Question about D-Link AirPlus Xtreme G DWL-2000AP 802.11g/b Wireless Access Point

1 Answer

DWL2000AP+ install Hi There i reboot my computer & need to reinstall my router but i lost my cd & manual Can you please sent me or let me know to install it again PLEASE \CHEERS

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Expert
  • 75 Answers
Re: DWL2000AP+ install

Whats the exact problem does it not connect at all?

Most routers don't need a disk to install anything.

Just plug everything in go to START click CONTROL PANEL go to NETWORK CONNECTION see if you have any connection at all. If you do your router could be blocking incoming data from the internet or other computers connected.

However in doing some research in your stated problem i did find drivers. They can be downloaded at the link below.

This may not be what you need but let me know and i'll try to find what you are actually looking for.

Posted on Jan 24, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I lost my cd for my wireless router so wat do i do its belkin 365 routero install it on my computer again and i need t

You only need the software to install a router if you are connected to it via a USB cable, otherwise you just need the network key (if there is any) to connect to it wireless or just plug in an Ethernet cable directly.
You can always go to the manufacturer's website to download the software.

Apr 30, 2011 | Belkin Wireless Access Points

1 Answer

I have lost my cd to install for my belkin router what shall i do ?

Hi i got your issue

no problem if you lost the installion Cd

Step 1: Contact belkin customer support 18002235546 and select IVR option 5 4 2....they will give You a free cd

Step 2: Or contact belkin technical support 18002235546 and they will assist in installing the router witout the cd

Thank you:

Oct 02, 2010 | Belkin Wireless-G Plus MIMO Router

1 Answer

Lost my cd for net gear wireless-N Dual Band WNDA3100v2 how can i get another one

Are you trying to set up router ?
You can set up your router manually, without the CD.
Make sure that your computer is able to go online directly through the modem.
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Click Here for more information about the routers and network

Aug 26, 2010 | NetGear RangeMax Dual-Band Wireless-N...

1 Answer

How to configured to skybroadband to buffalo router

Are you trying to install the router.
You can do it manually without the CD.
Make sure that your computer is able to go online
through the modem.
If your computer is able to go online through the
Then you need to connect the computer to the
router and the modem to the router.
open the set up page of the router and change the
settings of the router according to the ISP.
Click Here for step by step by instructions

Feb 04, 2010 | Buffalo Technology AirStation WLA2-G54L...

2 Answers

Connected but no internet

del everything in %temp%, if you are using internet explorer, reset it back to factory IE7 select,tools,internet options,go to advanced tab and click reset. Be advised, Vista is notoriously difficult when it comes to internet connection problems especially wireless.

Jul 24, 2009 | 2wire Wireless-G 802.11g ADSL Gateway

1 Answer

Edimax ar-7084

hi, contacted edimax and was told how to reboot the router without the disc, my original problem was a faulty filter on the telephone line which caused an ASDL failure. hope this helps


Nov 19, 2008 | Edimax Wireless Access Points

1 Answer


This router does not need any drivers. The users manual can be found here:
Without the cd you won't be able to use the easy setup wizard, but you can still configure the device. Starting on page 15 half way down it talks about setting up your router using the web-based advanced user interface. Using that information you should be able to configure your router.

Oct 11, 2008 | Dynex Enhanced-G Wireless Broadband Router

1 Answer

Cannot log on to dwl2000ap

If the SSID changed to the default then you know that the router reset to the default settings and you should set your computer to automatically get its IP address via DHCP. I always set up my routers through a Wired connection first, just to setup the router and then go with the wireless. The default for the router should be and subnet . If the computer is set with a static IP address, change it to obtain an IP address automatically or the network card will not bother even looking for an address.

Aug 17, 2008 | D-Link AirPlus Xtreme G DWL-2000AP...

1 Answer

Installation CD

I lost my installation CD and received these instructions from the Belkin Tech Support, and was able to install the Wireless N Router with no problems.
Follow the steps given below for configuring the Belkin N router manually.
- Connect the computer to the "LAN" port on the router and connect the modem to the Internet/"WAN" port, using Ethernet cables. 
- Take a paper clip, insert the paper clip in the reset hole of the router and hold it for 15 seconds.
- The power light will flash and then come back "ON" solid, indicating that the router is being restored to factory defaults.
- The corresponding lights on the front of the router should be lit up.
- On the computer, check if you have an IP address in the range of 192.168.2.x.
- If not, specify a static IP address, gateway and "DNS" address by following the steps given in the link- 
- Log on to the router web interface by typing in, in the address bar of your browser.
- By default, the password is blank.
- Click on "Connection Type" in the left hand column under "Internet WAN" heading.

If the connection type is Dynamic (cable):

- Choose "Dynamic" and then click on "Next". 
- Type in your “Host Name”, if you’re Internet Service Provider has provided it. Else, leave it blank.
- Click on "Change WAN MAC Address".
- Click on the button "Clone".
- Click on "Apply Changes". 

If the connection type is PPPOE (DSL):

- Choose "PPPOE" and click on "Next".
- Enter the user name and password given by your Internet Service Provider.
- Save the settings.
- Click on the "Home" link at the top of the screen. 

Internet Status should show "Connected" on the top right hand corner of the web page.

If the problem persists, please get back to us with the following information:

1. Type of connection provided by your ISP (Is it PPPOE, Dynamic or static).
2. Name of the Internet service provider (ISP).

Aug 11, 2008 | Belkin Wireless-N Wireless Router with...

1 Answer

I don't have a cd installation ...have no idea how to hook this up..please help

You probably dont need to get any cd, but here is a basic setup. 1. First reset router to factory specs..there is probably some sort of reset hole on the router. With router disconnected Stick paper clip inside and hold while you turn back on router about 10 seconds. 2. Next with computer and Modem turned off plug the Ethernet cable from the modem to the WAN port on the router. 3. Next plug an ethernet cable from the router to the PC. 4. Turn on Modem, then PC it should get you on the internet. 5. Usually the Wireless portion is defaulted to ON, so knowing you have a wired connection, you can now try with your wireless device. 6. Windows will find this signal and it will give you an option to connect to it. When you get an IP address, you will be on. To get into more advanced setup, you will need to get into the router. Try It you should be alright

Feb 27, 2007 | Compaq iPAQ Connection Point CP-2W...

Not finding what you are looking for?
D-Link AirPlus Xtreme G DWL-2000AP 802.11g/b Wireless Access Point Logo

Related Topics:

1,665 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Wireless Access Points Experts


Level 3 Expert

18257 Answers

Martin Murray

Level 3 Expert

1614 Answers


Level 2 Expert

66 Answers

Are you a D-Link Wireless Access Point Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides