Question about Philips Magnavox 9P6034C 60" Rear Projection Television

1 Answer

Buttons won't work with different cabinet need pinout

I replaced the contents of one 60 inch philips magnavox with another that had a badly damaged cabinet it works but cabinet frt panel buttons are different I have one connection listed keypad and the cabinet has 3 connectors listed keypad -led-rcvr does anybody have a diagram for the 7 pin keypad board?

Posted by on

  • chris gaines Nov 11, 2008

    I moved the front panel is still on it . Im sure it would work it's just too far to go get. If the infra red was hooked up on this one I could use a remote . sure would appreciate any help gnd pin and ir pin a good guess would be worth trying at this time. thank's tvman66@yahoo.com

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Philips Master
  • 8,617 Answers

What was the model number of the set that has the 7 pin keypad that you are needing the info on? Can you change out the front screen panels so you can use the origional controls for your chassis. If they are both 60 inch you may be able to switch out the front screen and control trims.

Posted on Jan 23, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a manual for my 60 inch philips magnavox wide screen t v information on how to connect vcr or dvd


quick-start guide:
http://download.p4c.philips.com/files/6/60pp9701/60pp9701_qsg_aen.pdf

user manual:
http://download.p4c.philips.com/files/6/60pp9701/60pp9701_dfu_aen.pdf

Nov 17, 2010 | Philips Magnavox 60PP9701 60" Rear...

1 Answer

Philips Magnavox 9p6034c bulb is bad


If you have to replace one, they are very difficult to pull out and replace. You must do a convergence on the color of the tube you replace. You will be replacing a picture tube not a bulb. You may need to replace the fluid in the one tube. Or you may have a convergence problem. You need a TV tech to reveal that the problem is not a bad picture tube....which is rare in your case! Good Luck and thanks for asking!

Jun 12, 2010 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

My 60 inch tv is not turning on do i need it


Was this tv made between 1995 and 1997? The problem is in the large signal board. It has the flyback on it. You will need to find a servicer.

Sep 16, 2009 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

I have a Magnovox HD TV Progressive Scan (Floor Model) TV


You can find a replacement Philips/Magnavox fresnel screen, in stock, for this model (51MP392H/17) at this following link from a major parts distributor:

Philips / Magnavox 51MP392H Replacement Part Fresnel Screen

And here's a link for the Lenticular (middle) Screen, if needed:

Philips / Magnavox 51MP392H Replacement Part Lenticular Screen

Jan 16, 2009 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

No color adjustment or convergence


You need to replace both convergence ICs they are both STK3920110 Ics you may also need a couple of the 6.8 ohm 1/2 watt resistors as that chassis will usually open a couple of the 6.8 resistors. you can get repalcement ICs and resistors at the following link.
http://servicemanuals.vstore.ca/

Jul 04, 2008 | Philips Magnavox 9P6034C 60" Rear...

2 Answers

Buttons won't work


You will probably need the service manual for both chassis to straighten that out. I am posting a link where you can purchase one manual that covers the entire series for magnavox PTV 836-PTV 835 it has 2,440 pages. It cost 19.99 and they will email it to you and provide you with free unlimited support that goes with the manual purchase. here is the link if interested in getting the service manual.
http://servicemanuals.vstore.ca/

Jan 23, 2008 | Philips Magnavox 9P6034C 60" Rear...

Not finding what you are looking for?
Philips Magnavox 9P6034C 60" Rear Projection Television Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75169 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...