Sounds like you need to get a Green Setup remote but if you are using this privately you will not be able to obtain one to program the tv. They are only available to hotels since the tv's are for commercial use.

Mar 18, 2008 | Philips Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

904 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers


Level 3 Expert

57068 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides