Question about Zanussi ZWF1430W Front Load Washer

1 Answer

Zanussi ZWF1437W washing machine - wont start

Programme for synthetics, temperature 40degrees, 900 spin all selected and lighting up on panel. time of 1.16 is also displayed. The door is closed yet the light is not on and the start/pause button also wont light.

The washing programme wont start, the reset button when selected only displays error. Have tried: unplugging machine, emptying filter, checking door is closed properly and nothing is caught in door seal. Any more suggestions? HELP PLEASE!

Posted by on

  • 7 more comments 
  • tazcork Jan 25, 2008

    the error displayed is ERR when any button is pressed...what does this mean

  • Anonymous Mar 09, 2008

    machine was just finishing a wash and the electricity went off so when the electricity came back on i put another wash on but when i tryed to start the wash it kept saying ERR . how do i fix this

  • Anonymous Mar 23, 2009

    power went off now it won't start it just beeps but no err message

  • Anonymous Mar 13, 2014

    Panasonic model na 147 vba wont start,door door symbel shows locked on display,error code also shown [E03],slight clicking noise from door but not all the time??

  • Anonymous Mar 13, 2014

    Panasonic model NA 147 VBA,machine wont start,shown as door locked on display,slight clicking noise from door but not all the time,error code of [E03] on display??

  • Anonymous Mar 15, 2014

    Hotpoint Ultima Washing machine WMD9692 changed language and having tried to reset it to English have now lost all visible signs on the LED DISPLAY AND THE PAUSE BUTTON IS FLASHING

  • Anonymous Mar 19, 2014

    every attempt to start brings on the door and spin light and machine wont work

  • Anonymous Mar 19, 2014


  • Anonymous Mar 30, 2014

    Stopped in middle of run and door wont open



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 96 Answers

The error message "Err" usually indicates that the wash program and option are not compatible. 40 degrees and 900 rpm Spin should be o.k.. I would try another wash program with no special options and see if the problem goes away.

Posted on Mar 07, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Re: Zanussi ZWF1437W After setting programme on machine and after about 30 secs programme is cancelled all lights go out and zero in display and beeps. I have cleaned out filter at bottom of machine twice...

Sounds like you have a heater element problem. If the element is at the back then you should be able to access it by removing the back plate and unscrewing the middle nut and pulling it out, may need to pry it out as it can be tight and fit the element. If there is no back plate then you will need to remove the entire back panel, do this by first removing the lid, then remove the 2 screws at the bottom middle and 2 at the top that hold the back panel, and then it should slide out. Hope this helps.

Mar 04, 2011 | Washing Machines

1 Answer

Machine wont stop washing on programme 9! went for days. Had the error lights flashing but that stopped.

If you select a rinse and spin programme and it completes the cycle, then I would say that the heater element is probably faulty, because the programme will not advance until the water has reached the correct temperature.
If it does not complete the rinse and spin cycle, then it is likely to be the control module that is the problem.

Feb 09, 2010 | Indesit W 123 Front Load Washer

1 Answer

Washing curtians

Select a delicate or wool programme, this will give you a cool wash and a slow spin.

Feb 03, 2010 | Zanussi F1045W Front Load Washer

1 Answer

Zunussi zwf1437w Keeps stopping during programmes

This sounds like a drainage problem. First thing is to check the filter behind the flap on front of machine.
Please post back your findings for further assistance.
Thankyou for using Fixya.

Jan 23, 2009 | Zanussi ZWF1430W Front Load Washer

1 Answer


yes sounds like door interlock cheap and easy diy job goodluck and unplug regards jason

Jun 14, 2008 | Zanussi ZWF1430W Front Load Washer

1 Answer

Zanussi washing machine wont spin

check the drain hole when you start the machine if the water is coming back out , if yes that means your dump valve is bad.

Apr 23, 2008 | Zanussi ZWF1430W Front Load Washer

2 Answers

Zanussi Washing machine

when any of the buttons are pressed ERR is displayed.

Jan 24, 2008 | Washing Machines

1 Answer

Zanussi ZWF1437W Washing Machine Problem

My Zanussi is 5 years old it onn th whole works well not making over the odd noise but is often marking my clothes with splashes of light brown after washing, which dosn't come off even with stain remover .
What could this problem be.

Dec 11, 2007 | Zanussi Washing Machines

Not finding what you are looking for?
Zanussi ZWF1430W Front Load Washer Logo

999 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

shaun taylor

Level 3 Expert

1527 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides