Question about Canon PIXMA MP600 all-In-One InkJet Printer

2 Answers

Pixma mp600r scanning setup

Hi .. i am trying to install the scanning solution via my wireless link. I can priint to the printer.. but when i try and install the scanner - i get a error stating thhat the scanner is not connected. Can i scan via wireless or only via bluetooth??

Posted by on

  • 2 more comments 
  • Kangajoe Jan 26, 2008

    Yes, I have the same problem running an MP600R with Vista Home Premium.
    The strange thing is that the scanning function worked wirelessly for about 2 weeks then it went 'haywire'!
    I have tried uninstalling and reinstalling all of the associated software and drivers as well as downloading the latest versions from Canon.
    I have even cleared the Windows registry of all Canon entries before reinstalling.
    But it still won't work! Not even via the Ethernet cable.
    The only way I can use the scanner is via the USB cable.
    I have e-mailed Canon Australia support but haven't yet received any response, nearly a week later

  • kjetil134 Oct 17, 2008

    I have the same problem.  The solution explained doesn't work for me

  • Anonymous Mar 26, 2014

    SCANNING MULTIPLE PAGES TO EMAIL IS NOT WORKING

  • Anonymous Apr 01, 2014

    Tje on--screen menu on the Pixma has gone blank and I get a message from the word processing program to which I am trying to add the scanned item that it cannot contact the scanner. I also received a message that the scanner was busy. It wasn't.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found that corrupted COM dll's was screwing up my scanner communication via wireless.

I installed Ashampoo WinOptimizer 2008.

I then uninstalled all Canon software & drivers, then deleted all Canon folders from the Programs folder on the C: drive.
Next I ran a search in regedit for all Canon entries and deleted them too.

Finally I ran the registry cleaner in Ashampoo WinOptimizer 2008 which identified a number of orphaned COM dll's, these were deleted.

After restarting I then shutdown my Zonealarm firewall & virus scanner.
Next I re-installed the Canon software in this order
1. MP Navigator
2. Drivers (printer & scanner)
3. IJ Network utility & Network scanner utility.

I then reconfigured the wireless setting.

After restarting I then had to give all Canon utilities and programs permission in Zonealarm control

Posted on Feb 02, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Try turning off the windows firewall.
If that works, then add the Canon scanner app to the list of applications that are allowed through the firewall, then turn the firewall back on again.

Posted on Feb 02, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does my canon PIXMA 452 say pc not connected when I hit the start scan button


Hi, several things i would be asking
Do you get an error code?
Is the error on the PC or Printer?
Can you print?
How is the Printer connected USB or Wireless

the first is the error code will determine where the fault lies.. if in the 5000 range.. its a hardware problem and would need to be repaired by a service center or repairer.
if you get the printer error.. check the cable or wireless connections
if the PC error it could relate to software you are using to scan too, even if you acquire the correct twain driver (select source).. some are not compatible.. try the scan function in your Canon Utilities IJ Scan Utility. Scan it there first and save it as a PDF or image file.
if you can print its not a connection problem if you cannot print try another USB/printer cable Or make sure your device is setup for wireless run the installation software again and complete the wireless procedures in setup. I hope this helps.. or post me the error code and i can give you a definite answer.. Cheers!

Jun 09, 2014 | Canon Pixma MX452

1 Answer

Mp600r keeps saying offline


Go to start menu, usually in bottom left corner. Go to control panel, find printers, double click. Find your printer (you should see the name of your printer. If you do not see it there, it is not installed. If you do see it right click on the icon, and left click set as default printer. You should see a green check mark by your printer icon now. If not try again. If that fails, uninstall and reinstall your printer software, following your manufactures instructions.
Hope this helps

Dec 28, 2012 | Canon PIXMA MP600R All-In-One InkJet...

1 Answer

Print from iphone 4s


hi Francesco Mauri.. try follow this link , hope can solve your problem . http://itunes.apple.com/us/app/canon-easy-photoprint/id331269951?mt=8

importants:: printer must to be connect via wireless first , then the iphone will scan and detect.

Apr 01, 2012 | Canon Office Equipment & Supplies

1 Answer

Canon mp600r won't turn on


Try to unplug the printer wait for 120 seconds and plug it back into the wall for power. Make sure that the power cord is plugged firmly on both ends, at times they become loose, very common. If this does not work please explain when was the last time it worked and anything else that could help to resolve the issue. Thanks

Sep 05, 2009 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

Canon Pixma MP610 not connecting to scan


Had the same problem. Don't think it scans wireless; worked fine when I connected with USB cable.

May 18, 2009 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

Poor Wireless Printer Connection


Yes move the printer closer to the router or vice-versa, or make sure their are no microwaves between the router and printer. Chordless phones, thick mason or plaster walls can also hurt the signal range...Good Luck

May 03, 2009 | Canon PIXMA MP600R All-In-One InkJet...

2 Answers

Canon MP600 won't scan


i would say maybe first step os to unistall all canon mp600r software includin scanning programs and reinstall them and see if it then works. this might cure your fault but make sure you do it from the setupdisc not the canon website.

Hope this helps

Oct 14, 2008 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

Can't get Canon PIxma MX700 to work over my wireless


how do you make the print larger...it's coming out miniscule

Feb 07, 2008 | Canon PIXMA MX700 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA MP600 all-In-One InkJet Printer Logo

1,225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2104 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...