Question about Sylvania 6419TE 19" TV

1 Answer



Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 518 Answers

Does you TV have Video/Audio inputs? If not you need a channel 3 modulator.


Posted on Jan 24, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to get dvd on tv

There are generally 2 ways to connect a dvd player to a tv.1 If you have 3 rca connectors on the back of your tv (they are color coded yellow for video and white and red for audio left and right channels respectively) and the same connectors on the back or side of the dvd player.Use rca cables to connect the dvd player to the tv,connecting yellow to yellow white to white and red to red.Using the remote put your tv on video.Put the channel selector on the dvd/vcr player on video or L1 or E1 (depending on what brand dvd/vcr you have).2 connect a rf (coaxial cable from the rf output of the dvd/vcr and connect this directly to the rf (antenna) input to your tv.Put the tv on channel 3.Play the dvd/vcr to see if you have the video.If not put the tv on channel 4.Some dvd/vcr's put their signals out on channel 3 and others on channel 4.Good luck.

Sep 15, 2013 | Disney 13" TV

1 Answer

Sanyo TV connect to cable box connect DVD player

If your DVD/VCR combo player has three RCA connectors (yellow, red, and white), you can connect them to the corresponding inputs on the front of your TV.

Dec 29, 2012 | Sanyo Standard (CRT) Televisions

1 Answer

I have a sony triniton color tv medel 3 KV-DR34M89. How do i connecft and play a DVD on it.. i treid connect the yellow,red and white cables on all the slots but no success. please advise

Connect cables:
Connect yellow to yellow (dvd player to TV)
Connect white to white (dvd player to TV)
Power on DVD and TV and insert a DVD into the player, press PLAY.
Use your TV remote to select the proper input:
Your remote should have a button like INPUT SELECT or Video, keep pressing until you see the DVD players output.

Feb 20, 2011 | Sony FD Trinitron WEGA KD-27FS170 TV

2 Answers

I need help connecting tv to DVD player VCR and satellite box

Connect as following
1. Set top box - RF cable from STB to antenna socket on TV.
2. DVD player output to Video1 on TV
3. VCR output to Video2 on TV.
May be you can route VCR through the DVD player or viceversa. That you can see and try on ground.

Sep 28, 2010 | Haier TN201AUV 20" TV

1 Answer

I was given a GE 27GT616 television but can't figure out how to connect a converter box or dvd player

If your tv has video in socket (yellow color)and audio in socket(white color),you will connect the dvd player audio video output. it will give give clarity picture. your tv have not av socketyou can connect your dvd player audio video output to converter audio video input.And then connect to converter RFout to tv Rf input(antenna socket)and tune the tv you wlii get picture.

Jul 31, 2010 | GE 27GT616 27" TV

2 Answers

How do i connect a dvd player to the tv?


Behind DVD player you will have sockets
(red -Audio
white -Audio
yellow- video)
Same set of sockets will be there behind your TV also.

Please connect the Audio video cable correctly accordingly to the colour.

Now your DVD player is coonected to the TV. You can start using your DVD player


Jul 23, 2010 | Disney Lightning McQueen TV

1 Answer

I need to know what channel to switch to in order to connect my dvd player. it`s an akai 25 inch tv, model cts 2550, serial # 39zta51280x. thanks for any help. louie

It is a general question just try my idea to connect to the DVD player channel.
In the remote you may find any of the below button, press it.
1. DTH 2. DVD 3. VIDEO
If not just call the customer care help line to assist through online..
(Before that remember one thing you have to connect the dvd player wire in the TV to activate the DVD channel)
Thank you.

May 08, 2010 | Akai CTS2550 25" TV

1 Answer

How to connect a 1999 zenith TV to a cable box and

Connet the output of the cable box to the DVD player and the TV out output of the DVD player to the TV (TV must be tuned to Channel 0, Chanel 3 or 4). You should be able to use the remote to switch between the DVD signal and the cable signal.

Hope it helps.

Sep 08, 2009 | Zenith A25A23W 25" TV

1 Answer

Cannot connect DVD player

Have you connect all the component video out cables from DVD to your WEGA TV? if so just set your tv to dvd input.

Jun 01, 2009 | Sony FD Trinitron WEGA KV-27HS420 27" TV

1 Answer


Get a set of video cables to connect the DVD player to the TV.
Then follow the numbered instructions in this post to connect the DVD player, and use your TV remote to switch the video mode when you want to watch a DVD, then switch it back when you want to view TV.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Jan 24, 2009 | Toshiba 32AF42 32" TV

Not finding what you are looking for?
Sylvania 6419TE 19" TV Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sylvania Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66413 Answers

Kenneth Walker

Level 2 Expert

133 Answers

Brad Brown

Level 3 Expert

13346 Answers

Are you a Sylvania Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides