Question about Mitsubishi VS-45607 45" Rear Projection Television

1 Answer

Blue screen, can only go to antenna "a" or "b", then shuts off

After a power outage, my tv just shows a blue screen with sound. and can only go to input "A" or "B". i can't even watch DVD. please help, the blue screen is driving me and my puppy gonzo!!!!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has answered 200 questions.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 206 Answers
Re: blue screen, can only go to antenna "a" or "b", then...

Lets try "Kickin' the set in the Brain" and see if you can reset it, with the set on and with the remote press Menu-1-2-7-0
do that varly fast and you should arive at the service screen that will let you reset the set, This menu should already have the "Initlize " highlighted, if not move up or down to highlight it then hit "enter", This should bring the set back to the factory presets, if not you have other issues that diging around in the service menu will not fix

Posted on Feb 13, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Mitsibishi 50707

Replace vertical output IC and check capacitors in vertical
power supply....requires chassis pull and above average skill....

Nov 17, 2007 | Mitsubishi VS-50607 50" Rear Projection...

1 Answer

After a quick power outage, we lost everything, just snow on the screen. Was hooked up to Direct TV via the sat input before the outage. Now the TV is on the rooftop antenna input evidently because it...

On my Dir.TV box is a door in the lower right front. Behind this door is a red button. Press it and turn the box back on if it doesn't come back on by itself. It will go through a reboot cycle of 5 to 10 minutes. That should get the satellite going but I'm not sure about the TV input problem. Do you have a menu button on the TV? If so you should be able to find a way to change the input. If not, find your model number, then Google "TV remote" and you should find sites that will sell you an original remote. They will have a box that you can enter your model # into and tell you your remote number. Then Google that part number and shop for the best price. Good luck.

Sep 01, 2010 | Mitsubishi VS-60603 60" Rear Projection...

1 Answer

My 2001 Mitsubishi Medallion recently stopped recieveing HD channel from my FIOS HDTV Box. When switching from standard channels(they work) to an HD channel, the screen shows scrambled mutltiple images and...

If the TV works in the "Other" modes than I would suspect, that the FIOS HDTV box has developed some fault. When a TV goes to a "Blue Screen" this means that it cannot interpret a proper signal, maybe you need to reset the FIOS, anyway check that out, the TV itself, I do NOT think is faulty, check connections, antenna and to TV as well. Unplug ALL from wall wait 5 mins, and power back up, this often fixes a lot or problems.

R - Restore: Restore default settings E - Environment: Change your environment, remove from media cabinet, try different media, try different equipment (TV, router, hotspot, etc.). P - Power Cycle: Power cycle by unplugging your networking equipment from wall for 2 minutes to reset. A - Access this Knowledge Center for useful articles to resolve issues. I - Install the latest System Software Update. R - Resolved: In most cases these steps can resolve your issue.

Apr 01, 2010 | Projection Televisions

1 Answer

Blue screen help!

The TV is fine. You need to fined the original remote. Be sure you have a cable connection on the anttenna A RF connector. Push menu and find the input. Or maybe input menu...experiment and you will find and correct this. Seen this problem years ago, can't remember exactly what the remote reads. But it should not be serious.

Dec 24, 2009 | Mitsubishi VS-45607 45" Rear Projection...

1 Answer

TV screen Flashes blue and then shuts off.

When it flashes blue, are the flashes bright blue lines going across the screen with the picture in the background, if so, It sounds like the Blue tube or blue driver circuit is breaking down after a short period of time. If this is the case, the uPC that controls the set is detecting a large current drain on and is shutting the set off for protection, An engineers expert eye is required I`m afraid. Ian.

Jul 24, 2009 | Sony KP-65WS500 65" Rear Projection...

1 Answer


When tv shows dark picture or Lamp LED start flashing at front of tv then you need to replace Lamp.
Now let me know do you get blue screen on all video inputs or just on cable / antenna ?
It would be nice if can paste picture of tv showing problem to understand easily, like I'm pasting your tv picture as reference.

Thank you.

Oct 07, 2008 | Sony KDF-55WE655 55" Rear Projection...

1 Answer

Blue Screen/Waviness

sounds like convergance ic's mits is also know for bad caps
1000uf @ 16v check for bulges on top of the cap

Jan 05, 2008 | Mitsubishi WS-55809 55" Rear Projection...

3 Answers

Mitsubishi VS-50703

To Fix TV: Press Menu then 1-7-3-0.
Make sure Initial is highlighted in yellow and press Enter.
To get additional input channels:
Press Menu/SetUp/AV Connection/Locked to Input 1: Should be on NO.
1(800)332-2119 Mitsubishi Customer Support

Apr 16, 2007 | Mitsubishi VS-50703 50" Rear Projection...

Not finding what you are looking for?
Mitsubishi VS-45607 45" Rear Projection Television Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1187 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

66604 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides