I am getting problem with inovix 512MB digital mp3 player. the problem it is showing on the screen "Starting" only it is not functioning any more. so what can i do to solve the problem. and also i lost driver cd can give driver information where can i found it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Does it connect with windows XP? If so, you might be looking at a windows compatibility issue - check Inovix Imp 65 manufacturer for windows 7 software or drivers. Or if there are none,
google: Inovix Imp 65 in Windows 7
Hi. I've had similar problems with the same model.
Have you tried a Firmware re-install yet? If not, do that first using the CD supplied with it.
Whilst it's plugged into your USB port, it'll hopefully also get a bit of a charge. I notice on mine that the player will only charge from the USB port when the side on/off switch is in the 'on' (up) position, although there are times when the computer will 'reject' the player with the switch in this position - a series of 'ding-dongs' as it connects and disconnects from the USB port!
If this happens to you, just keep trying! Come back to it each day, and try another Firmware re-load!
Mine took a few days, but then decided to come to life - weird machine!
Hi. My Inovix mp3/4 player suffered a similar fate when it crashed during a Firmware reload. The player went completely dead and wasn't even recognised by the computer when plugged into the USB port.
I basically kept on trying - a couple of times whenever I used the computer - using different ports.
2 days later - 'ding-dong' - Windows XP suddenly recognised something was in the port, and I tentatively attempted a Firmware reload.
Success! (Don't ask me to explain it tho'...)
sounds like bad news - if the flash (update to firmware) failed during update, the item is more than likely dead. Warranty return possible?
Can you try another usb device on that same pc?
just to verify the usb ports are working properly and supplying proper power to the devices.