- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The proper connection for these wires are: the red and black on the RCA cable go to chassis ground and a switched 12volt wire (accessory or ignition) and should be fused at the connection with not more than a 15 amp fuse. No info on the dome light wire connections
several things it could be
relay is bad
computer going bad
over heat saftey feature thats killing the power so you dont crack your block
make sure your fan is running and hook power to fan direct to an power fuse this is when you turn the key to on the fan starts running you can also add a toggle switch to cooling fan so when in accessory it wont run down battery
your vehicle is equipeted with an electric cooling fan if this shuts off your vehicle over heats and shuts off
this ensures vehicle is always running cool
i'd say use a small value, such as 5 amp or less. did you wire this up yourself? most stuff like this comes with an in-line fuse already built into the red power wire. in that case you wouldn't need to have additional fusing.