Question about Abit (WLP-01) Wireless Adapter

1 Answer

Abit wlp-01 suddenly won't find wireless network

After trying to install a CA security suite form my intenet access provider, my WLP-01 suddenly stopped finding my home wireless network in one of my PCs (VISTA operating system). It had previously worked for about a year no problem. If I screw around for a long time turning radio on/off, and disabling/enabling it sometimes finds it and will then connect with no problem. I can transfer the same card to another VISTA PC I have and it works perfectly. I have uninstalled the CA security suite and uninstalled/reinstalled the Abit driver several times. It seems as though there are files that are not getting totally wiped by the uninstall (even after I delete the Abit folder in Prgram Files).

How can I wipe the slate clean and get a good install of the WLP-01 wireless card?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Abit wlp-01 suddenly won't find wireless network

With other adapters, I have needed to run a registry cleaner WinASO or RegistryFirstAid to clean out the unused entries so they could be reinstalled properly. Similar to removing some famous brands of Anitvirus that do not completely remove themselves.

Posted on Mar 24, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How can I find the security key for a netopia 3D Reach Wireless USB Card?

There is no security on a wireless receiver. Security is set on the wireless Access Point or router. Check your router documentation or talk to the person who manages the wireless network you want to connect to.

If I misunderstand your question please let me know and we take it form there.

Dec 02, 2012 | Netopia Network & Wireless Adapters

1 Answer

Router abit wireless 5001

After trying to install a CA security suite form my intenet access provider, my WLP-01

Apr 06, 2012 | Abit (WLP-01) Wireless Adapter

2 Answers

Abit wlp-01 picks up many networks and I try to access two of these without success, I enter the SSID and the Passphares of the modem

I am unsure as to what your question is? Do you want to know how to use the wireless adapter to connect to networks and access the internet? If this is your question, here is my answer;

When the wireless adapter picks up the signal to the network that you wish to access, choose to connect to it. From that point, you need to know the name of the network, the WEP Code or password for the router or network connection and the passphrase or password that allows the user to connect to the network.

Once all the above information is entered, connecting to the network should not be a problem. If you are encountering specific errors or problems, use the comment or reply link on Fixya near your question and report them to me. I will be happy to assist until this problem is solved.

Sep 20, 2011 | Abit (WLP-01) Wireless Adapter

1 Answer

The Host (wired) computer is running windows 7. The wireless computers, using Vista, cannot access host.

The NetGear WNDR3400 N600 Wireless Dual takes security very serius and therefore u should read the manual very carefully, giving attention to the pages about the different forms of connections to the router with the different forms of security.
U can access the router as it is described in the amnual, or if not U have to reset and re-initialize all connections with evtually new security settings.
U know, even a router is only a simple com-device, which sometimes hangs and needs to be re-setted.

Good luck

Mar 04, 2011 | NetGear WNDR3400 N600 Wireless Dual Band...

1 Answer

How to set up password

insert the disc supplied by your ISP internet service provider then enter the the user name and password you provided to your intenet service provider ISP then just follow the prompts
hope this helps

Dec 22, 2010 | Arris Surfboard SBG900 Modem Cable Modem...

1 Answer

What do I need to make this WI Fi

First make sure wifi switch on laptop is turned on press Fn key +F5 then turn on wifi power . Make sure wireless network driver installed and enable in network settings. Check wireless led on router it should be on. Access your router with below method . If all settings of wifi router are fine then RESET it to defaults. For that press RESET button for 10 seconds it is in back side of router. Then configure it again with below method. Connect your router to computer with ethernet cable then you can access it with following default link. or or or If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on WAN settings and set as your internet service provider settings enable wireless .If you want secure wifi then enable WEP security in wireless security then enter code it is your password for connect wifi. Let me know if you need further assistance. Thanks for using FixYa.

Aug 04, 2010 | Intel Network & Wireless Adapters

1 Answer

How to use the wireless key


Wireless keys are like your secret password. Provided you have a wireless router and wireless devices to access internet - You might want to secure the wireless signals emitted by the router to ensure that your neighbour is not using free internet :-). So all you do is access the router's setup page and under wireless tab enable the wireless security feature.

Wireles security generally of two types

select the one suits best to your network and save the changes. once you are done with the router - you will now search for wireless network from your computer/s and select the network. The router will now ask you to type the password (the one you eariler entered on the router). Enter the correct password and you will be connected. Now your neighbours can see your network but cannot access it unless you share your password with them.

May 10, 2010 | Network & Wireless Adapters

1 Answer

Not providing IP address for wireless devices.

For WEP security, this is the correct behavior when the wireless device doesn't provide the right password for the network. The device will associate to the network, but not be assigned an IP address.

What is the brand (linksys, d-link, trendnet, etc) and model number of the wireless access point?

Oct 24, 2009 | Zoom Network & Wireless Adapters

2 Answers

How do I ecrypt my internet connection

Encryption (WEP) is enabled/configured on the wireless router (access point) for the wireless network. If this is your home network, then you need to be the one to set-up the encryption on the router first, then you 'join' the encrypted network using 'keys' you created during the configuration on the router. If this appears to be written in 'gerneral' terms, it is true because each router manufacture does it a bit differently.

If you are joining a 'public' WIFI connection that does not have security, you will not be able to encrypt it since the router is providing an 'open' non-secure access.

Location that present secure encrypted access will provide you with the 'key' to access the network, which you add to the set-up configuration of your adapter via the driver properties of your operating system

Oct 13, 2009 | NetGear : WG111 54 Mbps Wireless USB 2.0...

1 Answer

Abit wireless adapter unable to locate wireless network

well!! I have an answer for you.your comp is loosing the IP address.connect your computer through cable then goto start - programmes - accessories - dos prompt. type`ll get ip address,subnet mask,default gateway.copy it. goto network and sharing center in vista and network connection under control panel in XP,IN Vista,click on view status,goto properties and double click on internet protocol(tcp/ip) or IPv4In XP,right click wireless network connection and goto properties and double click on internet protocol(tcp/ip).type in the IP address,subnet mask,default DNS server address type the default gateway in primary DNS and in secondary your connection won`t drop after this.

Jun 26, 2009 | Abit (WLP-01) Wireless Adapter

Not finding what you are looking for?
Abit (WLP-01) Wireless Adapter Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Abit Network & Wireless Adapters Experts


Level 3 Expert

18258 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers


Level 3 Expert

2072 Answers

Are you an Abit Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides