Question about OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Oki Microline 320 Turbo page alignment

We have several Oki 320's that seem to lose TOF while printing. If we reset TOF the first page prints correctly, but each page that follows starts printing higher on the page. The form tear-off stays in the right place. I've also tried a hard reset to factory defaults and then made the necessary changes to page length, etc but it continues as before.

Posted by on

  • 3 more comments 
  • Sven_Gali_ Jan 25, 2008

    I would think that too, but we have hundreds that are connected to the same server, printing from the same application that aren't misaligned. Most of the others are connected via the parallel port through HP JetDirect print servers, but these 2 are connected via the serial card to a Digi PortServer. Perhaps it is something with the Digi or the Serial I/F?

  • Anonymous Jan 28, 2008

    I'm having the same type of issue, printer has been working correctly for a couple of years with the same software, but now is doing the exact same thing as this post. I'm wondering if it is a hardware issue?

  • Anonymous Feb 12, 2008

    the printed needs to be aligned, i am new to this so therefore i dont know have to align it

  • Anonymous Feb 12, 2008

    i am having trouble with the printer printing straight, i think it need to be aligned, but i am new to this therefore i have no clue how to do this

  • meshuggah22 Sep 26, 2008

    I have the same problem of ToF changing after each job passes.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 139 Answers

This sounds like a problem in the computer program that is sending the prints to the printers....especially since it is happening in several of them.

Posted on Jan 23, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have a microline 320 turbo. we installed a new dell computer and now cant get the printer to print corectly on contineas feed labels. The print head starts on the right side and prints off the sheet...


Try downloading and installing an updated driver for your printer.

Here is the driver download page for your printer: MICROLINE 320 TURBO < Drivers & software

Select your operative system, download the file, then run the installer.

Mar 03, 2009 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Rolling halfway down the page


is the form tear off on?
if it is try changing it to off

Dec 03, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Oki microline 320 turbo


Your Oki model does not need drivers, for they are already contained since Windows 98 and up. However, if it still doesn't work, check that the printer emulation is set to IBM and then install a new printer using the IBM Proprinter II/III driver, also contained in Windows.

Be blessed.

Oct 02, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

OKI DATA MICROLINE 320 TURBO PRINTER PROBLEM


Hi Charles,
Use the IBM proprinter driver for this printer and select IBM in the menu of the printer.
Hope this helps.
Dezzi

Sep 10, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Oki microline 320 turbo printer


Did you check your print queue? May be there is an error in there waiting for you to instruct it.

May 22, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Page comes up blank !!!


check your rribbon.
also cjeck your head.
try to tast page from printer properties.
also try to print from dos .
check your printer datga cable.change it

Mar 25, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

2 Answers

OKI Microline 320 Problem...


I think you maybe using the wrong driver.Printout the menu if you are set for IBM than choose the "IBM Proprinter" driver in windows.Hope this helps.
Dezzi

Feb 26, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Manual for oki microline 320 turbo


the product manuals are available here

http://my.okidata.com/PP-ML320Turbo.nsf?opendatabase

Feb 23, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

1 Answer

Okidata microline 320 turbo 9 pin printer


What driver are you using, you should try the IBM Proprinter Driver.Hope this helps.
Dezzi

Feb 11, 2008 | OKI MICROLINE 320 Matrix Printer

1 Answer

Page advance problem


print out your menu of the printer and load the IBM Proprinter driver in windows ,your printer default driver is IBM Proprinter this will sort out the problem.you have probably loaded a OKI driver while the printer is set for IBM.Hope this helps.
Dezzi

Oct 16, 2007 | OKI MICROLINE 320 Turbo Matrix Printer

Not finding what you are looking for?
OKI MICROLINE 320 Turbo Matrix Printer Logo

1,052 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment & Supplies Experts

Jimbras

Level 1 Expert

13 Answers

Don  Farrell
Don Farrell

Level 3 Expert

1018 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...