Question about Hotpoint Aquarius WF000 Front Load Washer

2 Answers

Flashing power light and rinse hold light

The machine starts for a few seconds then stops then the rinse hold and power light start to flash, can anyone help please???

Posted by on

  • Anonymous Mar 12, 2014

    Hi, I have an Aquarius WT 540 washing machine and there is flashing lights on the machine. The power on/off light flashes quite rapid and the rinse hold and mini load lights flash steadly.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,294 Answers

Check your exit hose spigot, it may be clogged. This is if your filter is all clean. There should be air for passage in the standpipe behind. Your hose should not fit airtight into the standpipe and neither too deep into it. Snaking out your standpipe would be good too.

Rate me pl.....if helped.

Posted on Jan 26, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This is not exactly the same light sequence,but if the crease guard light and the on/off light are flashing ,check the drain pump as I solved the problem by removing an underwire bra wire from the pump.

Posted on Jan 26, 2008

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why my washing machine will start the wash cycle but will not spin or rinse?


the drain pump is probably blocked or overheating, when it starts beeping which lights are flashing reading from right to left e.g. 1,3,5 also what is the model number?

Aug 17, 2014 | Fisher and Paykel Washing Machines

1 Answer

Code in digital display does not have a E in front of it


Please let me know if you can get a number after this - if so what number shows up?


Model differences:
• Better models have a digital readout display
• Good models do not have a digital readout display
In the Better Models line, the failure codes will appear in the display as an E followed by two numbers, a number and a letter
or two letters. The control will beep and the Door Lock, Wash, Rinse, Final Spin and Control indicator lights will flash.
Example: E14. To stop the flashing and beeping, the customer may touch the Pause Cancel button. The error code remains
stored in the control but once the problem is corrected, it does not effect the operation of the washer. If the failure is something
that the customer can correct (such as the water faucets being turned off), the washer will operate normally the next time it is
started.
In the Good Models line, the control signals the failure code by flashing the five indicator lights of Door Lock, Wash, Rinse,
Final Spin and Control for the first number or letter after the E and the Start indicator light for the second number or letter
after the E. When a failure occurs, the washer stops or pauses and the control beeps and flashes the five indicator lights to tell
the customer that a failure has occurred. To stop the flashing and beeping, the customer may touch the Pause Cancel button.
The error code remains stored in the control but once the problem is corrected, it does not effect the operation of the washer.
If the failure is something that the customer can correct (such as the water faucets being turned off), the washer will operate
normally the next time it is started.
To recall an error code,
• Wake the machine by pressing any button
• Wait 5 seconds
• Press and hold the Start and Pause Cancel buttons simultaneously
• All LEDs will go blank and after a few seconds the control will signal the stored code using audible beeps and blinking
LEDs. The control will repeatedly signal the code, as long as the Start and Pause Cancel buttons are pressed.
A two-second pause between repeats affords you the ability to make accurate counts to identify the correct error codes.
Please Note the following...... on a small number of washers with serial number prefix XC4,
if the previous procedure does not perform as specified, follow the option below:
• Follow all previous steps but instead of pressing Start and Pause Cancel buttons,
press and hold Options and Pause Cancel buttons.
If the washer is a Better Model, the error code will appear in the display. Troubleshoot problem by using charts on the
following pages.
If the washer is a Good Model, the five indicator lights of Door Lock, Wash, Rinse, Final Spin and Control will flash the
number of times for the first digit of the code and the Start indicator light will flash the number of times for the second digit.
Take
separate counts of each indicator light, then repeat to confirm in order to be accurate in identifying the proper error code.
The code is obtained by counting the number of times the lights flash. Example E24: The five indicator lights would flash twice
indicating the 2 and the START indicator light will flash four times indicating the 4. The five indicator lights and the START
indicator light start flashing at the same time.
The control will pause for 2 seconds, then repeat the code as long as the two buttons are pressed and held.
Note: A letter appearing in the code stands for a number higher than nine:
A = 10 B = 11 C = 12 D = 13 E = 14 F = 15
Example Code F1: the first digit would be 15 and the second digit would be 1. If this code would appear on a washer in the
Good model line, the five indicator lights would blink fifteen times and the START indicator light would blink once.

May 13, 2014 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Hoover HNL 662. 'Delay start' light comes on and stops machine


my hoover nextra hnl 662 want wash or spin and the delay staart light flashes 5 times please help iv only had the machine a year and had nothing but trouble with it wouldnt recomend one of these washing machines to anyone jakki

Feb 16, 2010 | Hoover Nextra HNL 3166 Z Front Load Washer

1 Answer

We had a power cut when the machine was on and now the on button flashes on and off but does not do anything also the crease and rinse hold buttons flash


Try switching it off, leave for a few seconds, and then switch on again, press start and cancel button if it has one, and hold for 3 seconds, then try a programme again.
This may work, but as you did not state the model number , the sequence can differ from model to model.
Hope this helps.

Jan 30, 2010 | Hotpoint Washing Machines

2 Answers

Whirlpool AWM8121-The Rinse and Door open light blinks constantly


This error code means there is an abnormality.
If the on-off door lock LED on a Whirlpool washer flashes rapidly at the same time as at least one other LED, then this means there is an abnormality.
Try first to reset the machine. You can press and hold the reset button for a couple of seconds, otherwise turn off the power completely (unplug it) for 5 mins.


reset-whirlpool-awm8121-4xbpm0x4xarp04nz1sgqugzl-2-0.jpg

Mar 01, 2018 | Whirlpool AWM8123 Front Load Washer

1 Answer

Machine fills and drains at the same time.


Check the height of the drain hose and make sure the drain hose is higher than 30 inches from the ground. If your drain hose drains into the floor you may need to purchase a siphon break to stop the problem

Apr 01, 2009 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

We have a hotpoint washer dryer wd420 when the cycle starts after a few seconds the on/off button and the rinse hold lights flash and the machine stops. most components have been checked but cant find the...


no sorry the problem hasnt been sorted as yet thats the reason we contacted you, i do not wish to purchase anything just thought you could be of some help.

Sep 14, 2008 | Washing Machines

4 Answers

HOTPOINT AQUARIUS WF 250 ON/OFF LIGHTS FLASHING


The lights are set off by the balance sensors.And if your balance sensors are  stopping    it from spinning than you first have to make sure the washer is level.You  could have bad Shocks and a bad electronic control board,.                                    

May 05, 2008 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Lights flashing but machine not working


hi there i would check the connections to the heater and ntc both can be found behind the lower inspection cover at the rear, UNPLUG FROM MAINS FIRST AS LIVE PARTS EXPOSSED BEHIND!!!

Feb 08, 2008 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Zanussi FJ1254 W - Machine does not fill


Yes if you remove your soap draw and take a look inside you will see that there is all residue built on the top part of the internal draw, Either you can jet wash it off or replace the soap draw,,

this should solve your problem.. if that does not work then one of your solinoid valves at the back is faulty...

Dec 01, 2007 | Zanussi WJS1265W Front Load Washer/Dryer

Not finding what you are looking for?
Hotpoint Aquarius WF000 Front Load Washer Logo

523 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

1234 Answers

Eric Taylor

Level 3 Expert

590 Answers

James Hehling
James Hehling

Level 1 Expert

14 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...