Question about Akai MPC-4000 Plus Production Center (w/80 GB Hard Drive&Onboard Sounds)

2 Answers

Mpc 4000 lcd

My LCD on my mpc 4000 went blank... I changed the LCD and still having the same problem

Posted by on

Ad

2 Answers

Did you check the orietation of the ribbon connecter?

Posted on May 11, 2008

Ad

Hey, it sounds like the LCD is not receiving any signal from the video output. I would take it somewhere to be opened up for a closer inspection. Again the cause could be something more serious on the internal circuitry. No way of telling till the schemata is tested.

Good luck

Posted on Mar 01, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY HARD DRIVE WAS COMPLETELY ERASED NOW IT WONT SAVE PROPERLY AND MY LCD HAS A LINE THROUGH IT


If your hardrive was COMPLETELY erased, then there is no OS or anything on it.. which then needs to be partitioned, and formatted

Dec 21, 2010 | Akai MPC-4000 Plus Production Center (w/80...

1 Answer

I NEED TO KNOW HOW TO SET UP MY ROLAND JUNO D WITH MY AKAI MPC 1000, PARTICULARLY HOW TO SET UP THE MIDI ON THE ROLAND.


Simple way is MIDI out from Juno to MIDI in on MPC, then (depending on how you want to work), connect MIDI out from MPC to the in on the Juno. If you do this you MUST turn local control off on the Juno or else you'll get double triggers (internal + msg in from MPC). Now to record sequences on MPC , set MIDI to as track in setup window (on the 2500, this is accessed by pressing MODE then pad 9, then press button under the corresponding tab [on LCD]) then set your MIDI channel by port, meaning if your MIDI cable is physically connected to out A, in your LCD in bottom right corner it will show as follows: 1A. This indicates you are transmitting on MIDI channel 1; port A. Remember, MIDI IS NOT AUDIO!!!!! Since the Juno is a synth and not a workstation, all transport controls are handled by the MPC, that's pretty much it... Hope this helps a little, enjoy!

P.S. Go to mpc-forum.com its THE sh**! They also have links for their e-book I have one for the 2500 and its awesome!!!

Aug 16, 2010 | Roland Juno-D

1 Answer

I insert my falsh drive into my mpc 1000 and i


First you must configure your PC to read your mpc 100
flush card. Just insert the software CD driver of your mpc
100 flush card, if you have the CD. Otherwise, you must
have a download from the internet for the software driver.

Nov 08, 2009 | Akai MPC-4000 Plus Production Center (w/80...

1 Answer

How do i Installation new ram on the mpc 4000


You have to first make sure the ram matches with the motherboard. There are front side bus speed issues that have to match up. If you can get on the internet go to www.crucial.com and let it analyze your computer. It will tell you exactly the speed and type of RAM you need. If it all checks out then let me know and we'll test it..

Apr 27, 2009 | Akai MPC-4000 Plus Production Center (w/80...

2 Answers

Akai MPC 4000 Plus


You could set the sample to "one shot" in the trim page or in the Program>KG Mix>Zone page.... it is currently set to "as sample"... i like to use the release to let the sample fade out as long as i like... its a lot diffrent from the old poly mono thing but i like it better overall... hope this is helpfull.

Apr 16, 2008 | Akai MPC-4000 Plus Production Center (w/80...

2 Answers

Akai mpc 4000


Dear fixya thank you for replaying to my e-mail about my mpc 4000 problem, and yes after pulling my hair out and further investigation i did fix the problem. i had no audio comming from one of the main outputs and all i did was change that one faulty audio cable and everything was all good. I took the no good cable, tied it in to a knot and dumped it right into the trash can. Now im back to master beatz...

Feb 16, 2008 | Akai MPC-4000 Plus Production Center (w/80...

1 Answer

Loading Sounds


http://www.mpc-forums.com/viewforum.php?f=2&sid=326096fc58be08565d42f2d4ffbaf508

I've answered this question twice with no love..........

Oct 31, 2007 | Akai MPC-4000 Plus Production Center (w/80...

2 Answers

Mpc 2000


the screen has probly burned out.. u need to get it replaced

Sep 27, 2007 | Akai MPC-4000 Plus Production Center (w/80...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Computers & Internet Experts

Marvin
Marvin

Level 3 Expert

82322 Answers

Alun Cox

Level 3 Expert

2678 Answers

richie46

Level 3 Expert

12962 Answers

Are you an Akai Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...