Question about Alcatel Newbridge MainStreet 3600 Multiplexer

1 Answer

Newbridge 3600 circuit signal fault

I am running a short hop from my NB 3600 at one substation to an NB 3630 at another less than 2 miles away. I am connected by T-Marc fiber boxes at both ends and have no perceivable problems there as my scada system is up and running. I am also trying to tie 2 phone/OPX lines to that same Sub from LGE to LGS both Loopstart as all my other sub lines are configured. Yet I can't get a dial tone at the 3630 end and have a signal fault on both circuits at the 3600 end. All nodes are RBSoff at the CPSS, DT1 signalling RBSon voice at both the phone lines. All levels are set at default. Attempts to find the answer in the manuals is no good. any help would be appreciated. Please email any answers to ronbehnken@fourcty.org. Thanks in advance for all your help

Posted by on

Ad

1 Answer

RBS is either all on or all off

Posted on Nov 02, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i configure x.21 circuit at 384kbp or above


Please let me know on what card you want to configure it for..X21DCC, RS442 or X21 DTU?

May 13, 2014 | Alcatel Newbridge MainStreet 3600...

1 Answer

Reset newbridge 3630 data node to default


To reset a 3630 you need to go to Maint and restore the database, it will ask you which database to restore just hit esc and it will reset the database

Dec 19, 2013 | Alcatel Newbridge MainStreet 3600...

1 Answer

What's your problem?i am facing oblem power alarm and i can not get dial ton on my newbridge 3600 can any body help me to resolve this problem how can i check that


Is this connection between a LGS and LGE card?? if so then the only problem can be on the configuration on the two cards, both needs to be configured for "RE" remote extention.

Regards
Len

Jun 23, 2012 | Alcatel Newbridge MainStreet 3600...

1 Answer

I dont have a problem. I just wanna know how Newbridge 3600 series multiplexer help me extend telephone lines to a remote areas like Oil & Gas Pump Stations. I have STM 64 mux used as a backbone. So...


Hi Berido, you can extend telephone lines over the 3600 by using LGE and LGS cards fitted with a ringer PSU in the 3600 at the end point, works well, for more info send me a mail, lenconradie@yahoo.com

Sep 08, 2011 | Alcatel Newbridge MainStreet 3600...

1 Answer

NewBridge 3600 Mainstreet


Hello

The pinout is determined by the serial port you are plugged into. Are you using serial port 1 or 2. This is pinout from a standard DB9 PC serial port should get you into SP1.

Blue-8
Orange-7
Black-2
Red-3
Green-5
Yellow-4
Brown-6
White-No Connect

Write back and let me know - BAD421

Aug 01, 2008 | Alcatel Newbridge MainStreet 3600...

2 Answers

Mainstreet 3600 cpss does not work


no tengo el manual en electronico por favor guiarme sobre el mismo en version español

Dec 13, 2007 | Alcatel Newbridge MainStreet 3600...

2 Answers

Alcatel Mainstreet 3600 Anphenol PINOUT


You must have a Dual E1 card that support a 120 ohm interface. There are cards for 75 and there are cards for 120 ohm. Sergio - Argentina

Apr 04, 2007 | Alcatel Newbridge MainStreet 3600...

Not finding what you are looking for?
Alcatel Newbridge MainStreet 3600 Multiplexer Logo

Related Topics:

1,057 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alcatel Computers & Internet Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14406 Answers

Are you an Alcatel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...