Question about Uniden WIN1200 IP Wireless Phone

1 Answer

Uniden Win 1200

I could not find a power button on my Uniden Win 1200. I called Customer Hotline to get help on how to turn the handset unit on, the automated answering machine at Uniden advice me to put Uniden handset unit back on its base, pick it up and press Up or Down volume twice. I did just and still nothing got turned on.

Please advice.
Thanks

Posted by on

  • dhun Apr 11, 2008

    Till today ,about three months from purchase , the phone is working nice.today when i was trying to reset the hand set and base unit ,the phone stopped working and all the time it shows ANAVAILABLE on hand set.Kindly note that i am using unit in INDIA.

  • shk_doc Dec 04, 2008

    I have the same problem . that handset is not turning on and charging light is blinking contionusly

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

I had the same problem, but good thing I bought three of them. The first one worked right out of the box, the second one wouldn't come up for about two days and the third one took several days before it would turn itself on. My opinion is that the batteries are really flat from being on the shelf for so long before they are sold and have "memorized" that condition.

I went to the Uniden site and their FAQ don't really address much about this product, wish they would expand it somewhat.

Good luck and keep on trying to charge the batteries.

Posted on Feb 02, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Uniden tech support


SORRY but FIXYA is not Uniden and we have no connection with them

Nov 15, 2017 | Lands Phones

1 Answer

I have Uniden DCX700 phone- how do I turn the ringer on and off?


The DCX700 is an expansion handset for several different Uniden phones (DCT746, DCT748). To change the volume of the ringer, press the Vol + or Vol - button with the unit in Standby (not making calls). There are three ringer volumes: Off, Low and High. Pressing the Volume buttons will let you cycle through the list. The volume buttons are to the left of Talk below the LCD screen.

You can temporarily mute the ringer by pressing Mute while the phone is ringing.

The manual for the DCT746 is here: http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/DCT746Mom.pdf . All Uniden cordless phone manuals are available in numerical and alphabetical order here: http://www.uniden.com/scat/cordlessphones_mnl . The manual for the DCX700 handset (with registration information) is here: http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/DCX700om.pdf .

I hope this helps.

Cindy Wells

Sep 21, 2011 | Uniden DCX700 2.4 GHz Cordless Phone

2 Answers

E4 - Erros My uniden phone model TRU 9485 - 4WX after outage power, now on LCD screen appear E4 and it didn't respond to any button when i press. I read some help which they say press 3 button...


Hello
Connect the phone line and power UP the base unit. Place the handset on base to get charged. It must reset automatically when you place the handset on base to charge. If not; resetting both handset and base unit is necessary.
Resetting the Handset

You may need to reset your handset in the following instances:

You lose a handset and purchase a new one. When you try and register to your existing base you get registration

failure.

You are unable to register any handsets to the base.

You had a base which needed to be exchanged by the manufacturer. When you register your existing handsets

to the base, the handsets say #3 and #4, but you only have 2 handsets.

When you are instructed to by the one of the manufacturer's call center representatives.

To reset, do the following:

Press and hold [ ] and [#] for more than 5 seconds. Select DEREGISTER HS.

WHICH HANDSET? appears. Select the handset that you want to de-register, and press the OK soft key.

DEREGISTER HS appears. Select YES, and press the OK soft key.

ARE YOU SURE? appears. Select YES, and press the OK soft key. You will hear a confirmation tone. The

handset will clear its registration information from the base, and then delete its own base information.

MODELS VARY! PLACE HANDSET ON THE BASE FOR REGISTRATION OR REFER TO OWNER'S MANUAL. To

re-register the handset to the base (see page 25).

If the handset cannot contact the base, it will display OUT OF RANGE. Make sure the handset is in range of the

base and the base is connected to power.

Note: It is also possible to reset the handset back to its original factory settings. All changes including Caller ID information

will be erased. For more information on resetting the handset back to factory settings and when you need to

do this, see www.uniden.com or call our Customer Service Hotline. See back cover page for contact information.

Resetting the Handset without the Base

If your original base is not available for some reason (for example, it is lost or somehow incapacitated), you can still

reset the handset and use it with another base.

Press and hold [ ] and [#] for more than 5 seconds.

Move the cursor to select BASE UNAVAILABLE and then press the OK soft key.

BASE UNAVAILABLE appears.

Move the cursor to select YES, and then press the OK soft key. ARE YOU SURE?

appears.

Move the cursor to select YES, and then press the OK soft key. You will hear a confirmation tone. The handset

will delete its own base information without trying to contact the base. When the base information is deleted,

the handset displays MODELS VARY! PLACE HANDSET ON THE BASE FOR REGISTRATION OR REFER
TO OWNER'S MANUAL. Register the handset to the new base (see page 25). of its user manaul.
OK.


Sep 12, 2011 | Uniden TRU9485 Cordless Phone

2 Answers

HAND SETTING AND ACTIVATE GPRS OF SAMSUNG GT-S5670 where did i cal to install configuration to activate my internet i use sun


Hello,
You will get your gprs setting in the link below.
( when you get to that page they are in the top left corner of the screen )

http://uk.samsungmobile.com/supports/sup...

Regards

Jul 05, 2011 | Samsung GTC3300 Cell Phone

2 Answers

Cannot get on/off button on my DECT 1580 Series phone to work. Pushing button always turns to "off".


Hi,i think the problem is from the power button sensor located on the power baord of your phone,it has to be fixed or replaced,i have experienced such problem before.
You have to seek the assistance of a qualified phone engineer in you area to fix the power button sensor,because this is a hardware problem that requires adequate technique and expertise.
Note:please don't try to do this youself in order for you not to compound the problem.

Apr 01, 2010 | Uniden Cell Phones

1 Answer

Uniden 5.8ghz cordless W/2handsets has no dial tone cannot call out or recieve calls


There can be a lot of different things that could cause this. The first thing I would do is disconnect the telephone cord from the Uniden phon eand connect it to another telephone and see if you get a dial tone from it. If you do then we know that the telephon eline and the cord are OK so we go back to the Uniden telephone. Next, does the unit light up when you plug it in? are you sure that the telephone is getting AC Power? Are the displays on the handsets working? Does the handset display show "Handset XX" or does it show "Searching"? If it shows "Handset XX" then the base unit is getting power, if not the base unit may not be getting power.
If the base unit is getting power and the handsets are working and the power cord and jack were proven good by conecting another phone to them, then you would need to call uniden Customer Service for further trouble shooting or repair/replacement. the number is 1-800-297-1026

Jan 26, 2010 | Uniden Cordless Phone

1 Answer

No dial tone and base is constantly flashing red, I put the phone on the base to be charged and nothing is working. I turn it on but get no dial tone even though it says connecting. Constanly flashing red...


http://www.uniden.com/products/productdetail.cfm?product=ELBT595

Here is the link to the manual...

But have you tried:
1. charging the unit for 10 hours?
2. registering the handset?

Register expansion handsets to the main base
Before the expansion handset is registered, the battery pack MUST be charged for 10
hours
.
To register an ELX500 handset, simply place it in the main base.
To register a TCX860 handset, follow the steps below:
1) From the base, press menu/select and select S y s t e m
S e t u p menu.
2) Select R e g i s t e r H a n d s e t, and press menu/select.
3) On the handset, press and hold # until you hear a
beep.
While the handset is registering, H a n d s e t R e g i s t e r i n g will appear in the LCD. When
R e g i s t r a t i o n c o m p l e t e . is displayed, the handset has been registered to the base. If
R e g i s t r a t i o n f a i l e d . appears, please try these steps again.


Customer Hotline at 1-800-297-1023. (Mon - Fri 7 am to 7 pm,
Sat/Sun 9 am to 5 pm, CST. Phone support is closed on holidays.)


Jun 19, 2009 | Uniden 5.8GHz Expandable Cordless Phone...

1 Answer

ADDING ANOTHER PHONE


I read the manual and it does not appear that you can put and other DXAI-3288 with you set but, you can always add an other cordless phone to you system.

Here is the customer hotline number 1-800-297-1023

Here is the url for the manual
http://www.uniden.com/pdf/DXAI3288-2om.pdf

You have to have a pdf file reader you can get it at
http://get.adobe.com/reader/

Jun 07, 2008 | Uniden DXAI-3288/2 Cordless Phone

2 Answers

Uniden 5.8Ghz phone.


You need to reset the main base unit. Unplug the power from the back of the base. While the power is disconnected, press and hold the delete key while reconnecting the power. Wait for a long beep tone. When the display shows 88 or P, press play button one time. If you have a phone without an answering machine, disconnect the power from the back of the base, press and hold find hs button while reconnecting power.

Jan 20, 2008 | Uniden Cordless Phone

2 Answers

Handset doesnt work


Do you have another phone (cell phone) you can use to make a test call to yourself? If you can answer a call and the Uniden transmits voice OK, then it is probably the speaker and may just be a bad solder connection. If the handset does not transmit or receive I seriously doubt you have a bad microphone AND a bad speaker, you'd be looking at something more serious.

Jul 25, 2007 | Uniden EXS 2080 Cordless Phone (EXS2080)

Not finding what you are looking for?

Open Questions:

See all Uniden WIN1200 IP Wireless Phone Questions

Uniden WIN1200 IP Wireless Phone Logo

359 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Computers & Internet Experts

Marvin
Marvin

Level 3 Expert

82313 Answers

mark
mark

Level 2 Expert

128 Answers

Brad Brown

Level 3 Expert

17473 Answers

Are you an Uniden Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...