Question about Dishwashers

1 Answer

Integrated dishwasher DW009,

When I switch the dishwasher on, it beeps sounds as if it is tryong to empty water out and shows E4 code.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Contributor
  • 25 Answers
Re: Integrated dishwasher DW009,

If this is an asko dishwasher , most times this problem is caused by water getting into the base pan and setting off the float switch. Turn off the power and take the toe kick off, behind there is a pan runs under the motor and sump if there is water in it clean it out. that will take care of the problem. but you will need to watch and see if you can tell where the water came from sometimes on those unit its just from too much detergent

Posted on Jan 25, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do I fix my dishwasher it is Glem and is showing E4

I found this. All the errors are generic to all models

Hi I'm a kenwood engineer
E4 means that the flood sensor located in the sump of the machine has got wet!
It only should get wet if the machine is leaking somewhere.
The sensor is designed to switch off the machine if triggered... To save flooding your kitchen!
Very good idea really - as most machines don't have this feature and flood the floor until the cycle is finished.
Yes you need to tilt the machine back to drain the water from the sump first.... Then look for your leak. The leak cud be on any hose or water pump... Or the seal under the filter chamber. Once leak fixed and water drained/dry
E4 should clear. Make sure machine is empty and unplugged before messing! :)

and can also be drain error

There is also a video on E4 errors.

Jul 05, 2016 | Dishwashers

1 Answer

DISHWASHER- Model no: DW009

Hi i know you give the model number but what make is it i will find out what the fault code is for you then i can advise you on the best way of solving the problem tell me your make and model number and ill try my best to help you ok speak soon

Nov 29, 2007 | Dishwashers

1 Answer

Hi i just bought Electrolux Dishwasher ESF2433W When i first time turn it on, the "Normal" button light keep on flashing with beeping sound. According to the trouble shooting manual, it actually refer to...

If you just bought Dishwasher ESF2433W I suggest you contact an authorized service center because the appliance is under warranty..
E4 : if overflow micro-switch is act and keep for longer than 2 seconds, the E4 would occur. At the same time, the buzzer will alarm for 30 seconds and error 4 will be shown.
Sometimes defects are generated by incorrect transportation appliances so that should be taken into consideration.


Feb 20, 2015 | Electrolux Dishwashers

2 Answers

Hi... I just bought Electrolux Dishwasher ESF2433W. When i first time turn it on, light at "Normal" button keep on flashing with beeping sound. After checking the trouble shooting manual, it actually refer...

E4 Overflow

Sometimes during trasport it is possible that styrofoam float mechanicaly activated overflow microswitch. So, you should check complitely overflow system.

At any time, if overflow micro-switch act and keep for longer than 2 seconds, the E4 would occur. When E4 occurs, the drain pump will run until flowmeter keep motionless for 2 minutes (if the model with the pressure switch (83/63),drain pump would run till the pressure switch reset and continue draining for 60 seconds.) and all the other components will be stopped immediately. At the same time, the buzzer will alarm for 30 seconds and error 4 will be shown. Note: Priority level of E4 is the highest. E4 operation is valid after other error operations have done. When E4 operation has done, all the others are invalid.


Feb 20, 2015 | Electrolux Dishwashers

1 Answer

Error code e4 flashes on belling dishwasher idw604 , washer is empty cant get any programs to work

I found the solution myself. Underneath the machine, there is a plate. On the plate, there is a float and a microswitch, when the water leaks onto the bottom plate it raises the float and activates the microswith which shuts down the machine and shows E4 on display. To get rid of the fault, you have to pull out the dishwasher, then tilt it, and drain the water from the bottom plate. Also make sure that there is no leak in the internal piping, if there is, the fault will come back as soon as the recess in the bottom panel fills with water.Hope it helps.

Dec 27, 2009 | Dishwashers

2 Answers

Baumatic bdw45 Dishwasher

REMOVE MAINS POWER COMPLETELY, then remove the plastic covers from base of machine and sponge out the bottom catch tray

Sep 17, 2008 | Baumatic 18 in. BDW45.1 Built-in...

2 Answers

Hi there ,purchased an EZISET dishwasher privately through trademe, he said it was new. have installed it and each cycle pulls in water ,sprays, emptys and stops. can you please help us. their is a number...

This might mean you have a leak, in your dishwasher. the rings that stop the water from seaping might be broken, or it may be hat your motor is not in good condition. Anyway, i know that that dishwasher is a low quality dishwasher, for it has a reputation all over the internet that it is bad.

I hope you get it fixed!!!

Mar 30, 2008 | Dishwashers

2 Answers

Kenwood dishwasher kdw8st2a

I had E4. Initially couldn't get it to clear.

In desperation, switched it off, turned it on it side and drained it onto the floor.

The E4 disappeared and the dishwasher is working normally.

Jan 22, 2008 | Smeg 24 in. DWF614SS Stainless Steel...

8 Answers

DISHWASHER- Model no: DW009

my dw009 is showing e2 does anyone know what it means ive tried everything

Nov 29, 2007 | Dishwashers

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

321 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers


Level 3 Expert

4342 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides