Question about RCA Universal Remote Control

3 Answers

I nned the manual for my rca universal remote

I have the rca crk74ba3 and it doesnt have a code button so how do you enter the code..ive seen all the pages with the codes from other questions but it still doesnt tell you how to put in the code..

Posted by on

  • 1 more comment 
  • chilers Feb 05, 2008

    I have the RCA CRK76TA1 remote and can not figure out what button to push to allow the code to be entered. I have tried about every combination I can think of. This remote does not have a "Code Search" button.

  • Anonymous Feb 15, 2008

    need to know what button to hold down while programing remote

  • Anonymous Feb 16, 2009

    Can't find the code search button or how to enter a code in manually



3 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

I found the instruction book in PDF file here:

I can program it for my VCR but for some reason I can not get it to accept my TV. When I follow the instruction for the TV, the red light flashes. When I set it up for my VCR, it does not flash and I found the correct code doing it manually (not using the auto code search).

Let me know if you get it to work for the TV codes.

Posted on Feb 05, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has answered 200 questions.

  • Expert
  • 211 Answers

See if this web sight will help you in your remote control problem. If not, write me at and I'll try to help more.
RCA Universal Remote Control-Programming Codes

NC Electronics
Mills, Wyoming

Posted on Jan 26, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Would someone please provide a link to the actual manual for the RCA CRK76TA1 manual? RCA sold it to AudioVox who sold it to Thomson, but Audiovox has no link to supply for Thomson.

RCA bites.

Posted on Dec 28, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Honda crv radio

Whoever give you the code go back to them to resolve this. I believe the code is incorrect

Feb 02, 2018 | 2002 Honda CR-V

1 Answer

I have an 32 rca t.v my son has locked and won't

I got this from the manual. Page 26.

Press MENU to see the main menu.

Press CH+ or CH- to highlight preferences.

Press OK to enter the preference submenu.

Press CH+ or CH- to highlight Par. (Parental) Control.

Press OK. Enter Password will appear on the screen.

If you want to set a new code, go to steps 6-8 directly. (You can press the number buttons to enter a four-digit code. The code "0000" is the default password. If you have not set a code previously, then "0000" is the code.)

Resetting Your Password

Press VOL+ on the remote and the CHANNEL + on the front of the TV at the same time. Enter New Pwd. will appear on the screen. (You must be in the Enter Password screen when attempting this.)

Press the number buttons to enter a four-digit code. The code will appear on the screen as you enter it.

Press OK to save the code.

Press MENU repeatedly to exit the menu or the menu will automatically disappear within a few seconds if no buttons are pressed on the remote control.

If you need more, get the manual here:
Pages 25 through 30 are all about lock and channel/show blocking.

Jun 05, 2012 | RCA Televison & Video

1 Answer

How do we reset parental level? ive done everything and it wont allow us to choose the off option weve even put in the 7444 code and that doesnt work either

press 'select' button-->enter 7444-->enter new code-->re-enter new code-->scroll down to parental control level to select level restriction
hope this helps :D

Jul 16, 2010 | Sony PlayStation 2 (PS2) Console

1 Answer

Ive tried entering the master code but it doesnt work. before this i wanted to reformat my phone using the *#7370#, it then asked for my lock code. i entered the default lock code but it does not work.....

turn off your phone.when you switch it on hold the *,green and 3 button simultaneously .remember *(star),green and 3 button. hold these three buttons and switch on your handset, it will be formatted without the lock code option.
good luck

Oct 08, 2009 | Nokia N70 Cellular Phone

1 Answer

No code search button

i have an rca converter, need the code for set up for a magnasonic.

Apr 14, 2009 | Televison & Video

2 Answers

Which button for code search

Sorry it took so long to answer you request for assistance.You can find the instructions and codes you need to program your television at the RCA customer support website [ ] Copy this web address and paste it into the address bar of your web browser. This will take you to the RCA main customer support page. Just go to the universal remote control section and find your model remote control. Use the model number to find the technical support information page. On this page will be a copy of the owners manual and the remote control codes to use with your products. I hope this information helps you with your problem of needing instructions and codes to use your remote with your products. Thank you for using FixYa and have a nice day!

Dec 28, 2008 | RCA 3-Device Universal Remote with...

1 Answer

Codes for sylvania lcd tv

with the tv on press tv button on remote then setup then enter one of the following codes 10171 or 11271 or 11314 the the tv should shut off if the right code is entered if it doesnt work then a setup code has not been set

Feb 08, 2008 | RCA RCR860 Remote Control

5 Answers

Lost my manuel "codes" to my rca universal remote control crk74ba3

magnavox codes, 11454, 10054, 10030, 10706, 11990, 11963, 11944, 11931, 11904, 11525, 11365, 11254, 1198, 10802, 13=0386, 10230, 10187, 10186, 10179, 10096, 10036, 11028, 10024, 10020

Nov 07, 2007 | RCA Universal Remote Control

Not finding what you are looking for?
Televison & Video Logo

1,858 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74999 Answers


Level 3 Expert

905 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides