Question about SVP DC-12V Digital Camera

2 Answers

DRIVERS - for SVP Digital Camera dc-12v

I received this camera a few days ago, and I keep getting an installation error when trying to download the driver. I tried downloading from a thread in someone's message and it still comes up with the error message to be forwarded to windows.

I've uninstalled and reinstalled this product several times. STill to no avail can I get a driver.

I cannot download pictures from this camera as well, the computer is not recognizing the camera.

I can't used it as a webcam either.

Posted by on

  • 1 more comment 
  • Patien Jan 24, 2008

    this is what it is saying when I try to download the driver from the installation disc.



    mfc_setup MFC Application has encountered a problem and needs to close. We are sorry for the inconvience.



    Please tell Microsoft about this problem



    Send error report.

    -----------------------------------------



    It doesn't work as a webcam either



    Neither does my computer recognize it.

  • Patien Jan 24, 2008

    Was able to down load the driver. Now the computer is not detecting the USB connection....and now the camera doesn't show under MY COMPUTER, and saying it's not detecting the device

  • Anonymous Aug 19, 2008

    i have also installed the disk and every ting downloded, but when i plug in the camera it does nothing not sure what the problem is but would like an answer to the problem. thanks for your time in this matter.

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 226 Answers

Download your driver here: http://www.svp-tech.com/download.htm

Posted on Jan 24, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

You shouldn't need the driver - Turn the camera on, Push the menu button - click right for "setup"
you will see animation, beep, fequency, format, default , etc.... scroll down to USBMODE and click ok. Then plug it into your usb that should already be plugged into your omputer. A screen will pop up asking what you want to do open folder with pictures in it, etc.... if this doesn't work E-mail me and I'll send you Coach Drivers that will work. Put the camera in usbmode though and it will work. I had the same problem.

Posted on Oct 07, 2008

  • Ralpg Furgason
    Ralpg Furgason Sep 17, 2014

    I followed your directions, found all you stated, but no USBMODE

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why do I keep getting a "windows XP required" message?


Your application is not compatible with Windows /. Try to install and run it in Windows XP cpmpatibility mode.
Right click on Setup . Pprperties - Cpmatiblity
Select Reun on Windows XP Compatiblity mode

May 28, 2015 | Fuji FinePix S5000 Digital Camera

1 Answer

Hi there a few days ago my webcam on R780 just stop working and I dont know why ? turn on laptop then want to have video call but CyberLink send me message that not found device. is there any...


Could be a possibility that the drivers for the web cam got corrupted in the last few days. You may either try to install the drivers for the camera again by downloading the drivers from the manufacturer's website or you may restore the computer back to a state when everything was working fine.

Feb 27, 2011 | Samsung Computers & Internet

1 Answer

I have taken a new G460, 2 days back I have put Windows 7 , 32 bit version. I have install the driver CD but camera is not working.When I click on the shortcut 4 camera it gives error turn on the camera....


Hi gulchan2002,

Based on your concern, I suggest trying the following steps:

1. Download the camera driver here:

2. After downloading, install the camera driver then restart your computer.

3. Log back in then press the FN+ESC to enable the camera.

4. If you still cant open the camera try installing the lenovo power management to activate the function key.
--> you can download it here:

5. After downloading, install the application then restart your computer. Try step 3 again.

If still experiencing the same concern, , I recommend to contact the technical support of Lenovo. They will set up a depot repair for you to diagnose the computer and to repair it completely. You may contact them at this number 1-877-4Lenovo (1-877-453-6686).
--> Hours of operation, 24 hours a day 7 days a week.

Hope it helps,

Thank you for using FixYa.

Nov 17, 2010 | IBM LENOVO VIDEO ADAPTER-G450 32MB 22P6640...

2 Answers

Error 0x800736B3 when installing what is this?


If installing Vista SP1 and getting the error, it is suggested that you update the BIOS, video driver, Sound driver, disable AV and malware scaners and try again with the update
http://www.vistax64.com/vista-installation-setup/115343-vista-sp1-failed-installation.html

Feb 20, 2010 | Dell Dimension 2400 PC Desktop

1 Answer

Canon Elph Sd1200 Communication Error


This question comes up several times a day here in the camera section at Fixya. But please note, it's very hard to troubleshoot individual software problems online, and it likely is a software issue. But why put up with the headaches of bad software in the first place?

Please don't take this as a sales pitch as it's not, but please see the following blog article, as it describes the use of an inexpensive card reader as a much easier, faster, and less error prone way to download your photos. In fact there are several important reasons discussed in the article for using a card reader vice downloading from the camera. USB Card readers are also very inexpensive these day, with cost virtually not an issue:
http://camerarepair.blogspot.com/2009/01/how-do-i-download-photos-or-pictures.html

Jun 30, 2009 | Canon Cameras

1 Answer

Error message when I try to download photos to my laptop


Did you install the drivers from the CD which came with your camera???. The drivers must be installed, before you can connect your camera to your laptop. If not follow these steps in sequence

1- Use the CD to install the drivers. If you do not have the CD, please go to fuji web site and download it. Here is the link

http://www.fujifilm.com/products/digital/download/01/index.html

2- After installing the drivers, connect your camera to your laptop, turn it on and follow the screen to install the drivers.

3- After it is finished (ready) , click on start, then computer. If the drivers was installed correctely, you would see an icon with all or part of fuji Finepix s9000. Double click on that icon.

4- You would see one or more folders, which contain all of the pictures and/or videos stored in your camera.

Now you could download, copy, delete etc all of your stored pictures.

GOOD LUCK!!!!!!!!!!

Jun 15, 2009 | Fuji Finepix S9600 Digital Camera

1 Answer

Device driver will not install; error msg "Access Denied"


Ok so i was searching around the internet and found a similar problem with another monitor so for giggles i tried there method. This is the website where i found it : http://social.technet.microsoft.com/forums/en-US/itprovistahardware/thread/d7c0e5bd-2fcf-48ff-a79b-c157014fc821/#page:3

The Second Entry has a download. Download it then extract the files to the desktop. Dont worry if you get errors when the program runs it will fix them, if they come up just press enter to keep going. Once the program completes install the driver again and it should work as it did for me.

If you cant get to that website heres the post from it:
"Ok, once again i checked updates for HP My Display/Drivers, and found this:
http://www.portrait.com/dtune/hpw/enu/support_help.html

Here is a direct link to fix for "Access Denied" issue (HP LCD Monitors & Vista):
http://download.portrait.com/DRVFix.zip

Download DRVFix.zip. The fix contains 3 files including this readme. All must be in to the same folder.
  • readme.txt - This file
  • RestoreDisp.exe - Executable required to restore permissions. DO NOT RUN THIS FILE
  • DVRFIX.exe - Run this file in Administrator mode after reading the instructions completely
To perform the fix do the following:
  1. Extract all files in to a folder on your desktop
  2. Open the folder, right click on the DVRFIX.exe file and choose "Run As Administrator"
  3. Follow the on screen instructions. When complete, you should be able to install your drivers

If you find this helpful, please let me know.

I fixed this issue manually (from registry), about month ago.
But gladly i found this help file, by mistake. emotion-1.gif

Regards
Vesa"

There you Go, KD0BGA

Apr 18, 2009 | HP w1907 LCD Monitor

1 Answer

9300 aspire notebook webcam not working


hi there, i had the same problem back a few month ago. the solution for me was, i twisted the built-in camera 180 degree a few times, after that, i heard sound indicating my system found a new hardware and it started to install them, which in my case, the webcam ^_^
maybe the connection is the problem, mine is acer aspire 5580 laptop.. hope this help

Oct 29, 2008 | Acer Aspire 9300 Notebook

2 Answers

Vivitar 3188 Digital Camera - Lost CD for driver


Hello again, I figured it out. Sorry! I looked around and found a driver (or program or something) called STK014, downloaded it with little hope. Installed it and success! The camera connects now. Thanks anyway

Apr 19, 2008 | Cameras

1 Answer

Download pics


You may need to get the new WIA (Windows Image Acquisition) drivers. When you connect a digital camera to any laptop that runs WinXP, the OSmay not recognize the camera. If you download and install new drivers from the Web site, you receive the following error message when WinXP tries to detect the camera: "Windows image acquisition service error system cannot find file specified ‘imaging'." To fix this problem, you must first remove all current related camera drivers and reinstall the updated drivers.

Mar 24, 2008 | Fuji FinePix A345 Digital Camera

Not finding what you are looking for?
SVP DC-12V Digital Camera Logo

Related Topics:

1,530 people viewed this question

Ask a Question

Usually answered in minutes!

Top SVP Cameras Experts

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a SVP Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...