Question about Zanussi FJD1466W Front Load Washer

2 Answers

Problem with PCB control board

I have to replace the PCB board but the only one I can find is being advertised as unprogrammed. How do I programme it?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has answered 200 questions.

  • Expert
  • 244 Answers
Re: Problem with PCB control board

What your better off doing m8 is go down to your local domestic appliance repair shop take your model number down with you ask for the pcb board they should be able to get ahold of a second hand 1 if notthey will get you 1 that you can just slot in and away you go never heard off parts having to be programmed and ivebeen fixing washers for 12years now m8 this is your best option another thing m8 go onto ebay go to major appliance parts once there type your model number in and it will bring up all the parts listed ull get 1 there new that u can just slot in and they are cheaper then buyer from a retailer let me know how it goes if u cant find i tell me and ill try and find ebay item number for u

Posted on Jan 24, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 126 Answers
Re: Problem with PCB control board

You must have a technician to programme it. The program code, is uniqe for your machine. It's precision work to do the programming.

Posted on Jan 24, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Electrolux washing machine wh1092 when turn on lights 1,4 and 8 flashes. Nothing happens

If I understand correctly there is blinking LED-s from "Prewash","Rinse Hold" and "End of cycle". In binary code it is fault E91 what means communications error between main PCB and display board.
So, could be: main electronic PCB, display board or wiring.


Dec 13, 2014 | Electrolux Washing Machines

1 Answer

Aquasmart 8Kg washer- spin cycle short

my problem is I did two wash and then I put two thin curtain in to wash and that is when I had this problem

Jul 07, 2013 | Fisher and Paykel Aquasmart wl80t65c

2 Answers


pcb is a power control board

May 17, 2012 | Washing Machines

3 Answers

Toshiba washing machine AW-1160SM error E7-1

my washing maction have a priblem E7 err

Jan 11, 2012 | Washing Machines

2 Answers

My electrolux ewf 1030 get err 44 help me pls ?

E44 - It means "Door closure sensing circuit faulty".
Replace the circuit board and restart the diagnostic cycle to check further alarm condition.
When the washing programme is started by pressing the START/PAUSE button, the bi-metal PTC (contacts 3-5 on door interlock device, no.3 on electrical diagram) is powered by the triac (DOOR TY) on the PCB: after 2 - 4 seconds, this closes the switch (5-4) which powers the electrical components of the appliance (only if the door is closed). The door interlock prevents aperture of the door while the appliance is in operation.
Microprocessor recognize closure position by sensing circuit connected to J2-1 on electronic board.
At the end of the washing programme, the PCB disconnects the interlock from the power supply, but the door remains locked for 1 to 2 minutes (PTC cooling time).

electrolux-ewf-1030-get-qdylxco5jx0zjejqiwkxkzw5-1-0.jpg Dado

Aug 12, 2011 | Electrolux EW1200i Front Load Washer /...

1 Answer

I have a hotpoint the display comes on but will not commence programme when selected - shows f 01 on screen.

Hi, the F01 error indicates a motor triac fault.

This triac is on the main control board (module or pcb) which is located at the bottom right rear (viewed from the front). Unplug the appliance and take the rear cover off.
Check the wiring to the motor, check the motor plug and check the motor carbon brushes. If these are all ok, check the control board.
If everything checks out ok it's likely you will need to replace the main control board and possibly the motor too.

Jun 20, 2011 | Hotpoint Washing Machines

1 Answer

My ariston margarita dosent want to take a wash load

Most likely the EPROM is gone, or more commonly known as the PCB (Programm Control board) and it needs replacement. Costs about £80 for the board plus installation.

Dec 14, 2009 | Ariston Technologies Ariston AWD12 Front...

8 Answers


I have checked the Hotpoint web site, and a pcb is £114.00.
You also need the eprom which plugs into the pcb,this is another £24.00, and is unprogrammed, this means that it is a blank memory chip, and has to have the programmes put into memory.
This is something that only Hotpoint can do, so you have to add the cost of calling an enginner to the cost of the parts.
This as you can see, makes it very expensive to repair.
It would be in excess of £200.00.
There is one other alternative, and that is, if the washer is less than 5 years old, then you should be covered by the Hotpoint 5 year part guarantee, but you would have to confirm this with Hotpoint.
It would certainley be cheaper to do it this way.
Plz rate my solution.

Jan 11, 2009 | Hotpoint Ultima WF865 Front Load Washer

1 Answer

Time saver on my Hoover Hd Vision washing machine keeps coming on mid wash! Don't know how to cancel it.

my machine had the same fault and seems to be quite common. What I didwas remove the pcb behind the control panel buttons, its held on byseveral plastic clips and simply ensure the ribbin cable was making agood conection from this board to the programmer. My fault was either aloose connection or the pcb was not in the correct position either way,it now works perfect and only took 5 mins work @ no cost.

Aug 30, 2008 | Washing Machines

1 Answer

W134s silver indesit

the heater, sounds like its gone

Dec 15, 2006 | Indesit W 123 Front Load Washer

Not finding what you are looking for?
Zanussi FJD1466W Front Load Washer Logo

Related Topics:

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides